Primitive Type i32

The 32-bit signed integer type.

See also the std::i32 module.

Methods

impl i32

pub const fn min_value() -> i32

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

assert_eq!(i32::min_value(), -2147483648);

pub const fn max_value() -> i32

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

assert_eq!(i32::max_value(), 2147483647);

pub fn from_str_radix(src: &str, radix: u32) -> Result<i32, ParseIntError>

Converts a string slice in a given base to an integer.

The string is expected to be an optional + or - sign followed by digits. Leading and trailing whitespace represent an error. Digits are a subset of these characters, depending on radix:

• 0-9
• a-z
• A-Z

Panics

This function panics if radix is not in the range from 2 to 36.

Examples

Basic usage:

assert_eq!(i32::from_str_radix("A", 16), Ok(10));

pub const fn count_ones(self) -> u32

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

let n = 0b100_0000i32;

assert_eq!(n.count_ones(), 1);

pub const fn count_zeros(self) -> u32

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

assert_eq!(i32::max_value().count_zeros(), 1);

pub const fn leading_zeros(self) -> u32

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

let n = -1i32;

assert_eq!(n.leading_zeros(), 0);

pub const fn trailing_zeros(self) -> u32

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

let n = -4i32;

assert_eq!(n.trailing_zeros(), 2);

#[must_use = "this returns the result of the operation, without modifying the original"] pub const fn rotate_left(self, n: u32) -> i32

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as the << shifting operator!

Examples

Basic usage:

let n = 0x10000b3i32;
let m = 0xb301;

assert_eq!(n.rotate_left(8), m);

#[must_use = "this returns the result of the operation, without modifying the original"] pub const fn rotate_right(self, n: u32) -> i32

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as the >> shifting operator!

Examples

Basic usage:

let n = 0xb301i32;
let m = 0x10000b3;

assert_eq!(n.rotate_right(8), m);

pub const fn swap_bytes(self) -> i32

Reverses the byte order of the integer.

Examples

Basic usage:

let n = 0x12345678i32;

let m = n.swap_bytes();

assert_eq!(m, 0x78563412);

#[must_use] pub const fn reverse_bits(self) -> i32

Reverses the bit pattern of the integer.

Examples

Basic usage:

let n = 0x12345678i32;
let m = n.reverse_bits();

assert_eq!(m, 0x1e6a2c48);

pub const fn from_be(x: i32) -> i32

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

let n = 0x1Ai32;

if cfg!(target_endian = "big") {
    assert_eq!(i32::from_be(n), n)
} else {
    assert_eq!(i32::from_be(n), n.swap_bytes())
}

pub const fn from_le(x: i32) -> i32

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

let n = 0x1Ai32;

if cfg!(target_endian = "little") {
    assert_eq!(i32::from_le(n), n)
} else {
    assert_eq!(i32::from_le(n), n.swap_bytes())
}

pub const fn to_be(self) -> i32

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

let n = 0x1Ai32;

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

pub const fn to_le(self) -> i32

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

let n = 0x1Ai32;

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

#[must_use = "this returns the result of the operation, without modifying the original"] pub fn checked_add(self, rhs: i32) -> Option<i32>

Checked integer addition. Computes self + rhs, returning None if overflow occurred.

Examples

Basic usage:

assert_eq!((i32::max_value() - 2).checked_add(1), Some(i32::max_value() - 1));
assert_eq!((i32::max_value() - 2).checked_add(3), None);

#[must_use = "this returns the result of the operation, without modifying the original"] pub fn checked_sub(self, rhs: i32) -> Option<i32>

Checked integer subtraction. Computes self - rhs, returning None if overflow occurred.

Examples

Basic usage:

assert_eq!((i32::min_value() + 2).checked_sub(1), Some(i32::min_value() + 1));
assert_eq!((i32::min_value() + 2).checked_sub(3), None);

#[must_use = "this returns the result of the operation, without modifying the original"] pub fn checked_mul(self, rhs: i32) -> Option<i32>

Checked integer multiplication. Computes self * rhs, returning None if overflow occurred.

Examples

Basic usage:

assert_eq!(i32::max_value().checked_mul(1), Some(i32::max_value()));
assert_eq!(i32::max_value().checked_mul(2), None);

#[must_use = "this returns the result of the operation, without modifying the original"] pub fn checked_div(self, rhs: i32) -> Option<i32>

Checked integer division. Computes self / rhs, returning None if rhs == 0 or the division results in overflow.

Examples

Basic usage:

assert_eq!((i32::min_value() + 1).checked_div(-1), Some(2147483647));
assert_eq!(i32::min_value().checked_div(-1), None);
assert_eq!((1i32).checked_div(0), None);

#[must_use = "this returns the result of the operation, without modifying the original"] pub fn checked_div_euclid(self, rhs: i32) -> Option<i32>

🔬 This is a nightly-only experimental API. (euclidean_division #49048)

Checked Euclidean division. Computes self.div_euclid(rhs), returning None if rhs == 0 or the division results in overflow.

Examples

Basic usage:

#![feature(euclidean_division)]
assert_eq!((i32::min_value() + 1).checked_div_euclid(-1), Some(2147483647));
assert_eq!(i32::min_value().checked_div_euclid(-1), None);
assert_eq!((1i32).checked_div_euclid(0), None);

#[must_use = "this returns the result of the operation, without modifying the original"] pub fn checked_rem(self, rhs: i32) -> Option<i32>

Checked integer remainder. Computes self % rhs, returning None if rhs == 0 or the division results in overflow.

Examples

Basic usage:

use std::i32;

assert_eq!(5i32.checked_rem(2), Some(1));
assert_eq!(5i32.checked_rem(0), None);
assert_eq!(i32::MIN.checked_rem(-1), None);

#[must_use = "this returns the result of the operation, without modifying the original"] pub fn checked_rem_euclid(self, rhs: i32) -> Option<i32>

🔬 This is a nightly-only experimental API. (euclidean_division #49048)

Checked Euclidean remainder. Computes self.rem_euclid(rhs), returning None if rhs == 0 or the division results in overflow.

Examples

Basic usage:

#![feature(euclidean_division)]
use std::i32;

assert_eq!(5i32.checked_rem_euclid(2), Some(1));
assert_eq!(5i32.checked_rem_euclid(0), None);
assert_eq!(i32::MIN.checked_rem_euclid(-1), None);

pub fn checked_neg(self) -> Option<i32>

Checked negation. Computes -self, returning None if self == MIN.

Examples

Basic usage:

use std::i32;

assert_eq!(5i32.checked_neg(), Some(-5));
assert_eq!(i32::MIN.checked_neg(), None);

#[must_use = "this returns the result of the operation, without modifying the original"] pub fn checked_shl(self, rhs: u32) -> Option<i32>

Checked shift left. Computes self << rhs, returning None if rhs is larger than or equal to the number of bits in self.

Examples

Basic usage:

assert_eq!(0x1i32.checked_shl(4), Some(0x10));
assert_eq!(0x1i32.checked_shl(129), None);

#[must_use = "this returns the result of the operation, without modifying the original"] pub fn checked_shr(self, rhs: u32) -> Option<i32>

Checked shift right. Computes self >> rhs, returning None if rhs is larger than or equal to the number of bits in self.

Examples

Basic usage:

assert_eq!(0x10i32.checked_shr(4), Some(0x1));
assert_eq!(0x10i32.checked_shr(128), None);

pub fn checked_abs(self) -> Option<i32>

Checked absolute value. Computes self.abs(), returning None if self == MIN.

Examples

Basic usage:

use std::i32;

assert_eq!((-5i32).checked_abs(), Some(5));
assert_eq!(i32::MIN.checked_abs(), None);

#[must_use = "this returns the result of the operation, without modifying the original"] pub fn checked_pow(self, exp: u32) -> Option<i32>

Checked exponentiation. Computes self.pow(exp), returning None if overflow occurred.

Examples

Basic usage:

assert_eq!(8i32.checked_pow(2), Some(64));
assert_eq!(i32::max_value().checked_pow(2), None);

#[must_use = "this returns the result of the operation, without modifying the original"] pub fn saturating_add(self, rhs: i32) -> i32

Saturating integer addition. Computes self + rhs, saturating at the numeric bounds instead of overflowing.

Examples

Basic usage:

assert_eq!(100i32.saturating_add(1), 101);
assert_eq!(i32::max_value().saturating_add(100), i32::max_value());

#[must_use = "this returns the result of the operation, without modifying the original"] pub fn saturating_sub(self, rhs: i32) -> i32

Saturating integer subtraction. Computes self - rhs, saturating at the numeric bounds instead of overflowing.

Examples

Basic usage:

assert_eq!(100i32.saturating_sub(127), -27);
assert_eq!(i32::min_value().saturating_sub(100), i32::min_value());

pub fn saturating_neg(self) -> i32

🔬 This is a nightly-only experimental API. (saturating_neg #59983)

Saturating integer negation. Computes -self, returning MAX if self == MIN instead of overflowing.

Examples

Basic usage:

#![feature(saturating_neg)]
assert_eq!(100i32.saturating_neg(), -100);
assert_eq!((-100i32).saturating_neg(), 100);
assert_eq!(i32::min_value().saturating_neg(), i32::max_value());
assert_eq!(i32::max_value().saturating_neg(), i32::min_value() + 1);

pub fn saturating_abs(self) -> i32

🔬 This is a nightly-only experimental API. (saturating_neg #59983)

Saturating absolute value. Computes self.abs(), returning MAX if self == MIN instead of overflowing.

Examples

Basic usage:

#![feature(saturating_neg)]
assert_eq!(100i32.saturating_abs(), 100);
assert_eq!((-100i32).saturating_abs(), 100);
assert_eq!(i32::min_value().saturating_abs(), i32::max_value());
assert_eq!((i32::min_value() + 1).saturating_abs(), i32::max_value());

#[must_use = "this returns the result of the operation, without modifying the original"] pub fn saturating_mul(self, rhs: i32) -> i32

Saturating integer multiplication. Computes self * rhs, saturating at the numeric bounds instead of overflowing.

Examples

Basic usage:

use std::i32;

assert_eq!(10i32.saturating_mul(12), 120);
assert_eq!(i32::MAX.saturating_mul(10), i32::MAX);
assert_eq!(i32::MIN.saturating_mul(10), i32::MIN);

#[must_use = "this returns the result of the operation, without modifying the original"] pub fn saturating_pow(self, exp: u32) -> i32

Saturating integer exponentiation. Computes self.pow(exp), saturating at the numeric bounds instead of overflowing.

Examples

Basic usage:

use std::i32;

assert_eq!((-4i32).saturating_pow(3), -64);
assert_eq!(i32::MIN.saturating_pow(2), i32::MAX);
assert_eq!(i32::MIN.saturating_pow(3), i32::MIN);

#[must_use = "this returns the result of the operation, without modifying the original"] pub const fn wrapping_add(self, rhs: i32) -> i32

Wrapping (modular) addition. Computes self + rhs, wrapping around at the boundary of the type.

Examples

Basic usage:

assert_eq!(100i32.wrapping_add(27), 127);
assert_eq!(i32::max_value().wrapping_add(2), i32::min_value() + 1);

#[must_use = "this returns the result of the operation, without modifying the original"] pub const fn wrapping_sub(self, rhs: i32) -> i32

Wrapping (modular) subtraction. Computes self - rhs, wrapping around at the boundary of the type.

Examples

Basic usage:

assert_eq!(0i32.wrapping_sub(127), -127);
assert_eq!((-2i32).wrapping_sub(i32::max_value()), i32::max_value());

#[must_use = "this returns the result of the operation, without modifying the original"] pub const fn wrapping_mul(self, rhs: i32) -> i32

Wrapping (modular) multiplication. Computes self * rhs, wrapping around at the boundary of the type.

Examples

Basic usage:

assert_eq!(10i32.wrapping_mul(12), 120);
assert_eq!(11i8.wrapping_mul(12), -124);

#[must_use = "this returns the result of the operation, without modifying the original"] pub fn wrapping_div(self, rhs: i32) -> i32

Wrapping (modular) division. Computes self / rhs, wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one divides MIN / -1 on a signed type (where MIN is the negative minimal value for the type); this is equivalent to -MIN, a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Panics

This function will panic if rhs is 0.

Examples

Basic usage:

assert_eq!(100i32.wrapping_div(10), 10);
assert_eq!((-128i8).wrapping_div(-1), -128);

#[must_use = "this returns the result of the operation, without modifying the original"] pub fn wrapping_div_euclid(self, rhs: i32) -> i32

🔬 This is a nightly-only experimental API. (euclidean_division #49048)

Wrapping Euclidean division. Computes self.div_euclid(rhs), wrapping around at the boundary of the type.

Wrapping will only occur in MIN / -1 on a signed type (where MIN is the negative minimal value for the type). This is equivalent to -MIN, a positive value that is too large to represent in the type. In this case, this method returns MIN itself.

Panics

This function will panic if rhs is 0.

Examples

Basic usage:

#![feature(euclidean_division)]
assert_eq!(100i32.wrapping_div_euclid(10), 10);
assert_eq!((-128i8).wrapping_div_euclid(-1), -128);

#[must_use = "this returns the result of the operation, without modifying the original"] pub fn wrapping_rem(self, rhs: i32) -> i32

Wrapping (modular) remainder. Computes self % rhs, wrapping around at the boundary of the type.

Such wrap-around never actually occurs mathematically; implementation artifacts make x % y invalid for MIN / -1 on a signed type (where MIN is the negative minimal value). In such a case, this function returns 0.

Panics

This function will panic if rhs is 0.

Examples

Basic usage:

assert_eq!(100i32.wrapping_rem(10), 0);
assert_eq!((-128i8).wrapping_rem(-1), 0);

#[must_use = "this returns the result of the operation, without modifying the original"] pub fn wrapping_rem_euclid(self, rhs: i32) -> i32

🔬 This is a nightly-only experimental API. (euclidean_division #49048)

Wrapping Euclidean remainder. Computes self.rem_euclid(rhs), wrapping around at the boundary of the type.

Wrapping will only occur in MIN % -1 on a signed type (where MIN is the negative minimal value for the type). In this case, this method returns 0.

Panics

This function will panic if rhs is 0.

Examples

Basic usage:

#![feature(euclidean_division)]
assert_eq!(100i32.wrapping_rem_euclid(10), 0);
assert_eq!((-128i8).wrapping_rem_euclid(-1), 0);

pub const fn wrapping_neg(self) -> i32

Wrapping (modular) negation. Computes -self, wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one negates MIN on a signed type (where MIN is the negative minimal value for the type); this is a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Examples

Basic usage:

assert_eq!(100i32.wrapping_neg(), -100);
assert_eq!(i32::min_value().wrapping_neg(), i32::min_value());

#[must_use = "this returns the result of the operation, without modifying the original"] pub const fn wrapping_shl(self, rhs: u32) -> i32

Panic-free bitwise shift-left; yields self << mask(rhs), where mask removes any high-order bits of rhs that would cause the shift to exceed the bitwidth of the type.

Note that this is not the same as a rotate-left; the RHS of a wrapping shift-left is restricted to the range of the type, rather than the bits shifted out of the LHS being returned to the other end. The primitive integer types all implement a rotate_left function, which may be what you want instead.

Examples

Basic usage:

assert_eq!((-1i32).wrapping_shl(7), -128);
assert_eq!((-1i32).wrapping_shl(128), -1);

#[must_use = "this returns the result of the operation, without modifying the original"] pub const fn wrapping_shr(self, rhs: u32) -> i32

Panic-free bitwise shift-right; yields self >> mask(rhs), where mask removes any high-order bits of rhs that would cause the shift to exceed the bitwidth of the type.

Note that this is not the same as a rotate-right; the RHS of a wrapping shift-right is restricted to the range of the type, rather than the bits shifted out of the LHS being returned to the other end. The primitive integer types all implement a rotate_right function, which may be what you want instead.

Examples

Basic usage:

assert_eq!((-128i32).wrapping_shr(7), -1);
assert_eq!((-128i16).wrapping_shr(64), -128);

pub fn wrapping_abs(self) -> i32

Wrapping (modular) absolute value. Computes self.abs(), wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one takes the absolute value of the negative minimal value for the type this is a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Examples

Basic usage:

assert_eq!(100i32.wrapping_abs(), 100);
assert_eq!((-100i32).wrapping_abs(), 100);
assert_eq!(i32::min_value().wrapping_abs(), i32::min_value());
assert_eq!((-128i8).wrapping_abs() as u8, 128);

#[must_use = "this returns the result of the operation, without modifying the original"] pub fn wrapping_pow(self, exp: u32) -> i32

Wrapping (modular) exponentiation. Computes self.pow(exp), wrapping around at the boundary of the type.

Examples

Basic usage:

assert_eq!(3i32.wrapping_pow(4), 81);
assert_eq!(3i8.wrapping_pow(5), -13);
assert_eq!(3i8.wrapping_pow(6), -39);

#[must_use = "this returns the result of the operation, without modifying the original"] pub const fn overflowing_add(self, rhs: i32) -> (i32, bool)

Calculates self + rhs

Returns a tuple of the addition along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would have occurred then the wrapped value is returned.

Examples

Basic usage:

use std::i32;

assert_eq!(5i32.overflowing_add(2), (7, false));
assert_eq!(i32::MAX.overflowing_add(1), (i32::MIN, true));

#[must_use = "this returns the result of the operation, without modifying the original"] pub const fn overflowing_sub(self, rhs: i32) -> (i32, bool)

Calculates self - rhs

Returns a tuple of the subtraction along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would have occurred then the wrapped value is returned.

Examples

Basic usage:

use std::i32;

assert_eq!(5i32.overflowing_sub(2), (3, false));
assert_eq!(i32::MIN.overflowing_sub(1), (i32::MAX, true));

#[must_use = "this returns the result of the operation, without modifying the original"] pub const fn overflowing_mul(self, rhs: i32) -> (i32, bool)

Calculates the multiplication of self and rhs.

Returns a tuple of the multiplication along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would have occurred then the wrapped value is returned.

Examples

Basic usage:

assert_eq!(5i32.overflowing_mul(2), (10, false));
assert_eq!(1_000_000_000i32.overflowing_mul(10), (1410065408, true));

#[must_use = "this returns the result of the operation, without modifying the original"] pub fn overflowing_div(self, rhs: i32) -> (i32, bool)

Calculates the divisor when self is divided by rhs.

Returns a tuple of the divisor along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would occur then self is returned.

Panics

This function will panic if rhs is 0.

Examples

Basic usage:

use std::i32;

assert_eq!(5i32.overflowing_div(2), (2, false));
assert_eq!(i32::MIN.overflowing_div(-1), (i32::MIN, true));

#[must_use = "this returns the result of the operation, without modifying the original"] pub fn overflowing_div_euclid(self, rhs: i32) -> (i32, bool)

🔬 This is a nightly-only experimental API. (euclidean_division #49048)

Calculates the quotient of Euclidean division self.div_euclid(rhs).

Returns a tuple of the divisor along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would occur then self is returned.

Panics

This function will panic if rhs is 0.

Examples

Basic usage:

#![feature(euclidean_division)]
use std::i32;

assert_eq!(5i32.overflowing_div_euclid(2), (2, false));
assert_eq!(i32::MIN.overflowing_div_euclid(-1), (i32::MIN, true));

#[must_use = "this returns the result of the operation, without modifying the original"] pub fn overflowing_rem(self, rhs: i32) -> (i32, bool)

Calculates the remainder when self is divided by rhs.

Returns a tuple of the remainder after dividing along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would occur then 0 is returned.

Panics

This function will panic if rhs is 0.

Examples

Basic usage:

use std::i32;

assert_eq!(5i32.overflowing_rem(2), (1, false));
assert_eq!(i32::MIN.overflowing_rem(-1), (0, true));

#[must_use = "this returns the result of the operation, without modifying the original"] pub fn overflowing_rem_euclid(self, rhs: i32) -> (i32, bool)

🔬 This is a nightly-only experimental API. (euclidean_division #49048)

Overflowing Euclidean remainder. Calculates self.rem_euclid(rhs).

Returns a tuple of the remainder after dividing along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would occur then 0 is returned.

Panics

This function will panic if rhs is 0.

Examples

Basic usage:

#![feature(euclidean_division)]
use std::i32;

assert_eq!(5i32.overflowing_rem_euclid(2), (1, false));
assert_eq!(i32::MIN.overflowing_rem_euclid(-1), (0, true));

pub const fn overflowing_neg(self) -> (i32, bool)

Negates self, overflowing if this is equal to the minimum value.

Returns a tuple of the negated version of self along with a boolean indicating whether an overflow happened. If self is the minimum value (e.g., i32::MIN for values of type i32), then the minimum value will be returned again and true will be returned for an overflow happening.

Examples

Basic usage:

use std::i32;

assert_eq!(2i32.overflowing_neg(), (-2, false));
assert_eq!(i32::MIN.overflowing_neg(), (i32::MIN, true));

#[must_use = "this returns the result of the operation, without modifying the original"] pub const fn overflowing_shl(self, rhs: u32) -> (i32, bool)

Shifts self left by rhs bits.

Returns a tuple of the shifted version of self along with a boolean indicating whether the shift value was larger than or equal to the number of bits. If the shift value is too large, then value is masked (N-1) where N is the number of bits, and this value is then used to perform the shift.

Examples

Basic usage:

assert_eq!(0x1i32.overflowing_shl(4), (0x10, false));
assert_eq!(0x1i32.overflowing_shl(36), (0x10, true));

#[must_use = "this returns the result of the operation, without modifying the original"] pub const fn overflowing_shr(self, rhs: u32) -> (i32, bool)

Shifts self right by rhs bits.

Returns a tuple of the shifted version of self along with a boolean indicating whether the shift value was larger than or equal to the number of bits. If the shift value is too large, then value is masked (N-1) where N is the number of bits, and this value is then used to perform the shift.

Examples

Basic usage:

assert_eq!(0x10i32.overflowing_shr(4), (0x1, false));
assert_eq!(0x10i32.overflowing_shr(36), (0x1, true));

pub fn overflowing_abs(self) -> (i32, bool)

Computes the absolute value of self.

Returns a tuple of the absolute version of self along with a boolean indicating whether an overflow happened. If self is the minimum value (e.g., i32::MIN for values of type i32), then the minimum value will be returned again and true will be returned for an overflow happening.

Examples

Basic usage:

assert_eq!(10i32.overflowing_abs(), (10, false));
assert_eq!((-10i32).overflowing_abs(), (10, false));
assert_eq!((i32::min_value()).overflowing_abs(), (i32::min_value(), true));

#[must_use = "this returns the result of the operation, without modifying the original"] pub fn overflowing_pow(self, exp: u32) -> (i32, bool)

Raises self to the power of exp, using exponentiation by squaring.

Returns a tuple of the exponentiation along with a bool indicating whether an overflow happened.

Examples

Basic usage:

assert_eq!(3i32.overflowing_pow(4), (81, false));
assert_eq!(3i8.overflowing_pow(5), (-13, true));

#[must_use = "this returns the result of the operation, without modifying the original"] pub fn pow(self, exp: u32) -> i32

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

let x: i32 = 2; // or any other integer type

assert_eq!(x.pow(5), 32);

#[must_use = "this returns the result of the operation, without modifying the original"] pub fn div_euclid(self, rhs: i32) -> i32

🔬 This is a nightly-only experimental API. (euclidean_division #49048)

Calculates the quotient of Euclidean division of self by rhs.

This computes the integer n such that self = n * rhs + self.rem_euclid(rhs), with 0 <= self.rem_euclid(rhs) < rhs.

In other words, the result is self / rhs rounded to the integer n such that self >= n * rhs. If self > 0, this is equal to round towards zero (the default in Rust); if self < 0, this is equal to round towards +/- infinity.

Panics

This function will panic if rhs is 0.

Examples

Basic usage:

#![feature(euclidean_division)]
let a: i32 = 7; // or any other integer type
let b = 4;

assert_eq!(a.div_euclid(b), 1); // 7 >= 4 * 1
assert_eq!(a.div_euclid(-b), -1); // 7 >= -4 * -1
assert_eq!((-a).div_euclid(b), -2); // -7 >= 4 * -2
assert_eq!((-a).div_euclid(-b), 2); // -7 >= -4 * 2

#[must_use = "this returns the result of the operation, without modifying the original"] pub fn rem_euclid(self, rhs: i32) -> i32

🔬 This is a nightly-only experimental API. (euclidean_division #49048)

Calculates the least nonnegative remainder of self (mod rhs).

This is done as if by the Euclidean division algorithm -- given r = self.rem_euclid(rhs), self = rhs * self.div_euclid(rhs) + r, and 0 <= r < abs(rhs).

Panics

This function will panic if rhs is 0.

Examples

Basic usage:

#![feature(euclidean_division)]
let a: i32 = 7; // or any other integer type
let b = 4;

assert_eq!(a.rem_euclid(b), 3);
assert_eq!((-a).rem_euclid(b), 1);
assert_eq!(a.rem_euclid(-b), 3);
assert_eq!((-a).rem_euclid(-b), 1);

pub fn abs(self) -> i32

Computes the absolute value of self.

Overflow behavior

The absolute value of i32::min_value() cannot be represented as an i32, and attempting to calculate it will cause an overflow. This means that code in debug mode will trigger a panic on this case and optimized code will return i32::min_value() without a panic.

Examples

Basic usage:

assert_eq!(10i32.abs(), 10);
assert_eq!((-10i32).abs(), 10);

pub fn signum(self) -> i32

Returns a number representing sign of self.

• 0 if the number is zero
• 1 if the number is positive
• -1 if the number is negative

Examples

Basic usage:

assert_eq!(10i32.signum(), 1);
assert_eq!(0i32.signum(), 0);
assert_eq!((-10i32).signum(), -1);

pub const fn is_positive(self) -> bool

Returns true if self is positive and false if the number is zero or negative.

Examples

Basic usage:

assert!(10i32.is_positive());
assert!(!(-10i32).is_positive());

pub const fn is_negative(self) -> bool

Returns true if self is negative and false if the number is zero or positive.

Examples

Basic usage:

assert!((-10i32).is_negative());
assert!(!10i32.is_negative());

pub fn to_be_bytes(self) -> [u8; 4]

Return the memory representation of this integer as a byte array in big-endian (network) byte order.

Examples

let bytes = 0x12345678i32.to_be_bytes();
assert_eq!(bytes, [0x12, 0x34, 0x56, 0x78]);

pub fn to_le_bytes(self) -> [u8; 4]

Return the memory representation of this integer as a byte array in little-endian byte order.

Examples

let bytes = 0x12345678i32.to_le_bytes();
assert_eq!(bytes, [0x78, 0x56, 0x34, 0x12]);

pub fn to_ne_bytes(self) -> [u8; 4]

Return the memory representation of this integer as a byte array in native byte order.

As the target platform's native endianness is used, portable code should use to_be_bytes or to_le_bytes, as appropriate, instead.

Examples

let bytes = 0x12345678i32.to_ne_bytes();
assert_eq!(bytes, if cfg!(target_endian = "big") {
        [0x12, 0x34, 0x56, 0x78]
    } else {
        [0x78, 0x56, 0x34, 0x12]
    });

pub fn from_be_bytes(bytes: [u8; 4]) -> i32

Create an integer value from its representation as a byte array in big endian.

Examples

let value = i32::from_be_bytes([0x12, 0x34, 0x56, 0x78]);
assert_eq!(value, 0x12345678);

When starting from a slice rather than an array, fallible conversion APIs can be used:

use std::convert::TryInto;

fn read_be_i32(input: &mut &[u8]) -> i32 {
    let (int_bytes, rest) = input.split_at(std::mem::size_of::<i32>());
    *input = rest;
    i32::from_be_bytes(int_bytes.try_into().unwrap())
}

pub fn from_le_bytes(bytes: [u8; 4]) -> i32

Create an integer value from its representation as a byte array in little endian.

Examples

let value = i32::from_le_bytes([0x78, 0x56, 0x34, 0x12]);
assert_eq!(value, 0x12345678);

When starting from a slice rather than an array, fallible conversion APIs can be used:

use std::convert::TryInto;

fn read_le_i32(input: &mut &[u8]) -> i32 {
    let (int_bytes, rest) = input.split_at(std::mem::size_of::<i32>());
    *input = rest;
    i32::from_le_bytes(int_bytes.try_into().unwrap())
}

pub fn from_ne_bytes(bytes: [u8; 4]) -> i32

Create an integer value from its memory representation as a byte array in native endianness.

As the target platform's native endianness is used, portable code likely wants to use from_be_bytes or from_le_bytes, as appropriate instead.

Examples

let value = i32::from_ne_bytes(if cfg!(target_endian = "big") {
        [0x12, 0x34, 0x56, 0x78]
    } else {
        [0x78, 0x56, 0x34, 0x12]
    });
assert_eq!(value, 0x12345678);

When starting from a slice rather than an array, fallible conversion APIs can be used:

use std::convert::TryInto;

fn read_ne_i32(input: &mut &[u8]) -> i32 {
    let (int_bytes, rest) = input.split_at(std::mem::size_of::<i32>());
    *input = rest;
    i32::from_ne_bytes(int_bytes.try_into().unwrap())
}

Trait Implementations

impl From<i16> for i32

Converts i16 to i32 losslessly.

fn from(small: i16) -> i32

Performs the conversion.

impl From<u8> for i32

Converts u8 to i32 losslessly.

fn from(small: u8) -> i32

Performs the conversion.

impl From<u16> for i32

Converts u16 to i32 losslessly.

fn from(small: u16) -> i32

Performs the conversion.

impl From<NonZeroI32> for i32

fn from(nonzero: NonZeroI32) -> i32

Performs the conversion.

impl From<bool> for i32

Converts a bool to a i32. The resulting value is 0 for false and 1 for true values.

Examples

assert_eq!(i32::from(true), 1);
assert_eq!(i32::from(false), 0);

fn from(small: bool) -> i32

Performs the conversion.

impl From<i8> for i32

Converts i8 to i32 losslessly.

fn from(small: i8) -> i32

Performs the conversion.

impl<'_> Neg for &'_ i32

type Output = <i32 as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <i32 as Neg>::Output

Performs the unary - operation.

impl Neg for i32

type Output = i32

The resulting type after applying the - operator.

fn neg(self) -> i32

Performs the unary - operation.

impl Step for i32

fn steps_between(start: &i32, end: &i32) -> Option<usize>

🔬 This is a nightly-only experimental API. (step_trait #42168)

likely to be replaced by finer-grained traits

Returns the number of steps between two step objects. The count is inclusive of start and exclusive of end.

fn add_usize(&self, n: usize) -> Option<i32>

🔬 This is a nightly-only experimental API. (step_trait #42168)

likely to be replaced by finer-grained traits

Adds a usize, returning None on overflow.

fn sub_usize(&self, n: usize) -> Option<i32>

🔬 This is a nightly-only experimental API. (step_trait #42168)

likely to be replaced by finer-grained traits

Subtracts a usize, returning None on underflow.

fn replace_one(&mut self) -> i32

🔬 This is a nightly-only experimental API. (step_trait #42168)

likely to be replaced by finer-grained traits

Replaces this step with 1, returning itself.

fn replace_zero(&mut self) -> i32

🔬 This is a nightly-only experimental API. (step_trait #42168)

likely to be replaced by finer-grained traits

Replaces this step with 0, returning itself.

fn add_one(&self) -> i32

🔬 This is a nightly-only experimental API. (step_trait #42168)

likely to be replaced by finer-grained traits

Adds one to this step, returning the result.

fn sub_one(&self) -> i32

🔬 This is a nightly-only experimental API. (step_trait #42168)

likely to be replaced by finer-grained traits

Subtracts one to this step, returning the result.

impl Product<i32> for i32

fn product<I>(iter: I) -> i32 where
    I: Iterator<Item = i32>, 

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a i32> for i32

fn product<I>(iter: I) -> i32 where
    I: Iterator<Item = &'a i32>, 

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> BitAnd<i32> for &'a i32

type Output = <i32 as BitAnd<i32>>::Output

The resulting type after applying the & operator.

fn bitand(self, other: i32) -> <i32 as BitAnd<i32>>::Output

Performs the & operation.

impl<'_, '_> BitAnd<&'_ i32> for &'_ i32

type Output = <i32 as BitAnd<i32>>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &i32) -> <i32 as BitAnd<i32>>::Output

Performs the & operation.

impl<'_> BitAnd<&'_ i32> for i32

type Output = <i32 as BitAnd<i32>>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &i32) -> <i32 as BitAnd<i32>>::Output

Performs the & operation.

impl BitAnd<i32> for i32

type Output = i32

The resulting type after applying the & operator.

fn bitand(self, rhs: i32) -> i32

Performs the & operation.

impl<'_> BitOrAssign<&'_ i32> for i32

fn bitor_assign(&mut self, other: &i32)

Performs the |= operation.

impl BitOrAssign<i32> for i32

fn bitor_assign(&mut self, other: i32)

Performs the |= operation.

impl TryFrom<isize> for i32

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(u: isize) -> Result<i32, TryFromIntError>

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i128> for i32

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(u: i128) -> Result<i32, TryFromIntError>

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<usize> for i32

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(u: usize) -> Result<i32, TryFromIntError>

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u128> for i32

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(u: u128) -> Result<i32, TryFromIntError>

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i64> for i32

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(u: i64) -> Result<i32, TryFromIntError>

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u64> for i32

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(u: u64) -> Result<i32, TryFromIntError>

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u32> for i32

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(u: u32) -> Result<i32, TryFromIntError>

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl<'_> Mul<&'_ i32> for i32

type Output = <i32 as Mul<i32>>::Output

The resulting type after applying the * operator.

fn mul(self, other: &i32) -> <i32 as Mul<i32>>::Output

Performs the * operation.

impl<'a> Mul<i32> for &'a i32

type Output = <i32 as Mul<i32>>::Output

The resulting type after applying the * operator.

fn mul(self, other: i32) -> <i32 as Mul<i32>>::Output

Performs the * operation.

impl Mul<i32> for i32

type Output = i32

The resulting type after applying the * operator.

fn mul(self, other: i32) -> i32

Performs the * operation.

impl<'_, '_> Mul<&'_ i32> for &'_ i32

type Output = <i32 as Mul<i32>>::Output

The resulting type after applying the * operator.

fn mul(self, other: &i32) -> <i32 as Mul<i32>>::Output

Performs the * operation.

impl UpperHex for i32

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl<'_> ShrAssign<&'_ u8> for i32

fn shr_assign(&mut self, other: &u8)

Performs the >>= operation.

impl ShrAssign<i64> for i32

fn shr_assign(&mut self, other: i64)

Performs the >>= operation.

impl<'_> ShrAssign<&'_ i16> for i32

fn shr_assign(&mut self, other: &i16)

Performs the >>= operation.

impl ShrAssign<isize> for i32

fn shr_assign(&mut self, other: isize)

Performs the >>= operation.

impl<'_> ShrAssign<&'_ u16> for i32

fn shr_assign(&mut self, other: &u16)

Performs the >>= operation.

impl<'_> ShrAssign<&'_ i64> for i32

fn shr_assign(&mut self, other: &i64)

Performs the >>= operation.

impl<'_> ShrAssign<&'_ u64> for i32

fn shr_assign(&mut self, other: &u64)

Performs the >>= operation.

impl ShrAssign<u16> for i32

fn shr_assign(&mut self, other: u16)

Performs the >>= operation.

impl<'_> ShrAssign<&'_ usize> for i32

fn shr_assign(&mut self, other: &usize)

Performs the >>= operation.

impl<'_> ShrAssign<&'_ i128> for i32

fn shr_assign(&mut self, other: &i128)

Performs the >>= operation.

impl<'_> ShrAssign<&'_ i8> for i32

fn shr_assign(&mut self, other: &i8)

Performs the >>= operation.

impl<'_> ShrAssign<&'_ u128> for i32

fn shr_assign(&mut self, other: &u128)

Performs the >>= operation.

impl<'_> ShrAssign<&'_ i32> for i32

fn shr_assign(&mut self, other: &i32)

Performs the >>= operation.

impl ShrAssign<i128> for i32

fn shr_assign(&mut self, other: i128)

Performs the >>= operation.

impl ShrAssign<u128> for i32

fn shr_assign(&mut self, other: u128)

Performs the >>= operation.

impl ShrAssign<i16> for i32

fn shr_assign(&mut self, other: i16)

Performs the >>= operation.

impl<'_> ShrAssign<&'_ u32> for i32

fn shr_assign(&mut self, other: &u32)

Performs the >>= operation.

impl ShrAssign<u8> for i32

fn shr_assign(&mut self, other: u8)

Performs the >>= operation.

impl<'_> ShrAssign<&'_ isize> for i32

fn shr_assign(&mut self, other: &isize)

Performs the >>= operation.

impl ShrAssign<i8> for i32

fn shr_assign(&mut self, other: i8)

Performs the >>= operation.

impl ShrAssign<i32> for i32

fn shr_assign(&mut self, other: i32)

Performs the >>= operation.

impl ShrAssign<u64> for i32

fn shr_assign(&mut self, other: u64)

Performs the >>= operation.

impl ShrAssign<u32> for i32

fn shr_assign(&mut self, other: u32)

Performs the >>= operation.

impl ShrAssign<usize> for i32

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl MulAssign<i32> for i32

fn mul_assign(&mut self, other: i32)

Performs the *= operation.

impl<'_> MulAssign<&'_ i32> for i32

fn mul_assign(&mut self, other: &i32)

Performs the *= operation.

impl PartialOrd<i32> for i32

fn partial_cmp(&self, other: &i32) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &i32) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &i32) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &i32) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &i32) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl Hash for i32

fn hash<H>(&self, state: &mut H) where
    H: Hasher, 

Feeds this value into the given [Hasher].

fn hash_slice<H>(data: &[i32], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given [Hasher].

impl Octal for i32

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl Default for i32

fn default() -> i32

Returns the default value of 0

impl<'a> Sub<i32> for &'a i32

type Output = <i32 as Sub<i32>>::Output

The resulting type after applying the - operator.

fn sub(self, other: i32) -> <i32 as Sub<i32>>::Output

Performs the - operation.

impl<'_> Sub<&'_ i32> for i32

type Output = <i32 as Sub<i32>>::Output

The resulting type after applying the - operator.

fn sub(self, other: &i32) -> <i32 as Sub<i32>>::Output

Performs the - operation.

impl<'_, '_> Sub<&'_ i32> for &'_ i32

type Output = <i32 as Sub<i32>>::Output

The resulting type after applying the - operator.

fn sub(self, other: &i32) -> <i32 as Sub<i32>>::Output

Performs the - operation.

impl Sub<i32> for i32

type Output = i32

The resulting type after applying the - operator.

fn sub(self, other: i32) -> i32

Performs the - operation.

impl Eq for i32

impl Sum<i32> for i32

fn sum<I>(iter: I) -> i32 where
    I: Iterator<Item = i32>, 

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl<'a> Sum<&'a i32> for i32

fn sum<I>(iter: I) -> i32 where
    I: Iterator<Item = &'a i32>, 

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl Clone for i32

fn clone(&self) -> i32

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<'_> Not for &'_ i32

type Output = <i32 as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <i32 as Not>::Output

Performs the unary ! operation.

impl Not for i32

type Output = i32

The resulting type after applying the ! operator.

fn not(self) -> i32

Performs the unary ! operation.

impl ShlAssign<usize> for i32

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl ShlAssign<u64> for i32

fn shl_assign(&mut self, other: u64)

Performs the <<= operation.

impl ShlAssign<u8> for i32

fn shl_assign(&mut self, other: u8)

Performs the <<= operation.

impl<'_> ShlAssign<&'_ i32> for i32

fn shl_assign(&mut self, other: &i32)

Performs the <<= operation.

impl<'_> ShlAssign<&'_ u128> for i32

fn shl_assign(&mut self, other: &u128)

Performs the <<= operation.

impl<'_> ShlAssign<&'_ i128> for i32

fn shl_assign(&mut self, other: &i128)

Performs the <<= operation.

impl<'_> ShlAssign<&'_ i16> for i32

fn shl_assign(&mut self, other: &i16)

Performs the <<= operation.

impl ShlAssign<i16> for i32

fn shl_assign(&mut self, other: i16)

Performs the <<= operation.

impl<'_> ShlAssign<&'_ u16> for i32

fn shl_assign(&mut self, other: &u16)

Performs the <<= operation.

impl<'_> ShlAssign<&'_ isize> for i32

fn shl_assign(&mut self, other: &isize)

Performs the <<= operation.

impl ShlAssign<i32> for i32

fn shl_assign(&mut self, other: i32)

Performs the <<= operation.

impl<'_> ShlAssign<&'_ usize> for i32

fn shl_assign(&mut self, other: &usize)

Performs the <<= operation.

impl<'_> ShlAssign<&'_ i8> for i32

fn shl_assign(&mut self, other: &i8)

Performs the <<= operation.

impl<'_> ShlAssign<&'_ i64> for i32

fn shl_assign(&mut self, other: &i64)

Performs the <<= operation.

impl ShlAssign<i64> for i32

fn shl_assign(&mut self, other: i64)

Performs the <<= operation.

impl ShlAssign<u128> for i32

fn shl_assign(&mut self, other: u128)

Performs the <<= operation.

impl ShlAssign<i8> for i32

fn shl_assign(&mut self, other: i8)

Performs the <<= operation.

impl ShlAssign<u16> for i32

fn shl_assign(&mut self, other: u16)

Performs the <<= operation.

impl<'_> ShlAssign<&'_ u64> for i32

fn shl_assign(&mut self, other: &u64)

Performs the <<= operation.

impl ShlAssign<i128> for i32

fn shl_assign(&mut self, other: i128)

Performs the <<= operation.

impl<'_> ShlAssign<&'_ u32> for i32

fn shl_assign(&mut self, other: &u32)

Performs the <<= operation.

impl ShlAssign<isize> for i32

fn shl_assign(&mut self, other: isize)

Performs the <<= operation.

impl ShlAssign<u32> for i32

fn shl_assign(&mut self, other: u32)

Performs the <<= operation.

impl<'_> ShlAssign<&'_ u8> for i32

fn shl_assign(&mut self, other: &u8)

Performs the <<= operation.

impl<'_> Shr<&'_ u8> for i32

type Output = <i32 as Shr<u8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u8) -> <i32 as Shr<u8>>::Output

Performs the >> operation.

impl<'_, '_> Shr<&'_ i32> for &'_ i32

type Output = <i32 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i32) -> <i32 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<u128> for i32

type Output = i32

The resulting type after applying the >> operator.

fn shr(self, other: u128) -> i32

Performs the >> operation.

impl Shr<i8> for i32

type Output = i32

The resulting type after applying the >> operator.

fn shr(self, other: i8) -> i32

Performs the >> operation.

impl<'a> Shr<usize> for &'a i32

type Output = <i32 as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> <i32 as Shr<usize>>::Output

Performs the >> operation.

impl<'_, '_> Shr<&'_ u128> for &'_ i32

type Output = <i32 as Shr<u128>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u128) -> <i32 as Shr<u128>>::Output

Performs the >> operation.

impl<'_> Shr<&'_ u32> for i32

type Output = <i32 as Shr<u32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u32) -> <i32 as Shr<u32>>::Output

Performs the >> operation.

impl<'_> Shr<&'_ isize> for i32

type Output = <i32 as Shr<isize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &isize) -> <i32 as Shr<isize>>::Output

Performs the >> operation.

impl<'_, '_> Shr<&'_ u32> for &'_ i32

type Output = <i32 as Shr<u32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u32) -> <i32 as Shr<u32>>::Output

Performs the >> operation.

impl<'_> Shr<&'_ i64> for i32

type Output = <i32 as Shr<i64>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i64) -> <i32 as Shr<i64>>::Output

Performs the >> operation.

impl<'a> Shr<isize> for &'a i32

type Output = <i32 as Shr<isize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: isize) -> <i32 as Shr<isize>>::Output

Performs the >> operation.

impl<'_, '_> Shr<&'_ u8> for &'_ i32

type Output = <i32 as Shr<u8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u8) -> <i32 as Shr<u8>>::Output

Performs the >> operation.

impl<'_> Shr<&'_ u64> for i32

type Output = <i32 as Shr<u64>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u64) -> <i32 as Shr<u64>>::Output

Performs the >> operation.

impl<'_, '_> Shr<&'_ i16> for &'_ i32

type Output = <i32 as Shr<i16>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i16) -> <i32 as Shr<i16>>::Output

Performs the >> operation.

impl Shr<i32> for i32

type Output = i32

The resulting type after applying the >> operator.

fn shr(self, other: i32) -> i32

Performs the >> operation.

impl Shr<i128> for i32

type Output = i32

The resulting type after applying the >> operator.

fn shr(self, other: i128) -> i32

Performs the >> operation.

impl<'_, '_> Shr<&'_ u64> for &'_ i32

type Output = <i32 as Shr<u64>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u64) -> <i32 as Shr<u64>>::Output

Performs the >> operation.

impl Shr<usize> for i32

type Output = i32

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> i32

Performs the >> operation.

impl<'a> Shr<i8> for &'a i32

type Output = <i32 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i8) -> <i32 as Shr<i8>>::Output

Performs the >> operation.

impl<'_> Shr<&'_ i128> for i32

type Output = <i32 as Shr<i128>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i128) -> <i32 as Shr<i128>>::Output

Performs the >> operation.

impl Shr<i64> for i32

type Output = i32

The resulting type after applying the >> operator.

fn shr(self, other: i64) -> i32

Performs the >> operation.

impl Shr<isize> for i32

type Output = i32

The resulting type after applying the >> operator.

fn shr(self, other: isize) -> i32

Performs the >> operation.

impl Shr<u64> for i32

type Output = i32

The resulting type after applying the >> operator.

fn shr(self, other: u64) -> i32

Performs the >> operation.

impl<'_> Shr<&'_ i16> for i32

type Output = <i32 as Shr<i16>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i16) -> <i32 as Shr<i16>>::Output

Performs the >> operation.

impl Shr<u32> for i32

type Output = i32

The resulting type after applying the >> operator.

fn shr(self, other: u32) -> i32

Performs the >> operation.

impl<'_> Shr<&'_ i8> for i32

type Output = <i32 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i8) -> <i32 as Shr<i8>>::Output

Performs the >> operation.

impl<'_, '_> Shr<&'_ i128> for &'_ i32

type Output = <i32 as Shr<i128>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i128) -> <i32 as Shr<i128>>::Output

Performs the >> operation.

impl<'_, '_> Shr<&'_ usize> for &'_ i32

type Output = <i32 as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <i32 as Shr<usize>>::Output

Performs the >> operation.

impl<'_> Shr<&'_ usize> for i32

type Output = <i32 as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <i32 as Shr<usize>>::Output

Performs the >> operation.

impl<'_> Shr<&'_ i32> for i32

type Output = <i32 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i32) -> <i32 as Shr<i32>>::Output

Performs the >> operation.

impl<'a> Shr<i128> for &'a i32

type Output = <i32 as Shr<i128>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i128) -> <i32 as Shr<i128>>::Output

Performs the >> operation.

impl<'a> Shr<u8> for &'a i32

type Output = <i32 as Shr<u8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: u8) -> <i32 as Shr<u8>>::Output

Performs the >> operation.

impl<'_, '_> Shr<&'_ i8> for &'_ i32

type Output = <i32 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i8) -> <i32 as Shr<i8>>::Output

Performs the >> operation.

impl<'_, '_> Shr<&'_ isize> for &'_ i32

type Output = <i32 as Shr<isize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &isize) -> <i32 as Shr<isize>>::Output

Performs the >> operation.

impl<'a> Shr<u32> for &'a i32

type Output = <i32 as Shr<u32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: u32) -> <i32 as Shr<u32>>::Output

Performs the >> operation.

impl<'_, '_> Shr<&'_ u16> for &'_ i32

type Output = <i32 as Shr<u16>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u16) -> <i32 as Shr<u16>>::Output

Performs the >> operation.

impl<'a> Shr<u64> for &'a i32

type Output = <i32 as Shr<u64>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: u64) -> <i32 as Shr<u64>>::Output

Performs the >> operation.

impl<'a> Shr<u128> for &'a i32

type Output = <i32 as Shr<u128>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: u128) -> <i32 as Shr<u128>>::Output

Performs the >> operation.

impl Shr<u16> for i32

type Output = i32

The resulting type after applying the >> operator.

fn shr(self, other: u16) -> i32

Performs the >> operation.

impl<'_> Shr<&'_ u16> for i32

type Output = <i32 as Shr<u16>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u16) -> <i32 as Shr<u16>>::Output

Performs the >> operation.

impl<'a> Shr<i32> for &'a i32

type Output = <i32 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i32) -> <i32 as Shr<i32>>::Output

Performs the >> operation.

impl<'a> Shr<i16> for &'a i32

type Output = <i32 as Shr<i16>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i16) -> <i32 as Shr<i16>>::Output

Performs the >> operation.

impl<'_, '_> Shr<&'_ i64> for &'_ i32

type Output = <i32 as Shr<i64>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i64) -> <i32 as Shr<i64>>::Output

Performs the >> operation.

impl Shr<u8> for i32

type Output = i32

The resulting type after applying the >> operator.

fn shr(self, other: u8) -> i32

Performs the >> operation.

impl<'a> Shr<u16> for &'a i32

type Output = <i32 as Shr<u16>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: u16) -> <i32 as Shr<u16>>::Output

Performs the >> operation.

impl Shr<i16> for i32

type Output = i32

The resulting type after applying the >> operator.

fn shr(self, other: i16) -> i32

Performs the >> operation.

impl<'_> Shr<&'_ u128> for i32

type Output = <i32 as Shr<u128>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u128) -> <i32 as Shr<u128>>::Output

Performs the >> operation.

impl<'a> Shr<i64> for &'a i32

type Output = <i32 as Shr<i64>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i64) -> <i32 as Shr<i64>>::Output

Performs the >> operation.

impl BitAndAssign<i32> for i32

fn bitand_assign(&mut self, other: i32)

Performs the &= operation.

impl<'_> BitAndAssign<&'_ i32> for i32

fn bitand_assign(&mut self, other: &i32)

Performs the &= operation.

impl Shl<i128> for i32

type Output = i32

The resulting type after applying the << operator.

fn shl(self, other: i128) -> i32

Performs the << operation.

impl Shl<i64> for i32

type Output = i32

The resulting type after applying the << operator.

fn shl(self, other: i64) -> i32

Performs the << operation.

impl<'_> Shl<&'_ isize> for i32

type Output = <i32 as Shl<isize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &isize) -> <i32 as Shl<isize>>::Output

Performs the << operation.

impl<'_, '_> Shl<&'_ u8> for &'_ i32

type Output = <i32 as Shl<u8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u8) -> <i32 as Shl<u8>>::Output

Performs the << operation.

impl Shl<u32> for i32

type Output = i32

The resulting type after applying the << operator.

fn shl(self, other: u32) -> i32

Performs the << operation.

impl Shl<usize> for i32

type Output = i32

The resulting type after applying the << operator.

fn shl(self, other: usize) -> i32

Performs the << operation.

impl<'a> Shl<i8> for &'a i32

type Output = <i32 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i8) -> <i32 as Shl<i8>>::Output

Performs the << operation.

impl<'_, '_> Shl<&'_ i16> for &'_ i32

type Output = <i32 as Shl<i16>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i16) -> <i32 as Shl<i16>>::Output

Performs the << operation.

impl<'a> Shl<u64> for &'a i32

type Output = <i32 as Shl<u64>>::Output

The resulting type after applying the << operator.

fn shl(self, other: u64) -> <i32 as Shl<u64>>::Output

Performs the << operation.

impl<'a> Shl<i128> for &'a i32

type Output = <i32 as Shl<i128>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i128) -> <i32 as Shl<i128>>::Output

Performs the << operation.

impl Shl<i16> for i32

type Output = i32

The resulting type after applying the << operator.

fn shl(self, other: i16) -> i32

Performs the << operation.

impl<'a> Shl<isize> for &'a i32

type Output = <i32 as Shl<isize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: isize) -> <i32 as Shl<isize>>::Output

Performs the << operation.

impl<'_, '_> Shl<&'_ u32> for &'_ i32

type Output = <i32 as Shl<u32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u32) -> <i32 as Shl<u32>>::Output

Performs the << operation.

impl Shl<i8> for i32

type Output = i32

The resulting type after applying the << operator.

fn shl(self, other: i8) -> i32

Performs the << operation.

impl<'a> Shl<i64> for &'a i32

type Output = <i32 as Shl<i64>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i64) -> <i32 as Shl<i64>>::Output

Performs the << operation.

impl<'_, '_> Shl<&'_ i128> for &'_ i32

type Output = <i32 as Shl<i128>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i128) -> <i32 as Shl<i128>>::Output

Performs the << operation.

impl<'_, '_> Shl<&'_ usize> for &'_ i32

type Output = <i32 as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <i32 as Shl<usize>>::Output

Performs the << operation.

impl<'a> Shl<u32> for &'a i32

type Output = <i32 as Shl<u32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: u32) -> <i32 as Shl<u32>>::Output

Performs the << operation.

impl<'_> Shl<&'_ i128> for i32

type Output = <i32 as Shl<i128>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i128) -> <i32 as Shl<i128>>::Output

Performs the << operation.

impl Shl<i32> for i32

type Output = i32

The resulting type after applying the << operator.

fn shl(self, other: i32) -> i32

Performs the << operation.

impl<'_, '_> Shl<&'_ u64> for &'_ i32

type Output = <i32 as Shl<u64>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u64) -> <i32 as Shl<u64>>::Output

Performs the << operation.

impl Shl<u64> for i32

type Output = i32

The resulting type after applying the << operator.

fn shl(self, other: u64) -> i32

Performs the << operation.

impl<'_, '_> Shl<&'_ i64> for &'_ i32

type Output = <i32 as Shl<i64>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i64) -> <i32 as Shl<i64>>::Output

Performs the << operation.

impl<'_> Shl<&'_ i32> for i32

type Output = <i32 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i32) -> <i32 as Shl<i32>>::Output

Performs the << operation.

impl<'a> Shl<i32> for &'a i32

type Output = <i32 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i32) -> <i32 as Shl<i32>>::Output

Performs the << operation.

impl<'_> Shl<&'_ u16> for i32

type Output = <i32 as Shl<u16>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u16) -> <i32 as Shl<u16>>::Output

Performs the << operation.

impl<'a> Shl<usize> for &'a i32

type Output = <i32 as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: usize) -> <i32 as Shl<usize>>::Output

Performs the << operation.

impl Shl<isize> for i32

type Output = i32

The resulting type after applying the << operator.

fn shl(self, other: isize) -> i32

Performs the << operation.

impl Shl<u8> for i32

type Output = i32

The resulting type after applying the << operator.

fn shl(self, other: u8) -> i32

Performs the << operation.

impl<'_> Shl<&'_ i64> for i32

type Output = <i32 as Shl<i64>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i64) -> <i32 as Shl<i64>>::Output

Performs the << operation.

impl<'_, '_> Shl<&'_ i8> for &'_ i32

type Output = <i32 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i8) -> <i32 as Shl<i8>>::Output

Performs the << operation.

impl<'_, '_> Shl<&'_ u128> for &'_ i32

type Output = <i32 as Shl<u128>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u128) -> <i32 as Shl<u128>>::Output

Performs the << operation.

impl<'a> Shl<u16> for &'a i32

type Output = <i32 as Shl<u16>>::Output

The resulting type after applying the << operator.

fn shl(self, other: u16) -> <i32 as Shl<u16>>::Output

Performs the << operation.

impl<'_, '_> Shl<&'_ u16> for &'_ i32

type Output = <i32 as Shl<u16>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u16) -> <i32 as Shl<u16>>::Output

Performs the << operation.

impl Shl<u16> for i32

type Output = i32

The resulting type after applying the << operator.

fn shl(self, other: u16) -> i32

Performs the << operation.

impl<'_> Shl<&'_ usize> for i32

type Output = <i32 as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <i32 as Shl<usize>>::Output

Performs the << operation.

impl<'_, '_> Shl<&'_ i32> for &'_ i32

type Output = <i32 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i32) -> <i32 as Shl<i32>>::Output

Performs the << operation.

impl<'a> Shl<i16> for &'a i32

type Output = <i32 as Shl<i16>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i16) -> <i32 as Shl<i16>>::Output

Performs the << operation.

impl<'_> Shl<&'_ i8> for i32

type Output = <i32 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i8) -> <i32 as Shl<i8>>::Output

Performs the << operation.

impl<'a> Shl<u8> for &'a i32

type Output = <i32 as Shl<u8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: u8) -> <i32 as Shl<u8>>::Output

Performs the << operation.

impl<'_> Shl<&'_ i16> for i32

type Output = <i32 as Shl<i16>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i16) -> <i32 as Shl<i16>>::Output

Performs the << operation.

impl Shl<u128> for i32

type Output = i32

The resulting type after applying the << operator.

fn shl(self, other: u128) -> i32

Performs the << operation.

impl<'_> Shl<&'_ u64> for i32

type Output = <i32 as Shl<u64>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u64) -> <i32 as Shl<u64>>::Output

Performs the << operation.

impl<'_, '_> Shl<&'_ isize> for &'_ i32

type Output = <i32 as Shl<isize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &isize) -> <i32 as Shl<isize>>::Output

Performs the << operation.

impl<'_> Shl<&'_ u32> for i32

type Output = <i32 as Shl<u32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u32) -> <i32 as Shl<u32>>::Output

Performs the << operation.

impl<'_> Shl<&'_ u128> for i32

type Output = <i32 as Shl<u128>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u128) -> <i32 as Shl<u128>>::Output

Performs the << operation.

impl<'a> Shl<u128> for &'a i32

type Output = <i32 as Shl<u128>>::Output

The resulting type after applying the << operator.

fn shl(self, other: u128) -> <i32 as Shl<u128>>::Output

Performs the << operation.

impl<'_> Shl<&'_ u8> for i32

type Output = <i32 as Shl<u8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u8) -> <i32 as Shl<u8>>::Output

Performs the << operation.

impl<'_> Add<&'_ i32> for i32

type Output = <i32 as Add<i32>>::Output

The resulting type after applying the + operator.

fn add(self, other: &i32) -> <i32 as Add<i32>>::Output

Performs the + operation.

impl<'_, '_> Add<&'_ i32> for &'_ i32

type Output = <i32 as Add<i32>>::Output

The resulting type after applying the + operator.

fn add(self, other: &i32) -> <i32 as Add<i32>>::Output

Performs the + operation.

impl Add<i32> for i32

type Output = i32

The resulting type after applying the + operator.

fn add(self, other: i32) -> i32

Performs the + operation.

impl<'a> Add<i32> for &'a i32

type Output = <i32 as Add<i32>>::Output

The resulting type after applying the + operator.

fn add(self, other: i32) -> <i32 as Add<i32>>::Output

Performs the + operation.

impl Binary for i32

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl RemAssign<i32> for i32

fn rem_assign(&mut self, other: i32)

Performs the %= operation.

impl<'_> RemAssign<&'_ i32> for i32

fn rem_assign(&mut self, other: &i32)

Performs the %= operation.

impl<'_> SubAssign<&'_ i32> for i32

fn sub_assign(&mut self, other: &i32)

Performs the -= operation.

impl SubAssign<i32> for i32

fn sub_assign(&mut self, other: i32)

Performs the -= operation.

impl Debug for i32

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl Copy for i32

impl Ord for i32

fn cmp(&self, other: &i32) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval.

impl<'a> BitXor<i32> for &'a i32

type Output = <i32 as BitXor<i32>>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: i32) -> <i32 as BitXor<i32>>::Output

Performs the ^ operation.

impl BitXor<i32> for i32

type Output = i32

The resulting type after applying the ^ operator.

fn bitxor(self, other: i32) -> i32

Performs the ^ operation.

impl<'_, '_> BitXor<&'_ i32> for &'_ i32

type Output = <i32 as BitXor<i32>>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &i32) -> <i32 as BitXor<i32>>::Output

Performs the ^ operation.

impl<'_> BitXor<&'_ i32> for i32

type Output = <i32 as BitXor<i32>>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &i32) -> <i32 as BitXor<i32>>::Output

Performs the ^ operation.

impl PartialEq<i32> for i32

fn eq(&self, other: &i32) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &i32) -> bool

This method tests for !=.

impl BitXorAssign<i32> for i32

fn bitxor_assign(&mut self, other: i32)

Performs the ^= operation.

impl<'_> BitXorAssign<&'_ i32> for i32

fn bitxor_assign(&mut self, other: &i32)

Performs the ^= operation.

impl LowerHex for i32

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl Display for i32

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl<'_> DivAssign<&'_ i32> for i32

fn div_assign(&mut self, other: &i32)

Performs the /= operation.

impl DivAssign<i32> for i32

fn div_assign(&mut self, other: i32)

Performs the /= operation.

impl<'_, '_> BitOr<&'_ i32> for &'_ i32

type Output = <i32 as BitOr<i32>>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &i32) -> <i32 as BitOr<i32>>::Output

Performs the | operation.

impl<'a> BitOr<i32> for &'a i32

type Output = <i32 as BitOr<i32>>::Output

The resulting type after applying the | operator.

fn bitor(self, other: i32) -> <i32 as BitOr<i32>>::Output

Performs the | operation.

impl BitOr<i32> for i32

type Output = i32

The resulting type after applying the | operator.

fn bitor(self, rhs: i32) -> i32

Performs the | operation.

impl<'_> BitOr<&'_ i32> for i32

type Output = <i32 as BitOr<i32>>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &i32) -> <i32 as BitOr<i32>>::Output

Performs the | operation.

impl AddAssign<i32> for i32

fn add_assign(&mut self, other: i32)

Performs the += operation.

impl<'_> AddAssign<&'_ i32> for i32

fn add_assign(&mut self, other: &i32)

Performs the += operation.

impl<'_> Rem<&'_ i32> for i32

type Output = <i32 as Rem<i32>>::Output

The resulting type after applying the % operator.

fn rem(self, other: &i32) -> <i32 as Rem<i32>>::Output

Performs the % operation.

impl<'a> Rem<i32> for &'a i32

type Output = <i32 as Rem<i32>>::Output

The resulting type after applying the % operator.

fn rem(self, other: i32) -> <i32 as Rem<i32>>::Output

Performs the % operation.

impl<'_, '_> Rem<&'_ i32> for &'_ i32

type Output = <i32 as Rem<i32>>::Output

The resulting type after applying the % operator.

fn rem(self, other: &i32) -> <i32 as Rem<i32>>::Output

Performs the % operation.

impl Rem<i32> for i32

This operation satisfies n % d == n - (n / d) * d. The result has the same sign as the left operand.

type Output = i32

The resulting type after applying the % operator.

fn rem(self, other: i32) -> i32

Performs the % operation.

impl FromStr for i32

type Err = ParseIntError

The associated error which can be returned from parsing.

fn from_str(src: &str) -> Result<i32, ParseIntError>

Parses a string s to return a value of this type.

impl<'_> Div<&'_ i32> for i32

type Output = <i32 as Div<i32>>::Output

The resulting type after applying the / operator.

fn div(self, other: &i32) -> <i32 as Div<i32>>::Output

Performs the / operation.

impl Div<i32> for i32

This operation rounds towards zero, truncating any fractional part of the exact result.

type Output = i32

The resulting type after applying the / operator.

fn div(self, other: i32) -> i32

Performs the / operation.

impl<'a> Div<i32> for &'a i32

type Output = <i32 as Div<i32>>::Output

The resulting type after applying the / operator.

fn div(self, other: i32) -> <i32 as Div<i32>>::Output

Performs the / operation.

impl<'_, '_> Div<&'_ i32> for &'_ i32

type Output = <i32 as Div<i32>>::Output

The resulting type after applying the / operator.

fn div(self, other: &i32) -> <i32 as Div<i32>>::Output

Performs the / operation.