1.0.0[][src]Struct std::collections::vec_deque::VecDeque

pub struct VecDeque<T> { /* fields omitted */ }

A double-ended queue implemented with a growable ring buffer.

The "default" usage of this type as a queue is to use push_back to add to the queue, and pop_front to remove from the queue. extend and append push onto the back in this manner, and iterating over VecDeque goes front to back.

Methods

impl<T> VecDeque<T>[src]

pub fn new() -> VecDeque<T>[src]

Creates an empty VecDeque.

Examples

use std::collections::VecDeque;

let vector: VecDeque<u32> = VecDeque::new();Run

pub fn with_capacity(capacity: usize) -> VecDeque<T>[src]

Creates an empty VecDeque with space for at least capacity elements.

Examples

use std::collections::VecDeque;

let vector: VecDeque<u32> = VecDeque::with_capacity(10);Run

pub fn get(&self, index: usize) -> Option<&T>[src]

Retrieves an element in the VecDeque by index.

Element at index 0 is the front of the queue.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::new();
buf.push_back(3);
buf.push_back(4);
buf.push_back(5);
assert_eq!(buf.get(1), Some(&4));Run

pub fn get_mut(&mut self, index: usize) -> Option<&mut T>[src]

Retrieves an element in the VecDeque mutably by index.

Element at index 0 is the front of the queue.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::new();
buf.push_back(3);
buf.push_back(4);
buf.push_back(5);
if let Some(elem) = buf.get_mut(1) {
    *elem = 7;
}

assert_eq!(buf[1], 7);Run

pub fn swap(&mut self, i: usize, j: usize)[src]

Swaps elements at indices i and j.

i and j may be equal.

Element at index 0 is the front of the queue.

Panics

Panics if either index is out of bounds.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::new();
buf.push_back(3);
buf.push_back(4);
buf.push_back(5);
assert_eq!(buf, [3, 4, 5]);
buf.swap(0, 2);
assert_eq!(buf, [5, 4, 3]);Run

pub fn capacity(&self) -> usize[src]

Returns the number of elements the VecDeque can hold without reallocating.

Examples

use std::collections::VecDeque;

let buf: VecDeque<i32> = VecDeque::with_capacity(10);
assert!(buf.capacity() >= 10);Run

pub fn reserve_exact(&mut self, additional: usize)[src]

Reserves the minimum capacity for exactly additional more elements to be inserted in the given VecDeque. Does nothing if the capacity is already sufficient.

Note that the allocator may give the collection more space than it requests. Therefore capacity can not be relied upon to be precisely minimal. Prefer reserve if future insertions are expected.

Panics

Panics if the new capacity overflows usize.

Examples

use std::collections::VecDeque;

let mut buf: VecDeque<i32> = vec![1].into_iter().collect();
buf.reserve_exact(10);
assert!(buf.capacity() >= 11);Run

pub fn reserve(&mut self, additional: usize)[src]

Reserves capacity for at least additional more elements to be inserted in the given VecDeque. The collection may reserve more space to avoid frequent reallocations.

Panics

Panics if the new capacity overflows usize.

Examples

use std::collections::VecDeque;

let mut buf: VecDeque<i32> = vec![1].into_iter().collect();
buf.reserve(10);
assert!(buf.capacity() >= 11);Run

pub fn try_reserve_exact(
    &mut self,
    additional: usize
) -> Result<(), CollectionAllocErr>
[src]

🔬 This is a nightly-only experimental API. (try_reserve #48043)

new API

Tries to reserves the minimum capacity for exactly additional more elements to be inserted in the given VecDeque<T>. After calling reserve_exact, capacity will be greater than or equal to self.len() + additional. Does nothing if the capacity is already sufficient.

Note that the allocator may give the collection more space than it requests. Therefore, capacity can not be relied upon to be precisely minimal. Prefer reserve if future insertions are expected.

Errors

If the capacity overflows, or the allocator reports a failure, then an error is returned.

Examples

#![feature(try_reserve)]
use std::collections::CollectionAllocErr;
use std::collections::VecDeque;

fn process_data(data: &[u32]) -> Result<VecDeque<u32>, CollectionAllocErr> {
    let mut output = VecDeque::new();

    // Pre-reserve the memory, exiting if we can't
    output.try_reserve_exact(data.len())?;

    // Now we know this can't OOM in the middle of our complex work
    output.extend(data.iter().map(|&val| {
        val * 2 + 5 // very complicated
    }));

    Ok(output)
}Run

pub fn try_reserve(
    &mut self,
    additional: usize
) -> Result<(), CollectionAllocErr>
[src]

🔬 This is a nightly-only experimental API. (try_reserve #48043)

new API

Tries to reserve capacity for at least additional more elements to be inserted in the given VecDeque<T>. The collection may reserve more space to avoid frequent reallocations. After calling reserve, capacity will be greater than or equal to self.len() + additional. Does nothing if capacity is already sufficient.

Errors

If the capacity overflows, or the allocator reports a failure, then an error is returned.

Examples

#![feature(try_reserve)]
use std::collections::CollectionAllocErr;
use std::collections::VecDeque;

fn process_data(data: &[u32]) -> Result<VecDeque<u32>, CollectionAllocErr> {
    let mut output = VecDeque::new();

    // Pre-reserve the memory, exiting if we can't
    output.try_reserve(data.len())?;

    // Now we know this can't OOM in the middle of our complex work
    output.extend(data.iter().map(|&val| {
        val * 2 + 5 // very complicated
    }));

    Ok(output)
}Run

pub fn shrink_to_fit(&mut self)1.5.0[src]

Shrinks the capacity of the VecDeque as much as possible.

It will drop down as close as possible to the length but the allocator may still inform the VecDeque that there is space for a few more elements.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::with_capacity(15);
buf.extend(0..4);
assert_eq!(buf.capacity(), 15);
buf.shrink_to_fit();
assert!(buf.capacity() >= 4);Run

pub fn shrink_to(&mut self, min_capacity: usize)[src]

🔬 This is a nightly-only experimental API. (shrink_to #56431)

new API

Shrinks the capacity of the VecDeque with a lower bound.

The capacity will remain at least as large as both the length and the supplied value.

Panics if the current capacity is smaller than the supplied minimum capacity.

Examples

#![feature(shrink_to)]
use std::collections::VecDeque;

let mut buf = VecDeque::with_capacity(15);
buf.extend(0..4);
assert_eq!(buf.capacity(), 15);
buf.shrink_to(6);
assert!(buf.capacity() >= 6);
buf.shrink_to(0);
assert!(buf.capacity() >= 4);Run

pub fn truncate(&mut self, len: usize)1.16.0[src]

Shortens the VecDeque, dropping excess elements from the back.

If len is greater than the VecDeque's current length, this has no effect.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::new();
buf.push_back(5);
buf.push_back(10);
buf.push_back(15);
assert_eq!(buf, [5, 10, 15]);
buf.truncate(1);
assert_eq!(buf, [5]);Run

Important traits for Iter<'a, T>
pub fn iter(&self) -> Iter<T>[src]

Returns a front-to-back iterator.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::new();
buf.push_back(5);
buf.push_back(3);
buf.push_back(4);
let b: &[_] = &[&5, &3, &4];
let c: Vec<&i32> = buf.iter().collect();
assert_eq!(&c[..], b);Run

Important traits for IterMut<'a, T>
pub fn iter_mut(&mut self) -> IterMut<T>[src]

Returns a front-to-back iterator that returns mutable references.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::new();
buf.push_back(5);
buf.push_back(3);
buf.push_back(4);
for num in buf.iter_mut() {
    *num = *num - 2;
}
let b: &[_] = &[&mut 3, &mut 1, &mut 2];
assert_eq!(&buf.iter_mut().collect::<Vec<&mut i32>>()[..], b);Run

pub fn as_slices(&self) -> (&[T], &[T])1.5.0[src]

Returns a pair of slices which contain, in order, the contents of the VecDeque.

Examples

use std::collections::VecDeque;

let mut vector = VecDeque::new();

vector.push_back(0);
vector.push_back(1);
vector.push_back(2);

assert_eq!(vector.as_slices(), (&[0, 1, 2][..], &[][..]));

vector.push_front(10);
vector.push_front(9);

assert_eq!(vector.as_slices(), (&[9, 10][..], &[0, 1, 2][..]));Run

pub fn as_mut_slices(&mut self) -> (&mut [T], &mut [T])1.5.0[src]

Returns a pair of slices which contain, in order, the contents of the VecDeque.

Examples

use std::collections::VecDeque;

let mut vector = VecDeque::new();

vector.push_back(0);
vector.push_back(1);

vector.push_front(10);
vector.push_front(9);

vector.as_mut_slices().0[0] = 42;
vector.as_mut_slices().1[0] = 24;
assert_eq!(vector.as_slices(), (&[42, 10][..], &[24, 1][..]));Run

pub fn len(&self) -> usize[src]

Returns the number of elements in the VecDeque.

Examples

use std::collections::VecDeque;

let mut v = VecDeque::new();
assert_eq!(v.len(), 0);
v.push_back(1);
assert_eq!(v.len(), 1);Run

pub fn is_empty(&self) -> bool[src]

Returns true if the VecDeque is empty.

Examples

use std::collections::VecDeque;

let mut v = VecDeque::new();
assert!(v.is_empty());
v.push_front(1);
assert!(!v.is_empty());Run

Important traits for Drain<'_, T>
pub fn drain<R>(&mut self, range: R) -> Drain<T> where
    R: RangeBounds<usize>, 
1.6.0[src]

Creates a draining iterator that removes the specified range in the VecDeque and yields the removed items.

Note 1: The element range is removed even if the iterator is not consumed until the end.

Note 2: It is unspecified how many elements are removed from the deque, if the Drain value is not dropped, but the borrow it holds expires (e.g., due to mem::forget).

Panics

Panics if the starting point is greater than the end point or if the end point is greater than the length of the vector.

Examples

use std::collections::VecDeque;

let mut v: VecDeque<_> = vec![1, 2, 3].into_iter().collect();
let drained = v.drain(2..).collect::<VecDeque<_>>();
assert_eq!(drained, [3]);
assert_eq!(v, [1, 2]);

// A full range clears all contents
v.drain(..);
assert!(v.is_empty());Run

pub fn clear(&mut self)[src]

Clears the VecDeque, removing all values.

Examples

use std::collections::VecDeque;

let mut v = VecDeque::new();
v.push_back(1);
v.clear();
assert!(v.is_empty());Run

pub fn contains(&self, x: &T) -> bool where
    T: PartialEq<T>, 
1.12.0[src]

Returns true if the VecDeque contains an element equal to the given value.

Examples

use std::collections::VecDeque;

let mut vector: VecDeque<u32> = VecDeque::new();

vector.push_back(0);
vector.push_back(1);

assert_eq!(vector.contains(&1), true);
assert_eq!(vector.contains(&10), false);Run

pub fn front(&self) -> Option<&T>[src]

Provides a reference to the front element, or None if the VecDeque is empty.

Examples

use std::collections::VecDeque;

let mut d = VecDeque::new();
assert_eq!(d.front(), None);

d.push_back(1);
d.push_back(2);
assert_eq!(d.front(), Some(&1));Run

pub fn front_mut(&mut self) -> Option<&mut T>[src]

Provides a mutable reference to the front element, or None if the VecDeque is empty.

Examples

use std::collections::VecDeque;

let mut d = VecDeque::new();
assert_eq!(d.front_mut(), None);

d.push_back(1);
d.push_back(2);
match d.front_mut() {
    Some(x) => *x = 9,
    None => (),
}
assert_eq!(d.front(), Some(&9));Run

pub fn back(&self) -> Option<&T>[src]

Provides a reference to the back element, or None if the VecDeque is empty.

Examples

use std::collections::VecDeque;

let mut d = VecDeque::new();
assert_eq!(d.back(), None);

d.push_back(1);
d.push_back(2);
assert_eq!(d.back(), Some(&2));Run

pub fn back_mut(&mut self) -> Option<&mut T>[src]

Provides a mutable reference to the back element, or None if the VecDeque is empty.

Examples

use std::collections::VecDeque;

let mut d = VecDeque::new();
assert_eq!(d.back(), None);

d.push_back(1);
d.push_back(2);
match d.back_mut() {
    Some(x) => *x = 9,
    None => (),
}
assert_eq!(d.back(), Some(&9));Run

pub fn pop_front(&mut self) -> Option<T>[src]

Removes the first element and returns it, or None if the VecDeque is empty.

Examples

use std::collections::VecDeque;

let mut d = VecDeque::new();
d.push_back(1);
d.push_back(2);

assert_eq!(d.pop_front(), Some(1));
assert_eq!(d.pop_front(), Some(2));
assert_eq!(d.pop_front(), None);Run

pub fn push_front(&mut self, value: T)[src]

Prepends an element to the VecDeque.

Examples

use std::collections::VecDeque;

let mut d = VecDeque::new();
d.push_front(1);
d.push_front(2);
assert_eq!(d.front(), Some(&2));Run

pub fn push_back(&mut self, value: T)[src]

Appends an element to the back of the VecDeque.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::new();
buf.push_back(1);
buf.push_back(3);
assert_eq!(3, *buf.back().unwrap());Run

pub fn pop_back(&mut self) -> Option<T>[src]

Removes the last element from the VecDeque and returns it, or None if it is empty.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::new();
assert_eq!(buf.pop_back(), None);
buf.push_back(1);
buf.push_back(3);
assert_eq!(buf.pop_back(), Some(3));Run

pub fn swap_remove_back(&mut self, index: usize) -> Option<T>1.5.0[src]

Removes an element from anywhere in the VecDeque and returns it, replacing it with the last element.

This does not preserve ordering, but is O(1).

Returns None if index is out of bounds.

Element at index 0 is the front of the queue.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::new();
assert_eq!(buf.swap_remove_back(0), None);
buf.push_back(1);
buf.push_back(2);
buf.push_back(3);
assert_eq!(buf, [1, 2, 3]);

assert_eq!(buf.swap_remove_back(0), Some(1));
assert_eq!(buf, [3, 2]);Run

pub fn swap_remove_front(&mut self, index: usize) -> Option<T>1.5.0[src]

Removes an element from anywhere in the VecDeque and returns it, replacing it with the first element.

This does not preserve ordering, but is O(1).

Returns None if index is out of bounds.

Element at index 0 is the front of the queue.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::new();
assert_eq!(buf.swap_remove_front(0), None);
buf.push_back(1);
buf.push_back(2);
buf.push_back(3);
assert_eq!(buf, [1, 2, 3]);

assert_eq!(buf.swap_remove_front(2), Some(3));
assert_eq!(buf, [2, 1]);Run

pub fn insert(&mut self, index: usize, value: T)1.5.0[src]

Inserts an element at index within the VecDeque, shifting all elements with indices greater than or equal to index towards the back.

Element at index 0 is the front of the queue.

Panics

Panics if index is greater than VecDeque's length

Examples

use std::collections::VecDeque;

let mut vec_deque = VecDeque::new();
vec_deque.push_back('a');
vec_deque.push_back('b');
vec_deque.push_back('c');
assert_eq!(vec_deque, &['a', 'b', 'c']);

vec_deque.insert(1, 'd');
assert_eq!(vec_deque, &['a', 'd', 'b', 'c']);Run

pub fn remove(&mut self, index: usize) -> Option<T>[src]

Removes and returns the element at index from the VecDeque. Whichever end is closer to the removal point will be moved to make room, and all the affected elements will be moved to new positions. Returns None if index is out of bounds.

Element at index 0 is the front of the queue.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::new();
buf.push_back(1);
buf.push_back(2);
buf.push_back(3);
assert_eq!(buf, [1, 2, 3]);

assert_eq!(buf.remove(1), Some(2));
assert_eq!(buf, [1, 3]);Run

pub fn split_off(&mut self, at: usize) -> VecDeque<T>1.4.0[src]

Splits the VecDeque into two at the given index.

Returns a newly allocated VecDeque. self contains elements [0, at), and the returned VecDeque contains elements [at, len).

Note that the capacity of self does not change.

Element at index 0 is the front of the queue.

Panics

Panics if at > len.

Examples

use std::collections::VecDeque;

let mut buf: VecDeque<_> = vec![1,2,3].into_iter().collect();
let buf2 = buf.split_off(1);
assert_eq!(buf, [1]);
assert_eq!(buf2, [2, 3]);Run

pub fn append(&mut self, other: &mut VecDeque<T>)1.4.0[src]

Moves all the elements of other into Self, leaving other empty.

Panics

Panics if the new number of elements in self overflows a usize.

Examples

use std::collections::VecDeque;

let mut buf: VecDeque<_> = vec![1, 2].into_iter().collect();
let mut buf2: VecDeque<_> = vec![3, 4].into_iter().collect();
buf.append(&mut buf2);
assert_eq!(buf, [1, 2, 3, 4]);
assert_eq!(buf2, []);Run

pub fn retain<F>(&mut self, f: F) where
    F: FnMut(&T) -> bool
1.4.0[src]

Retains only the elements specified by the predicate.

In other words, remove all elements e such that f(&e) returns false. This method operates in place, visiting each element exactly once in the original order, and preserves the order of the retained elements.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::new();
buf.extend(1..5);
buf.retain(|&x| x%2 == 0);
assert_eq!(buf, [2, 4]);Run

The exact order may be useful for tracking external state, like an index.

use std::collections::VecDeque;

let mut buf = VecDeque::new();
buf.extend(1..6);

let keep = [false, true, true, false, true];
let mut i = 0;
buf.retain(|_| (keep[i], i += 1).0);
assert_eq!(buf, [2, 3, 5]);Run

pub fn resize_with<impl FnMut() -> T>(
    &mut self,
    new_len: usize,
    generator: impl FnMut() -> T
) where
    impl FnMut() -> T: FnMut() -> T, 
1.33.0[src]

Modifies the VecDeque in-place so that len() is equal to new_len, either by removing excess elements from the back or by appending elements generated by calling generator to the back.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::new();
buf.push_back(5);
buf.push_back(10);
buf.push_back(15);
assert_eq!(buf, [5, 10, 15]);

buf.resize_with(5, Default::default);
assert_eq!(buf, [5, 10, 15, 0, 0]);

buf.resize_with(2, || unreachable!());
assert_eq!(buf, [5, 10]);

let mut state = 100;
buf.resize_with(5, || { state += 1; state });
assert_eq!(buf, [5, 10, 101, 102, 103]);Run

pub fn rotate_left(&mut self, mid: usize)1.36.0[src]

Rotates the double-ended queue mid places to the left.

Equivalently,

  • Rotates item mid into the first position.
  • Pops the first mid items and pushes them to the end.
  • Rotates len() - mid places to the right.

Panics

If mid is greater than len(). Note that mid == len() does not panic and is a no-op rotation.

Complexity

Takes O(min(mid, len() - mid)) time and no extra space.

Examples

use std::collections::VecDeque;

let mut buf: VecDeque<_> = (0..10).collect();

buf.rotate_left(3);
assert_eq!(buf, [3, 4, 5, 6, 7, 8, 9, 0, 1, 2]);

for i in 1..10 {
    assert_eq!(i * 3 % 10, buf[0]);
    buf.rotate_left(3);
}
assert_eq!(buf, [0, 1, 2, 3, 4, 5, 6, 7, 8, 9]);Run

pub fn rotate_right(&mut self, k: usize)1.36.0[src]

Rotates the double-ended queue k places to the right.

Equivalently,

  • Rotates the first item into position k.
  • Pops the last k items and pushes them to the front.
  • Rotates len() - k places to the left.

Panics

If k is greater than len(). Note that k == len() does not panic and is a no-op rotation.

Complexity

Takes O(min(k, len() - k)) time and no extra space.

Examples

use std::collections::VecDeque;

let mut buf: VecDeque<_> = (0..10).collect();

buf.rotate_right(3);
assert_eq!(buf, [7, 8, 9, 0, 1, 2, 3, 4, 5, 6]);

for i in 1..10 {
    assert_eq!(0, buf[i * 3 % 10]);
    buf.rotate_right(3);
}
assert_eq!(buf, [0, 1, 2, 3, 4, 5, 6, 7, 8, 9]);Run

impl<T> VecDeque<T> where
    T: Clone
[src]

pub fn resize(&mut self, new_len: usize, value: T)1.16.0[src]

Modifies the VecDeque in-place so that len() is equal to new_len, either by removing excess elements from the back or by appending clones of value to the back.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::new();
buf.push_back(5);
buf.push_back(10);
buf.push_back(15);
assert_eq!(buf, [5, 10, 15]);

buf.resize(2, 0);
assert_eq!(buf, [5, 10]);

buf.resize(5, 20);
assert_eq!(buf, [5, 10, 20, 20, 20]);Run

Trait Implementations

impl<A> Eq for VecDeque<A> where
    A: Eq
[src]

impl<A> IndexMut<usize> for VecDeque<A>[src]

impl<A> Extend<A> for VecDeque<A>[src]

impl<'a, T> Extend<&'a T> for VecDeque<T> where
    T: 'a + Copy
1.2.0[src]

impl<A> PartialOrd<VecDeque<A>> for VecDeque<A> where
    A: PartialOrd<A>, 
[src]

#[must_use] fn lt(&self, other: &Rhs) -> bool[src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use] fn le(&self, other: &Rhs) -> bool[src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use] fn gt(&self, other: &Rhs) -> bool[src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use] fn ge(&self, other: &Rhs) -> bool[src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<A> Hash for VecDeque<A> where
    A: Hash
[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher
1.3.0[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<T> From<VecDeque<T>> for Vec<T>1.10.0[src]

impl<T> From<Vec<T>> for VecDeque<T>1.10.0[src]

impl<A> Ord for VecDeque<A> where
    A: Ord
[src]

fn max(self, other: Self) -> Self1.21.0[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self1.21.0[src]

Compares and returns the minimum of two values. Read more

fn clamp(self, min: Self, max: Self) -> Self[src]

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval. Read more

impl<A> Index<usize> for VecDeque<A>[src]

type Output = A

The returned type after indexing.

impl<'_, A, B> PartialEq<&'_ [B]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 29]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 2]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 31]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 29]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 9]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 25]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 10]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 26]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 19]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 16]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 15]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 32]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 18]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 16]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 5]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 0]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 6]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 8]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 14]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 22]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 1]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 26]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 18]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 15]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 24]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 23]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 32]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 19]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 29]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 3]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 4]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 31]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 25]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 11]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 5]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 26]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 17]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 14]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 25]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 30]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 32]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 18]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 21]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 30]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 5]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 21]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 14]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 6]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 20]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 24]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 19]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 20]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 20]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 13]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 17]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 15]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 9]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 8]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 27]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 0]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 7]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 28]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 30]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 23]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 11]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 24]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<Vec<B>> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 27]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 27]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 9]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 13]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 7]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 7]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 2]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 6]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 23]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 28]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 2]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 3]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 12]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 17]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 12]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 12]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 8]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 3]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 22]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 4]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 4]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A> PartialEq<VecDeque<A>> for VecDeque<A> where
    A: PartialEq<A>, 
[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 10]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 1]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 16]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 0]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 22]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 31]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 28]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<A, B> PartialEq<[B; 1]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 13]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 10]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B; 11]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B; 21]> for VecDeque<A> where
    A: PartialEq<B>, 
1.17.0[src]

#[must_use] fn ne(&self, other: &Rhs) -> bool[src]

This method tests for !=.

impl<T> Clone for VecDeque<T> where
    T: Clone
[src]

fn clone_from(&mut self, source: &Self)[src]

Performs copy-assignment from source. Read more

impl<T> IntoIterator for VecDeque<T>[src]

type Item = T

The type of the elements being iterated over.

type IntoIter = IntoIter<T>

Which kind of iterator are we turning this into?

Important traits for IntoIter<T>
fn into_iter(self) -> IntoIter<T>[src]

Consumes the VecDeque into a front-to-back iterator yielding elements by value.

impl<'a, T> IntoIterator for &'a mut VecDeque<T>[src]

type Item = &'a mut T

The type of the elements being iterated over.

type IntoIter = IterMut<'a, T>

Which kind of iterator are we turning this into?

impl<'a, T> IntoIterator for &'a VecDeque<T>[src]

type Item = &'a T

The type of the elements being iterated over.

type IntoIter = Iter<'a, T>

Which kind of iterator are we turning this into?

impl<T> Default for VecDeque<T>[src]

fn default() -> VecDeque<T>[src]

Creates an empty VecDeque<T>.

impl<T> Drop for VecDeque<T>[src]

impl<T> Debug for VecDeque<T> where
    T: Debug
[src]

impl<A> FromIterator<A> for VecDeque<A>[src]

Auto Trait Implementations

impl<T> Send for VecDeque<T> where
    T: Send

impl<T> Sync for VecDeque<T> where
    T: Sync

Blanket Implementations

impl<T, U> TryFrom<U> for T where
    U: Into<T>, 
[src]

type Error = Infallible

The type returned in the event of a conversion error.

impl<I> IntoIterator for I where
    I: Iterator
[src]

type Item = <I as Iterator>::Item

The type of the elements being iterated over.

type IntoIter = I

Which kind of iterator are we turning this into?

impl<T, U> Into<U> for T where
    U: From<T>, 
[src]

impl<T> From<T> for T[src]

impl<T, U> TryInto<U> for T where
    U: TryFrom<T>, 
[src]

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

impl<T> Borrow<T> for T where
    T: ?Sized
[src]

impl<T> BorrowMut<T> for T where
    T: ?Sized
[src]

impl<T> Any for T where
    T: 'static + ?Sized
[src]

impl<T> ToOwned for T where
    T: Clone
[src]

type Owned = T

The resulting type after obtaining ownership.