1.0.0[−][src]Struct core::num::Wrapping
Provides intentionally-wrapped arithmetic on T.
Operations like + on u32 values is intended to never overflow,
and in some debug configurations overflow is detected and results
in a panic. While most arithmetic falls into this category, some
code explicitly expects and relies upon modular arithmetic (e.g.,
hashing).
Wrapping arithmetic can be achieved either through methods like
wrapping_add, or through the Wrapping<T> type, which says that
all standard arithmetic operations on the underlying value are
intended to have wrapping semantics.
The underlying value can be retrieved through the .0 index of the
Wrapping tuple.
Examples
use std::num::Wrapping; let zero = Wrapping(0u32); let one = Wrapping(1u32); assert_eq!(std::u32::MAX, (zero - one).0);Run
Methods
impl Wrapping<usize>[src]
pub const fn min_value() -> Self[src]
Returns the smallest value that can be represented by this integer type.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(<Wrapping<usize>>::min_value(), Wrapping(usize::min_value()));Run
pub const fn max_value() -> Self[src]
Returns the largest value that can be represented by this integer type.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(<Wrapping<usize>>::max_value(), Wrapping(usize::max_value()));Run
pub const fn count_ones(self) -> u32[src]
Returns the number of ones in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0b01001100usize); assert_eq!(n.count_ones(), 3);Run
pub const fn count_zeros(self) -> u32[src]
Returns the number of zeros in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(!0usize).count_zeros(), 0);Run
pub const fn trailing_zeros(self) -> u32[src]
Returns the number of trailing zeros in the binary representation
of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0b0101000usize); assert_eq!(n.trailing_zeros(), 3);Run
pub const fn rotate_left(self, n: u32) -> Self[src]
Shifts the bits to the left by a specified amount, n,
wrapping the truncated bits to the end of the resulting
integer.
Please note this isn't the same operation as the >> shifting
operator!
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF); let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99); assert_eq!(n.rotate_left(32), m);Run
pub const fn rotate_right(self, n: u32) -> Self[src]
Shifts the bits to the right by a specified amount, n,
wrapping the truncated bits to the beginning of the resulting
integer.
Please note this isn't the same operation as the << shifting
operator!
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF); let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322); assert_eq!(n.rotate_right(4), m);Run
pub const fn swap_bytes(self) -> Self[src]
Reverses the byte order of the integer.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i16> = Wrapping(0b0000000_01010101); assert_eq!(n, Wrapping(85)); let m = n.swap_bytes(); assert_eq!(m, Wrapping(0b01010101_00000000)); assert_eq!(m, Wrapping(21760));Run
#[must_use]
pub const fn reverse_bits(self) -> Self1.37.0[src]
Reverses the bit pattern of the integer.
Examples
Please note that this example is shared between integer types.
Which explains why i16 is used here.
Basic usage:
use std::num::Wrapping; let n = Wrapping(0b0000000_01010101i16); assert_eq!(n, Wrapping(85)); let m = n.reverse_bits(); assert_eq!(m.0 as u16, 0b10101010_00000000); assert_eq!(m, Wrapping(-22016));Run
pub const fn from_be(x: Self) -> Self[src]
Converts an integer from big endian to the target's endianness.
On big endian this is a no-op. On little endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Ausize); if cfg!(target_endian = "big") { assert_eq!(<Wrapping<usize>>::from_be(n), n) } else { assert_eq!(<Wrapping<usize>>::from_be(n), n.swap_bytes()) }Run
pub const fn from_le(x: Self) -> Self[src]
Converts an integer from little endian to the target's endianness.
On little endian this is a no-op. On big endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Ausize); if cfg!(target_endian = "little") { assert_eq!(<Wrapping<usize>>::from_le(n), n) } else { assert_eq!(<Wrapping<usize>>::from_le(n), n.swap_bytes()) }Run
pub const fn to_be(self) -> Self[src]
Converts self to big endian from the target's endianness.
On big endian this is a no-op. On little endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Ausize); if cfg!(target_endian = "big") { assert_eq!(n.to_be(), n) } else { assert_eq!(n.to_be(), n.swap_bytes()) }Run
pub const fn to_le(self) -> Self[src]
Converts self to little endian from the target's endianness.
On little endian this is a no-op. On big endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Ausize); if cfg!(target_endian = "little") { assert_eq!(n.to_le(), n) } else { assert_eq!(n.to_le(), n.swap_bytes()) }Run
pub fn pow(self, exp: u32) -> Self[src]
Raises self to the power of exp, using exponentiation by squaring.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(3usize).pow(4), Wrapping(81));Run
Results that are too large are wrapped:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13)); assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));Run
impl Wrapping<u8>[src]
pub const fn min_value() -> Self[src]
Returns the smallest value that can be represented by this integer type.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(<Wrapping<u8>>::min_value(), Wrapping(u8::min_value()));Run
pub const fn max_value() -> Self[src]
Returns the largest value that can be represented by this integer type.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(<Wrapping<u8>>::max_value(), Wrapping(u8::max_value()));Run
pub const fn count_ones(self) -> u32[src]
Returns the number of ones in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0b01001100u8); assert_eq!(n.count_ones(), 3);Run
pub const fn count_zeros(self) -> u32[src]
Returns the number of zeros in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(!0u8).count_zeros(), 0);Run
pub const fn trailing_zeros(self) -> u32[src]
Returns the number of trailing zeros in the binary representation
of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0b0101000u8); assert_eq!(n.trailing_zeros(), 3);Run
pub const fn rotate_left(self, n: u32) -> Self[src]
Shifts the bits to the left by a specified amount, n,
wrapping the truncated bits to the end of the resulting
integer.
Please note this isn't the same operation as the >> shifting
operator!
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF); let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99); assert_eq!(n.rotate_left(32), m);Run
pub const fn rotate_right(self, n: u32) -> Self[src]
Shifts the bits to the right by a specified amount, n,
wrapping the truncated bits to the beginning of the resulting
integer.
Please note this isn't the same operation as the << shifting
operator!
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF); let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322); assert_eq!(n.rotate_right(4), m);Run
pub const fn swap_bytes(self) -> Self[src]
Reverses the byte order of the integer.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i16> = Wrapping(0b0000000_01010101); assert_eq!(n, Wrapping(85)); let m = n.swap_bytes(); assert_eq!(m, Wrapping(0b01010101_00000000)); assert_eq!(m, Wrapping(21760));Run
#[must_use]
pub const fn reverse_bits(self) -> Self1.37.0[src]
Reverses the bit pattern of the integer.
Examples
Please note that this example is shared between integer types.
Which explains why i16 is used here.
Basic usage:
use std::num::Wrapping; let n = Wrapping(0b0000000_01010101i16); assert_eq!(n, Wrapping(85)); let m = n.reverse_bits(); assert_eq!(m.0 as u16, 0b10101010_00000000); assert_eq!(m, Wrapping(-22016));Run
pub const fn from_be(x: Self) -> Self[src]
Converts an integer from big endian to the target's endianness.
On big endian this is a no-op. On little endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Au8); if cfg!(target_endian = "big") { assert_eq!(<Wrapping<u8>>::from_be(n), n) } else { assert_eq!(<Wrapping<u8>>::from_be(n), n.swap_bytes()) }Run
pub const fn from_le(x: Self) -> Self[src]
Converts an integer from little endian to the target's endianness.
On little endian this is a no-op. On big endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Au8); if cfg!(target_endian = "little") { assert_eq!(<Wrapping<u8>>::from_le(n), n) } else { assert_eq!(<Wrapping<u8>>::from_le(n), n.swap_bytes()) }Run
pub const fn to_be(self) -> Self[src]
Converts self to big endian from the target's endianness.
On big endian this is a no-op. On little endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Au8); if cfg!(target_endian = "big") { assert_eq!(n.to_be(), n) } else { assert_eq!(n.to_be(), n.swap_bytes()) }Run
pub const fn to_le(self) -> Self[src]
Converts self to little endian from the target's endianness.
On little endian this is a no-op. On big endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Au8); if cfg!(target_endian = "little") { assert_eq!(n.to_le(), n) } else { assert_eq!(n.to_le(), n.swap_bytes()) }Run
pub fn pow(self, exp: u32) -> Self[src]
Raises self to the power of exp, using exponentiation by squaring.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(3u8).pow(4), Wrapping(81));Run
Results that are too large are wrapped:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13)); assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));Run
impl Wrapping<u16>[src]
pub const fn min_value() -> Self[src]
Returns the smallest value that can be represented by this integer type.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(<Wrapping<u16>>::min_value(), Wrapping(u16::min_value()));Run
pub const fn max_value() -> Self[src]
Returns the largest value that can be represented by this integer type.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(<Wrapping<u16>>::max_value(), Wrapping(u16::max_value()));Run
pub const fn count_ones(self) -> u32[src]
Returns the number of ones in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0b01001100u16); assert_eq!(n.count_ones(), 3);Run
pub const fn count_zeros(self) -> u32[src]
Returns the number of zeros in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(!0u16).count_zeros(), 0);Run
pub const fn trailing_zeros(self) -> u32[src]
Returns the number of trailing zeros in the binary representation
of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0b0101000u16); assert_eq!(n.trailing_zeros(), 3);Run
pub const fn rotate_left(self, n: u32) -> Self[src]
Shifts the bits to the left by a specified amount, n,
wrapping the truncated bits to the end of the resulting
integer.
Please note this isn't the same operation as the >> shifting
operator!
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF); let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99); assert_eq!(n.rotate_left(32), m);Run
pub const fn rotate_right(self, n: u32) -> Self[src]
Shifts the bits to the right by a specified amount, n,
wrapping the truncated bits to the beginning of the resulting
integer.
Please note this isn't the same operation as the << shifting
operator!
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF); let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322); assert_eq!(n.rotate_right(4), m);Run
pub const fn swap_bytes(self) -> Self[src]
Reverses the byte order of the integer.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i16> = Wrapping(0b0000000_01010101); assert_eq!(n, Wrapping(85)); let m = n.swap_bytes(); assert_eq!(m, Wrapping(0b01010101_00000000)); assert_eq!(m, Wrapping(21760));Run
#[must_use]
pub const fn reverse_bits(self) -> Self1.37.0[src]
Reverses the bit pattern of the integer.
Examples
Please note that this example is shared between integer types.
Which explains why i16 is used here.
Basic usage:
use std::num::Wrapping; let n = Wrapping(0b0000000_01010101i16); assert_eq!(n, Wrapping(85)); let m = n.reverse_bits(); assert_eq!(m.0 as u16, 0b10101010_00000000); assert_eq!(m, Wrapping(-22016));Run
pub const fn from_be(x: Self) -> Self[src]
Converts an integer from big endian to the target's endianness.
On big endian this is a no-op. On little endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Au16); if cfg!(target_endian = "big") { assert_eq!(<Wrapping<u16>>::from_be(n), n) } else { assert_eq!(<Wrapping<u16>>::from_be(n), n.swap_bytes()) }Run
pub const fn from_le(x: Self) -> Self[src]
Converts an integer from little endian to the target's endianness.
On little endian this is a no-op. On big endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Au16); if cfg!(target_endian = "little") { assert_eq!(<Wrapping<u16>>::from_le(n), n) } else { assert_eq!(<Wrapping<u16>>::from_le(n), n.swap_bytes()) }Run
pub const fn to_be(self) -> Self[src]
Converts self to big endian from the target's endianness.
On big endian this is a no-op. On little endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Au16); if cfg!(target_endian = "big") { assert_eq!(n.to_be(), n) } else { assert_eq!(n.to_be(), n.swap_bytes()) }Run
pub const fn to_le(self) -> Self[src]
Converts self to little endian from the target's endianness.
On little endian this is a no-op. On big endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Au16); if cfg!(target_endian = "little") { assert_eq!(n.to_le(), n) } else { assert_eq!(n.to_le(), n.swap_bytes()) }Run
pub fn pow(self, exp: u32) -> Self[src]
Raises self to the power of exp, using exponentiation by squaring.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(3u16).pow(4), Wrapping(81));Run
Results that are too large are wrapped:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13)); assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));Run
impl Wrapping<u32>[src]
pub const fn min_value() -> Self[src]
Returns the smallest value that can be represented by this integer type.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(<Wrapping<u32>>::min_value(), Wrapping(u32::min_value()));Run
pub const fn max_value() -> Self[src]
Returns the largest value that can be represented by this integer type.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(<Wrapping<u32>>::max_value(), Wrapping(u32::max_value()));Run
pub const fn count_ones(self) -> u32[src]
Returns the number of ones in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0b01001100u32); assert_eq!(n.count_ones(), 3);Run
pub const fn count_zeros(self) -> u32[src]
Returns the number of zeros in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(!0u32).count_zeros(), 0);Run
pub const fn trailing_zeros(self) -> u32[src]
Returns the number of trailing zeros in the binary representation
of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0b0101000u32); assert_eq!(n.trailing_zeros(), 3);Run
pub const fn rotate_left(self, n: u32) -> Self[src]
Shifts the bits to the left by a specified amount, n,
wrapping the truncated bits to the end of the resulting
integer.
Please note this isn't the same operation as the >> shifting
operator!
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF); let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99); assert_eq!(n.rotate_left(32), m);Run
pub const fn rotate_right(self, n: u32) -> Self[src]
Shifts the bits to the right by a specified amount, n,
wrapping the truncated bits to the beginning of the resulting
integer.
Please note this isn't the same operation as the << shifting
operator!
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF); let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322); assert_eq!(n.rotate_right(4), m);Run
pub const fn swap_bytes(self) -> Self[src]
Reverses the byte order of the integer.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i16> = Wrapping(0b0000000_01010101); assert_eq!(n, Wrapping(85)); let m = n.swap_bytes(); assert_eq!(m, Wrapping(0b01010101_00000000)); assert_eq!(m, Wrapping(21760));Run
#[must_use]
pub const fn reverse_bits(self) -> Self1.37.0[src]
Reverses the bit pattern of the integer.
Examples
Please note that this example is shared between integer types.
Which explains why i16 is used here.
Basic usage:
use std::num::Wrapping; let n = Wrapping(0b0000000_01010101i16); assert_eq!(n, Wrapping(85)); let m = n.reverse_bits(); assert_eq!(m.0 as u16, 0b10101010_00000000); assert_eq!(m, Wrapping(-22016));Run
pub const fn from_be(x: Self) -> Self[src]
Converts an integer from big endian to the target's endianness.
On big endian this is a no-op. On little endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Au32); if cfg!(target_endian = "big") { assert_eq!(<Wrapping<u32>>::from_be(n), n) } else { assert_eq!(<Wrapping<u32>>::from_be(n), n.swap_bytes()) }Run
pub const fn from_le(x: Self) -> Self[src]
Converts an integer from little endian to the target's endianness.
On little endian this is a no-op. On big endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Au32); if cfg!(target_endian = "little") { assert_eq!(<Wrapping<u32>>::from_le(n), n) } else { assert_eq!(<Wrapping<u32>>::from_le(n), n.swap_bytes()) }Run
pub const fn to_be(self) -> Self[src]
Converts self to big endian from the target's endianness.
On big endian this is a no-op. On little endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Au32); if cfg!(target_endian = "big") { assert_eq!(n.to_be(), n) } else { assert_eq!(n.to_be(), n.swap_bytes()) }Run
pub const fn to_le(self) -> Self[src]
Converts self to little endian from the target's endianness.
On little endian this is a no-op. On big endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Au32); if cfg!(target_endian = "little") { assert_eq!(n.to_le(), n) } else { assert_eq!(n.to_le(), n.swap_bytes()) }Run
pub fn pow(self, exp: u32) -> Self[src]
Raises self to the power of exp, using exponentiation by squaring.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(3u32).pow(4), Wrapping(81));Run
Results that are too large are wrapped:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13)); assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));Run
impl Wrapping<u64>[src]
pub const fn min_value() -> Self[src]
Returns the smallest value that can be represented by this integer type.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(<Wrapping<u64>>::min_value(), Wrapping(u64::min_value()));Run
pub const fn max_value() -> Self[src]
Returns the largest value that can be represented by this integer type.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(<Wrapping<u64>>::max_value(), Wrapping(u64::max_value()));Run
pub const fn count_ones(self) -> u32[src]
Returns the number of ones in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0b01001100u64); assert_eq!(n.count_ones(), 3);Run
pub const fn count_zeros(self) -> u32[src]
Returns the number of zeros in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(!0u64).count_zeros(), 0);Run
pub const fn trailing_zeros(self) -> u32[src]
Returns the number of trailing zeros in the binary representation
of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0b0101000u64); assert_eq!(n.trailing_zeros(), 3);Run
pub const fn rotate_left(self, n: u32) -> Self[src]
Shifts the bits to the left by a specified amount, n,
wrapping the truncated bits to the end of the resulting
integer.
Please note this isn't the same operation as the >> shifting
operator!
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF); let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99); assert_eq!(n.rotate_left(32), m);Run
pub const fn rotate_right(self, n: u32) -> Self[src]
Shifts the bits to the right by a specified amount, n,
wrapping the truncated bits to the beginning of the resulting
integer.
Please note this isn't the same operation as the << shifting
operator!
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF); let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322); assert_eq!(n.rotate_right(4), m);Run
pub const fn swap_bytes(self) -> Self[src]
Reverses the byte order of the integer.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i16> = Wrapping(0b0000000_01010101); assert_eq!(n, Wrapping(85)); let m = n.swap_bytes(); assert_eq!(m, Wrapping(0b01010101_00000000)); assert_eq!(m, Wrapping(21760));Run
#[must_use]
pub const fn reverse_bits(self) -> Self1.37.0[src]
Reverses the bit pattern of the integer.
Examples
Please note that this example is shared between integer types.
Which explains why i16 is used here.
Basic usage:
use std::num::Wrapping; let n = Wrapping(0b0000000_01010101i16); assert_eq!(n, Wrapping(85)); let m = n.reverse_bits(); assert_eq!(m.0 as u16, 0b10101010_00000000); assert_eq!(m, Wrapping(-22016));Run
pub const fn from_be(x: Self) -> Self[src]
Converts an integer from big endian to the target's endianness.
On big endian this is a no-op. On little endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Au64); if cfg!(target_endian = "big") { assert_eq!(<Wrapping<u64>>::from_be(n), n) } else { assert_eq!(<Wrapping<u64>>::from_be(n), n.swap_bytes()) }Run
pub const fn from_le(x: Self) -> Self[src]
Converts an integer from little endian to the target's endianness.
On little endian this is a no-op. On big endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Au64); if cfg!(target_endian = "little") { assert_eq!(<Wrapping<u64>>::from_le(n), n) } else { assert_eq!(<Wrapping<u64>>::from_le(n), n.swap_bytes()) }Run
pub const fn to_be(self) -> Self[src]
Converts self to big endian from the target's endianness.
On big endian this is a no-op. On little endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Au64); if cfg!(target_endian = "big") { assert_eq!(n.to_be(), n) } else { assert_eq!(n.to_be(), n.swap_bytes()) }Run
pub const fn to_le(self) -> Self[src]
Converts self to little endian from the target's endianness.
On little endian this is a no-op. On big endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Au64); if cfg!(target_endian = "little") { assert_eq!(n.to_le(), n) } else { assert_eq!(n.to_le(), n.swap_bytes()) }Run
pub fn pow(self, exp: u32) -> Self[src]
Raises self to the power of exp, using exponentiation by squaring.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(3u64).pow(4), Wrapping(81));Run
Results that are too large are wrapped:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13)); assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));Run
impl Wrapping<u128>[src]
pub const fn min_value() -> Self[src]
Returns the smallest value that can be represented by this integer type.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(<Wrapping<u128>>::min_value(), Wrapping(u128::min_value()));Run
pub const fn max_value() -> Self[src]
Returns the largest value that can be represented by this integer type.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(<Wrapping<u128>>::max_value(), Wrapping(u128::max_value()));Run
pub const fn count_ones(self) -> u32[src]
Returns the number of ones in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0b01001100u128); assert_eq!(n.count_ones(), 3);Run
pub const fn count_zeros(self) -> u32[src]
Returns the number of zeros in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(!0u128).count_zeros(), 0);Run
pub const fn trailing_zeros(self) -> u32[src]
Returns the number of trailing zeros in the binary representation
of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0b0101000u128); assert_eq!(n.trailing_zeros(), 3);Run
pub const fn rotate_left(self, n: u32) -> Self[src]
Shifts the bits to the left by a specified amount, n,
wrapping the truncated bits to the end of the resulting
integer.
Please note this isn't the same operation as the >> shifting
operator!
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF); let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99); assert_eq!(n.rotate_left(32), m);Run
pub const fn rotate_right(self, n: u32) -> Self[src]
Shifts the bits to the right by a specified amount, n,
wrapping the truncated bits to the beginning of the resulting
integer.
Please note this isn't the same operation as the << shifting
operator!
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF); let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322); assert_eq!(n.rotate_right(4), m);Run
pub const fn swap_bytes(self) -> Self[src]
Reverses the byte order of the integer.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i16> = Wrapping(0b0000000_01010101); assert_eq!(n, Wrapping(85)); let m = n.swap_bytes(); assert_eq!(m, Wrapping(0b01010101_00000000)); assert_eq!(m, Wrapping(21760));Run
#[must_use]
pub const fn reverse_bits(self) -> Self1.37.0[src]
Reverses the bit pattern of the integer.
Examples
Please note that this example is shared between integer types.
Which explains why i16 is used here.
Basic usage:
use std::num::Wrapping; let n = Wrapping(0b0000000_01010101i16); assert_eq!(n, Wrapping(85)); let m = n.reverse_bits(); assert_eq!(m.0 as u16, 0b10101010_00000000); assert_eq!(m, Wrapping(-22016));Run
pub const fn from_be(x: Self) -> Self[src]
Converts an integer from big endian to the target's endianness.
On big endian this is a no-op. On little endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Au128); if cfg!(target_endian = "big") { assert_eq!(<Wrapping<u128>>::from_be(n), n) } else { assert_eq!(<Wrapping<u128>>::from_be(n), n.swap_bytes()) }Run
pub const fn from_le(x: Self) -> Self[src]
Converts an integer from little endian to the target's endianness.
On little endian this is a no-op. On big endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Au128); if cfg!(target_endian = "little") { assert_eq!(<Wrapping<u128>>::from_le(n), n) } else { assert_eq!(<Wrapping<u128>>::from_le(n), n.swap_bytes()) }Run
pub const fn to_be(self) -> Self[src]
Converts self to big endian from the target's endianness.
On big endian this is a no-op. On little endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Au128); if cfg!(target_endian = "big") { assert_eq!(n.to_be(), n) } else { assert_eq!(n.to_be(), n.swap_bytes()) }Run
pub const fn to_le(self) -> Self[src]
Converts self to little endian from the target's endianness.
On little endian this is a no-op. On big endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Au128); if cfg!(target_endian = "little") { assert_eq!(n.to_le(), n) } else { assert_eq!(n.to_le(), n.swap_bytes()) }Run
pub fn pow(self, exp: u32) -> Self[src]
Raises self to the power of exp, using exponentiation by squaring.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(3u128).pow(4), Wrapping(81));Run
Results that are too large are wrapped:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13)); assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));Run
impl Wrapping<isize>[src]
pub const fn min_value() -> Self[src]
Returns the smallest value that can be represented by this integer type.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(<Wrapping<isize>>::min_value(), Wrapping(isize::min_value()));Run
pub const fn max_value() -> Self[src]
Returns the largest value that can be represented by this integer type.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(<Wrapping<isize>>::max_value(), Wrapping(isize::max_value()));Run
pub const fn count_ones(self) -> u32[src]
Returns the number of ones in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0b01001100isize); assert_eq!(n.count_ones(), 3);Run
pub const fn count_zeros(self) -> u32[src]
Returns the number of zeros in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(!0isize).count_zeros(), 0);Run
pub const fn trailing_zeros(self) -> u32[src]
Returns the number of trailing zeros in the binary representation
of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0b0101000isize); assert_eq!(n.trailing_zeros(), 3);Run
pub const fn rotate_left(self, n: u32) -> Self[src]
Shifts the bits to the left by a specified amount, n,
wrapping the truncated bits to the end of the resulting
integer.
Please note this isn't the same operation as the >> shifting
operator!
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF); let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99); assert_eq!(n.rotate_left(32), m);Run
pub const fn rotate_right(self, n: u32) -> Self[src]
Shifts the bits to the right by a specified amount, n,
wrapping the truncated bits to the beginning of the resulting
integer.
Please note this isn't the same operation as the << shifting
operator!
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF); let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322); assert_eq!(n.rotate_right(4), m);Run
pub const fn swap_bytes(self) -> Self[src]
Reverses the byte order of the integer.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i16> = Wrapping(0b0000000_01010101); assert_eq!(n, Wrapping(85)); let m = n.swap_bytes(); assert_eq!(m, Wrapping(0b01010101_00000000)); assert_eq!(m, Wrapping(21760));Run
#[must_use]
pub const fn reverse_bits(self) -> Self1.37.0[src]
Reverses the bit pattern of the integer.
Examples
Please note that this example is shared between integer types.
Which explains why i16 is used here.
Basic usage:
use std::num::Wrapping; let n = Wrapping(0b0000000_01010101i16); assert_eq!(n, Wrapping(85)); let m = n.reverse_bits(); assert_eq!(m.0 as u16, 0b10101010_00000000); assert_eq!(m, Wrapping(-22016));Run
pub const fn from_be(x: Self) -> Self[src]
Converts an integer from big endian to the target's endianness.
On big endian this is a no-op. On little endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Aisize); if cfg!(target_endian = "big") { assert_eq!(<Wrapping<isize>>::from_be(n), n) } else { assert_eq!(<Wrapping<isize>>::from_be(n), n.swap_bytes()) }Run
pub const fn from_le(x: Self) -> Self[src]
Converts an integer from little endian to the target's endianness.
On little endian this is a no-op. On big endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Aisize); if cfg!(target_endian = "little") { assert_eq!(<Wrapping<isize>>::from_le(n), n) } else { assert_eq!(<Wrapping<isize>>::from_le(n), n.swap_bytes()) }Run
pub const fn to_be(self) -> Self[src]
Converts self to big endian from the target's endianness.
On big endian this is a no-op. On little endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Aisize); if cfg!(target_endian = "big") { assert_eq!(n.to_be(), n) } else { assert_eq!(n.to_be(), n.swap_bytes()) }Run
pub const fn to_le(self) -> Self[src]
Converts self to little endian from the target's endianness.
On little endian this is a no-op. On big endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Aisize); if cfg!(target_endian = "little") { assert_eq!(n.to_le(), n) } else { assert_eq!(n.to_le(), n.swap_bytes()) }Run
pub fn pow(self, exp: u32) -> Self[src]
Raises self to the power of exp, using exponentiation by squaring.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(3isize).pow(4), Wrapping(81));Run
Results that are too large are wrapped:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13)); assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));Run
impl Wrapping<i8>[src]
pub const fn min_value() -> Self[src]
Returns the smallest value that can be represented by this integer type.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(<Wrapping<i8>>::min_value(), Wrapping(i8::min_value()));Run
pub const fn max_value() -> Self[src]
Returns the largest value that can be represented by this integer type.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(<Wrapping<i8>>::max_value(), Wrapping(i8::max_value()));Run
pub const fn count_ones(self) -> u32[src]
Returns the number of ones in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0b01001100i8); assert_eq!(n.count_ones(), 3);Run
pub const fn count_zeros(self) -> u32[src]
Returns the number of zeros in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(!0i8).count_zeros(), 0);Run
pub const fn trailing_zeros(self) -> u32[src]
Returns the number of trailing zeros in the binary representation
of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0b0101000i8); assert_eq!(n.trailing_zeros(), 3);Run
pub const fn rotate_left(self, n: u32) -> Self[src]
Shifts the bits to the left by a specified amount, n,
wrapping the truncated bits to the end of the resulting
integer.
Please note this isn't the same operation as the >> shifting
operator!
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF); let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99); assert_eq!(n.rotate_left(32), m);Run
pub const fn rotate_right(self, n: u32) -> Self[src]
Shifts the bits to the right by a specified amount, n,
wrapping the truncated bits to the beginning of the resulting
integer.
Please note this isn't the same operation as the << shifting
operator!
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF); let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322); assert_eq!(n.rotate_right(4), m);Run
pub const fn swap_bytes(self) -> Self[src]
Reverses the byte order of the integer.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i16> = Wrapping(0b0000000_01010101); assert_eq!(n, Wrapping(85)); let m = n.swap_bytes(); assert_eq!(m, Wrapping(0b01010101_00000000)); assert_eq!(m, Wrapping(21760));Run
#[must_use]
pub const fn reverse_bits(self) -> Self1.37.0[src]
Reverses the bit pattern of the integer.
Examples
Please note that this example is shared between integer types.
Which explains why i16 is used here.
Basic usage:
use std::num::Wrapping; let n = Wrapping(0b0000000_01010101i16); assert_eq!(n, Wrapping(85)); let m = n.reverse_bits(); assert_eq!(m.0 as u16, 0b10101010_00000000); assert_eq!(m, Wrapping(-22016));Run
pub const fn from_be(x: Self) -> Self[src]
Converts an integer from big endian to the target's endianness.
On big endian this is a no-op. On little endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Ai8); if cfg!(target_endian = "big") { assert_eq!(<Wrapping<i8>>::from_be(n), n) } else { assert_eq!(<Wrapping<i8>>::from_be(n), n.swap_bytes()) }Run
pub const fn from_le(x: Self) -> Self[src]
Converts an integer from little endian to the target's endianness.
On little endian this is a no-op. On big endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Ai8); if cfg!(target_endian = "little") { assert_eq!(<Wrapping<i8>>::from_le(n), n) } else { assert_eq!(<Wrapping<i8>>::from_le(n), n.swap_bytes()) }Run
pub const fn to_be(self) -> Self[src]
Converts self to big endian from the target's endianness.
On big endian this is a no-op. On little endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Ai8); if cfg!(target_endian = "big") { assert_eq!(n.to_be(), n) } else { assert_eq!(n.to_be(), n.swap_bytes()) }Run
pub const fn to_le(self) -> Self[src]
Converts self to little endian from the target's endianness.
On little endian this is a no-op. On big endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Ai8); if cfg!(target_endian = "little") { assert_eq!(n.to_le(), n) } else { assert_eq!(n.to_le(), n.swap_bytes()) }Run
pub fn pow(self, exp: u32) -> Self[src]
Raises self to the power of exp, using exponentiation by squaring.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(3i8).pow(4), Wrapping(81));Run
Results that are too large are wrapped:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13)); assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));Run
impl Wrapping<i16>[src]
pub const fn min_value() -> Self[src]
Returns the smallest value that can be represented by this integer type.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(<Wrapping<i16>>::min_value(), Wrapping(i16::min_value()));Run
pub const fn max_value() -> Self[src]
Returns the largest value that can be represented by this integer type.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(<Wrapping<i16>>::max_value(), Wrapping(i16::max_value()));Run
pub const fn count_ones(self) -> u32[src]
Returns the number of ones in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0b01001100i16); assert_eq!(n.count_ones(), 3);Run
pub const fn count_zeros(self) -> u32[src]
Returns the number of zeros in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(!0i16).count_zeros(), 0);Run
pub const fn trailing_zeros(self) -> u32[src]
Returns the number of trailing zeros in the binary representation
of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0b0101000i16); assert_eq!(n.trailing_zeros(), 3);Run
pub const fn rotate_left(self, n: u32) -> Self[src]
Shifts the bits to the left by a specified amount, n,
wrapping the truncated bits to the end of the resulting
integer.
Please note this isn't the same operation as the >> shifting
operator!
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF); let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99); assert_eq!(n.rotate_left(32), m);Run
pub const fn rotate_right(self, n: u32) -> Self[src]
Shifts the bits to the right by a specified amount, n,
wrapping the truncated bits to the beginning of the resulting
integer.
Please note this isn't the same operation as the << shifting
operator!
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF); let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322); assert_eq!(n.rotate_right(4), m);Run
pub const fn swap_bytes(self) -> Self[src]
Reverses the byte order of the integer.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i16> = Wrapping(0b0000000_01010101); assert_eq!(n, Wrapping(85)); let m = n.swap_bytes(); assert_eq!(m, Wrapping(0b01010101_00000000)); assert_eq!(m, Wrapping(21760));Run
#[must_use]
pub const fn reverse_bits(self) -> Self1.37.0[src]
Reverses the bit pattern of the integer.
Examples
Please note that this example is shared between integer types.
Which explains why i16 is used here.
Basic usage:
use std::num::Wrapping; let n = Wrapping(0b0000000_01010101i16); assert_eq!(n, Wrapping(85)); let m = n.reverse_bits(); assert_eq!(m.0 as u16, 0b10101010_00000000); assert_eq!(m, Wrapping(-22016));Run
pub const fn from_be(x: Self) -> Self[src]
Converts an integer from big endian to the target's endianness.
On big endian this is a no-op. On little endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Ai16); if cfg!(target_endian = "big") { assert_eq!(<Wrapping<i16>>::from_be(n), n) } else { assert_eq!(<Wrapping<i16>>::from_be(n), n.swap_bytes()) }Run
pub const fn from_le(x: Self) -> Self[src]
Converts an integer from little endian to the target's endianness.
On little endian this is a no-op. On big endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Ai16); if cfg!(target_endian = "little") { assert_eq!(<Wrapping<i16>>::from_le(n), n) } else { assert_eq!(<Wrapping<i16>>::from_le(n), n.swap_bytes()) }Run
pub const fn to_be(self) -> Self[src]
Converts self to big endian from the target's endianness.
On big endian this is a no-op. On little endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Ai16); if cfg!(target_endian = "big") { assert_eq!(n.to_be(), n) } else { assert_eq!(n.to_be(), n.swap_bytes()) }Run
pub const fn to_le(self) -> Self[src]
Converts self to little endian from the target's endianness.
On little endian this is a no-op. On big endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Ai16); if cfg!(target_endian = "little") { assert_eq!(n.to_le(), n) } else { assert_eq!(n.to_le(), n.swap_bytes()) }Run
pub fn pow(self, exp: u32) -> Self[src]
Raises self to the power of exp, using exponentiation by squaring.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(3i16).pow(4), Wrapping(81));Run
Results that are too large are wrapped:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13)); assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));Run
impl Wrapping<i32>[src]
pub const fn min_value() -> Self[src]
Returns the smallest value that can be represented by this integer type.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(<Wrapping<i32>>::min_value(), Wrapping(i32::min_value()));Run
pub const fn max_value() -> Self[src]
Returns the largest value that can be represented by this integer type.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(<Wrapping<i32>>::max_value(), Wrapping(i32::max_value()));Run
pub const fn count_ones(self) -> u32[src]
Returns the number of ones in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0b01001100i32); assert_eq!(n.count_ones(), 3);Run
pub const fn count_zeros(self) -> u32[src]
Returns the number of zeros in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(!0i32).count_zeros(), 0);Run
pub const fn trailing_zeros(self) -> u32[src]
Returns the number of trailing zeros in the binary representation
of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0b0101000i32); assert_eq!(n.trailing_zeros(), 3);Run
pub const fn rotate_left(self, n: u32) -> Self[src]
Shifts the bits to the left by a specified amount, n,
wrapping the truncated bits to the end of the resulting
integer.
Please note this isn't the same operation as the >> shifting
operator!
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF); let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99); assert_eq!(n.rotate_left(32), m);Run
pub const fn rotate_right(self, n: u32) -> Self[src]
Shifts the bits to the right by a specified amount, n,
wrapping the truncated bits to the beginning of the resulting
integer.
Please note this isn't the same operation as the << shifting
operator!
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF); let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322); assert_eq!(n.rotate_right(4), m);Run
pub const fn swap_bytes(self) -> Self[src]
Reverses the byte order of the integer.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i16> = Wrapping(0b0000000_01010101); assert_eq!(n, Wrapping(85)); let m = n.swap_bytes(); assert_eq!(m, Wrapping(0b01010101_00000000)); assert_eq!(m, Wrapping(21760));Run
#[must_use]
pub const fn reverse_bits(self) -> Self1.37.0[src]
Reverses the bit pattern of the integer.
Examples
Please note that this example is shared between integer types.
Which explains why i16 is used here.
Basic usage:
use std::num::Wrapping; let n = Wrapping(0b0000000_01010101i16); assert_eq!(n, Wrapping(85)); let m = n.reverse_bits(); assert_eq!(m.0 as u16, 0b10101010_00000000); assert_eq!(m, Wrapping(-22016));Run
pub const fn from_be(x: Self) -> Self[src]
Converts an integer from big endian to the target's endianness.
On big endian this is a no-op. On little endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Ai32); if cfg!(target_endian = "big") { assert_eq!(<Wrapping<i32>>::from_be(n), n) } else { assert_eq!(<Wrapping<i32>>::from_be(n), n.swap_bytes()) }Run
pub const fn from_le(x: Self) -> Self[src]
Converts an integer from little endian to the target's endianness.
On little endian this is a no-op. On big endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Ai32); if cfg!(target_endian = "little") { assert_eq!(<Wrapping<i32>>::from_le(n), n) } else { assert_eq!(<Wrapping<i32>>::from_le(n), n.swap_bytes()) }Run
pub const fn to_be(self) -> Self[src]
Converts self to big endian from the target's endianness.
On big endian this is a no-op. On little endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Ai32); if cfg!(target_endian = "big") { assert_eq!(n.to_be(), n) } else { assert_eq!(n.to_be(), n.swap_bytes()) }Run
pub const fn to_le(self) -> Self[src]
Converts self to little endian from the target's endianness.
On little endian this is a no-op. On big endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Ai32); if cfg!(target_endian = "little") { assert_eq!(n.to_le(), n) } else { assert_eq!(n.to_le(), n.swap_bytes()) }Run
pub fn pow(self, exp: u32) -> Self[src]
Raises self to the power of exp, using exponentiation by squaring.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(3i32).pow(4), Wrapping(81));Run
Results that are too large are wrapped:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13)); assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));Run
impl Wrapping<i64>[src]
pub const fn min_value() -> Self[src]
Returns the smallest value that can be represented by this integer type.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(<Wrapping<i64>>::min_value(), Wrapping(i64::min_value()));Run
pub const fn max_value() -> Self[src]
Returns the largest value that can be represented by this integer type.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(<Wrapping<i64>>::max_value(), Wrapping(i64::max_value()));Run
pub const fn count_ones(self) -> u32[src]
Returns the number of ones in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0b01001100i64); assert_eq!(n.count_ones(), 3);Run
pub const fn count_zeros(self) -> u32[src]
Returns the number of zeros in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(!0i64).count_zeros(), 0);Run
pub const fn trailing_zeros(self) -> u32[src]
Returns the number of trailing zeros in the binary representation
of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0b0101000i64); assert_eq!(n.trailing_zeros(), 3);Run
pub const fn rotate_left(self, n: u32) -> Self[src]
Shifts the bits to the left by a specified amount, n,
wrapping the truncated bits to the end of the resulting
integer.
Please note this isn't the same operation as the >> shifting
operator!
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF); let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99); assert_eq!(n.rotate_left(32), m);Run
pub const fn rotate_right(self, n: u32) -> Self[src]
Shifts the bits to the right by a specified amount, n,
wrapping the truncated bits to the beginning of the resulting
integer.
Please note this isn't the same operation as the << shifting
operator!
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF); let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322); assert_eq!(n.rotate_right(4), m);Run
pub const fn swap_bytes(self) -> Self[src]
Reverses the byte order of the integer.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i16> = Wrapping(0b0000000_01010101); assert_eq!(n, Wrapping(85)); let m = n.swap_bytes(); assert_eq!(m, Wrapping(0b01010101_00000000)); assert_eq!(m, Wrapping(21760));Run
#[must_use]
pub const fn reverse_bits(self) -> Self1.37.0[src]
Reverses the bit pattern of the integer.
Examples
Please note that this example is shared between integer types.
Which explains why i16 is used here.
Basic usage:
use std::num::Wrapping; let n = Wrapping(0b0000000_01010101i16); assert_eq!(n, Wrapping(85)); let m = n.reverse_bits(); assert_eq!(m.0 as u16, 0b10101010_00000000); assert_eq!(m, Wrapping(-22016));Run
pub const fn from_be(x: Self) -> Self[src]
Converts an integer from big endian to the target's endianness.
On big endian this is a no-op. On little endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Ai64); if cfg!(target_endian = "big") { assert_eq!(<Wrapping<i64>>::from_be(n), n) } else { assert_eq!(<Wrapping<i64>>::from_be(n), n.swap_bytes()) }Run
pub const fn from_le(x: Self) -> Self[src]
Converts an integer from little endian to the target's endianness.
On little endian this is a no-op. On big endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Ai64); if cfg!(target_endian = "little") { assert_eq!(<Wrapping<i64>>::from_le(n), n) } else { assert_eq!(<Wrapping<i64>>::from_le(n), n.swap_bytes()) }Run
pub const fn to_be(self) -> Self[src]
Converts self to big endian from the target's endianness.
On big endian this is a no-op. On little endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Ai64); if cfg!(target_endian = "big") { assert_eq!(n.to_be(), n) } else { assert_eq!(n.to_be(), n.swap_bytes()) }Run
pub const fn to_le(self) -> Self[src]
Converts self to little endian from the target's endianness.
On little endian this is a no-op. On big endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Ai64); if cfg!(target_endian = "little") { assert_eq!(n.to_le(), n) } else { assert_eq!(n.to_le(), n.swap_bytes()) }Run
pub fn pow(self, exp: u32) -> Self[src]
Raises self to the power of exp, using exponentiation by squaring.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(3i64).pow(4), Wrapping(81));Run
Results that are too large are wrapped:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13)); assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));Run
impl Wrapping<i128>[src]
pub const fn min_value() -> Self[src]
Returns the smallest value that can be represented by this integer type.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(<Wrapping<i128>>::min_value(), Wrapping(i128::min_value()));Run
pub const fn max_value() -> Self[src]
Returns the largest value that can be represented by this integer type.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(<Wrapping<i128>>::max_value(), Wrapping(i128::max_value()));Run
pub const fn count_ones(self) -> u32[src]
Returns the number of ones in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0b01001100i128); assert_eq!(n.count_ones(), 3);Run
pub const fn count_zeros(self) -> u32[src]
Returns the number of zeros in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(!0i128).count_zeros(), 0);Run
pub const fn trailing_zeros(self) -> u32[src]
Returns the number of trailing zeros in the binary representation
of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0b0101000i128); assert_eq!(n.trailing_zeros(), 3);Run
pub const fn rotate_left(self, n: u32) -> Self[src]
Shifts the bits to the left by a specified amount, n,
wrapping the truncated bits to the end of the resulting
integer.
Please note this isn't the same operation as the >> shifting
operator!
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF); let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99); assert_eq!(n.rotate_left(32), m);Run
pub const fn rotate_right(self, n: u32) -> Self[src]
Shifts the bits to the right by a specified amount, n,
wrapping the truncated bits to the beginning of the resulting
integer.
Please note this isn't the same operation as the << shifting
operator!
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF); let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322); assert_eq!(n.rotate_right(4), m);Run
pub const fn swap_bytes(self) -> Self[src]
Reverses the byte order of the integer.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n: Wrapping<i16> = Wrapping(0b0000000_01010101); assert_eq!(n, Wrapping(85)); let m = n.swap_bytes(); assert_eq!(m, Wrapping(0b01010101_00000000)); assert_eq!(m, Wrapping(21760));Run
#[must_use]
pub const fn reverse_bits(self) -> Self1.37.0[src]
Reverses the bit pattern of the integer.
Examples
Please note that this example is shared between integer types.
Which explains why i16 is used here.
Basic usage:
use std::num::Wrapping; let n = Wrapping(0b0000000_01010101i16); assert_eq!(n, Wrapping(85)); let m = n.reverse_bits(); assert_eq!(m.0 as u16, 0b10101010_00000000); assert_eq!(m, Wrapping(-22016));Run
pub const fn from_be(x: Self) -> Self[src]
Converts an integer from big endian to the target's endianness.
On big endian this is a no-op. On little endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Ai128); if cfg!(target_endian = "big") { assert_eq!(<Wrapping<i128>>::from_be(n), n) } else { assert_eq!(<Wrapping<i128>>::from_be(n), n.swap_bytes()) }Run
pub const fn from_le(x: Self) -> Self[src]
Converts an integer from little endian to the target's endianness.
On little endian this is a no-op. On big endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Ai128); if cfg!(target_endian = "little") { assert_eq!(<Wrapping<i128>>::from_le(n), n) } else { assert_eq!(<Wrapping<i128>>::from_le(n), n.swap_bytes()) }Run
pub const fn to_be(self) -> Self[src]
Converts self to big endian from the target's endianness.
On big endian this is a no-op. On little endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Ai128); if cfg!(target_endian = "big") { assert_eq!(n.to_be(), n) } else { assert_eq!(n.to_be(), n.swap_bytes()) }Run
pub const fn to_le(self) -> Self[src]
Converts self to little endian from the target's endianness.
On little endian this is a no-op. On big endian the bytes are swapped.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(0x1Ai128); if cfg!(target_endian = "little") { assert_eq!(n.to_le(), n) } else { assert_eq!(n.to_le(), n.swap_bytes()) }Run
pub fn pow(self, exp: u32) -> Self[src]
Raises self to the power of exp, using exponentiation by squaring.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(3i128).pow(4), Wrapping(81));Run
Results that are too large are wrapped:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13)); assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));Run
impl Wrapping<isize>[src]
pub const fn leading_zeros(self) -> u32[src]
Returns the number of leading zeros in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(isize::max_value()) >> 2; assert_eq!(n.leading_zeros(), 3);Run
pub fn abs(self) -> Wrapping<isize>[src]
Computes the absolute value of self, wrapping around at
the boundary of the type.
The only case where such wrapping can occur is when one takes the absolute value of the negative
minimal value for the type this is a positive value that is too large to represent in the type. In
such a case, this function returns MIN itself.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(100isize).abs(), Wrapping(100)); assert_eq!(Wrapping(-100isize).abs(), Wrapping(100)); assert_eq!(Wrapping(isize::min_value()).abs(), Wrapping(isize::min_value())); assert_eq!(Wrapping(-128i8).abs().0 as u8, 128u8);Run
pub fn signum(self) -> Wrapping<isize>[src]
Returns a number representing sign of self.
0if the number is zero1if the number is positive-1if the number is negative
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(10isize).signum(), Wrapping(1)); assert_eq!(Wrapping(0isize).signum(), Wrapping(0)); assert_eq!(Wrapping(-10isize).signum(), Wrapping(-1));Run
pub const fn is_positive(self) -> bool[src]
Returns true if self is positive and false if the number is zero or
negative.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert!(Wrapping(10isize).is_positive()); assert!(!Wrapping(-10isize).is_positive());Run
pub const fn is_negative(self) -> bool[src]
impl Wrapping<i8>[src]
pub const fn leading_zeros(self) -> u32[src]
Returns the number of leading zeros in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(i8::max_value()) >> 2; assert_eq!(n.leading_zeros(), 3);Run
pub fn abs(self) -> Wrapping<i8>[src]
Computes the absolute value of self, wrapping around at
the boundary of the type.
The only case where such wrapping can occur is when one takes the absolute value of the negative
minimal value for the type this is a positive value that is too large to represent in the type. In
such a case, this function returns MIN itself.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(100i8).abs(), Wrapping(100)); assert_eq!(Wrapping(-100i8).abs(), Wrapping(100)); assert_eq!(Wrapping(i8::min_value()).abs(), Wrapping(i8::min_value())); assert_eq!(Wrapping(-128i8).abs().0 as u8, 128u8);Run
pub fn signum(self) -> Wrapping<i8>[src]
Returns a number representing sign of self.
0if the number is zero1if the number is positive-1if the number is negative
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(10i8).signum(), Wrapping(1)); assert_eq!(Wrapping(0i8).signum(), Wrapping(0)); assert_eq!(Wrapping(-10i8).signum(), Wrapping(-1));Run
pub const fn is_positive(self) -> bool[src]
Returns true if self is positive and false if the number is zero or
negative.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert!(Wrapping(10i8).is_positive()); assert!(!Wrapping(-10i8).is_positive());Run
pub const fn is_negative(self) -> bool[src]
impl Wrapping<i16>[src]
pub const fn leading_zeros(self) -> u32[src]
Returns the number of leading zeros in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(i16::max_value()) >> 2; assert_eq!(n.leading_zeros(), 3);Run
pub fn abs(self) -> Wrapping<i16>[src]
Computes the absolute value of self, wrapping around at
the boundary of the type.
The only case where such wrapping can occur is when one takes the absolute value of the negative
minimal value for the type this is a positive value that is too large to represent in the type. In
such a case, this function returns MIN itself.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(100i16).abs(), Wrapping(100)); assert_eq!(Wrapping(-100i16).abs(), Wrapping(100)); assert_eq!(Wrapping(i16::min_value()).abs(), Wrapping(i16::min_value())); assert_eq!(Wrapping(-128i8).abs().0 as u8, 128u8);Run
pub fn signum(self) -> Wrapping<i16>[src]
Returns a number representing sign of self.
0if the number is zero1if the number is positive-1if the number is negative
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(10i16).signum(), Wrapping(1)); assert_eq!(Wrapping(0i16).signum(), Wrapping(0)); assert_eq!(Wrapping(-10i16).signum(), Wrapping(-1));Run
pub const fn is_positive(self) -> bool[src]
Returns true if self is positive and false if the number is zero or
negative.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert!(Wrapping(10i16).is_positive()); assert!(!Wrapping(-10i16).is_positive());Run
pub const fn is_negative(self) -> bool[src]
impl Wrapping<i32>[src]
pub const fn leading_zeros(self) -> u32[src]
Returns the number of leading zeros in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(i32::max_value()) >> 2; assert_eq!(n.leading_zeros(), 3);Run
pub fn abs(self) -> Wrapping<i32>[src]
Computes the absolute value of self, wrapping around at
the boundary of the type.
The only case where such wrapping can occur is when one takes the absolute value of the negative
minimal value for the type this is a positive value that is too large to represent in the type. In
such a case, this function returns MIN itself.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(100i32).abs(), Wrapping(100)); assert_eq!(Wrapping(-100i32).abs(), Wrapping(100)); assert_eq!(Wrapping(i32::min_value()).abs(), Wrapping(i32::min_value())); assert_eq!(Wrapping(-128i8).abs().0 as u8, 128u8);Run
pub fn signum(self) -> Wrapping<i32>[src]
Returns a number representing sign of self.
0if the number is zero1if the number is positive-1if the number is negative
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(10i32).signum(), Wrapping(1)); assert_eq!(Wrapping(0i32).signum(), Wrapping(0)); assert_eq!(Wrapping(-10i32).signum(), Wrapping(-1));Run
pub const fn is_positive(self) -> bool[src]
Returns true if self is positive and false if the number is zero or
negative.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert!(Wrapping(10i32).is_positive()); assert!(!Wrapping(-10i32).is_positive());Run
pub const fn is_negative(self) -> bool[src]
impl Wrapping<i64>[src]
pub const fn leading_zeros(self) -> u32[src]
Returns the number of leading zeros in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(i64::max_value()) >> 2; assert_eq!(n.leading_zeros(), 3);Run
pub fn abs(self) -> Wrapping<i64>[src]
Computes the absolute value of self, wrapping around at
the boundary of the type.
The only case where such wrapping can occur is when one takes the absolute value of the negative
minimal value for the type this is a positive value that is too large to represent in the type. In
such a case, this function returns MIN itself.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(100i64).abs(), Wrapping(100)); assert_eq!(Wrapping(-100i64).abs(), Wrapping(100)); assert_eq!(Wrapping(i64::min_value()).abs(), Wrapping(i64::min_value())); assert_eq!(Wrapping(-128i8).abs().0 as u8, 128u8);Run
pub fn signum(self) -> Wrapping<i64>[src]
Returns a number representing sign of self.
0if the number is zero1if the number is positive-1if the number is negative
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(10i64).signum(), Wrapping(1)); assert_eq!(Wrapping(0i64).signum(), Wrapping(0)); assert_eq!(Wrapping(-10i64).signum(), Wrapping(-1));Run
pub const fn is_positive(self) -> bool[src]
Returns true if self is positive and false if the number is zero or
negative.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert!(Wrapping(10i64).is_positive()); assert!(!Wrapping(-10i64).is_positive());Run
pub const fn is_negative(self) -> bool[src]
impl Wrapping<i128>[src]
pub const fn leading_zeros(self) -> u32[src]
Returns the number of leading zeros in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(i128::max_value()) >> 2; assert_eq!(n.leading_zeros(), 3);Run
pub fn abs(self) -> Wrapping<i128>[src]
Computes the absolute value of self, wrapping around at
the boundary of the type.
The only case where such wrapping can occur is when one takes the absolute value of the negative
minimal value for the type this is a positive value that is too large to represent in the type. In
such a case, this function returns MIN itself.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(100i128).abs(), Wrapping(100)); assert_eq!(Wrapping(-100i128).abs(), Wrapping(100)); assert_eq!(Wrapping(i128::min_value()).abs(), Wrapping(i128::min_value())); assert_eq!(Wrapping(-128i8).abs().0 as u8, 128u8);Run
pub fn signum(self) -> Wrapping<i128>[src]
Returns a number representing sign of self.
0if the number is zero1if the number is positive-1if the number is negative
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert_eq!(Wrapping(10i128).signum(), Wrapping(1)); assert_eq!(Wrapping(0i128).signum(), Wrapping(0)); assert_eq!(Wrapping(-10i128).signum(), Wrapping(-1));Run
pub const fn is_positive(self) -> bool[src]
Returns true if self is positive and false if the number is zero or
negative.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert!(Wrapping(10i128).is_positive()); assert!(!Wrapping(-10i128).is_positive());Run
pub const fn is_negative(self) -> bool[src]
impl Wrapping<usize>[src]
pub const fn leading_zeros(self) -> u32[src]
Returns the number of leading zeros in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(usize::max_value()) >> 2; assert_eq!(n.leading_zeros(), 2);Run
pub fn is_power_of_two(self) -> bool[src]
Returns true if and only if self == 2^k for some k.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert!(Wrapping(16usize).is_power_of_two()); assert!(!Wrapping(10usize).is_power_of_two());Run
pub fn next_power_of_two(self) -> Self[src]
🔬 This is a nightly-only experimental API. (wrapping_next_power_of_two #32463)
needs decision on wrapping behaviour
Returns the smallest power of two greater than or equal to self.
When return value overflows (i.e., self > (1 << (N-1)) for type
uN), overflows to 2^N = 0.
Examples
Basic usage:
#![feature(wrapping_next_power_of_two)] use std::num::Wrapping; assert_eq!(Wrapping(2usize).next_power_of_two(), Wrapping(2)); assert_eq!(Wrapping(3usize).next_power_of_two(), Wrapping(4)); assert_eq!(Wrapping(200_u8).next_power_of_two(), Wrapping(0));Run
impl Wrapping<u8>[src]
pub const fn leading_zeros(self) -> u32[src]
Returns the number of leading zeros in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(u8::max_value()) >> 2; assert_eq!(n.leading_zeros(), 2);Run
pub fn is_power_of_two(self) -> bool[src]
Returns true if and only if self == 2^k for some k.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert!(Wrapping(16u8).is_power_of_two()); assert!(!Wrapping(10u8).is_power_of_two());Run
pub fn next_power_of_two(self) -> Self[src]
🔬 This is a nightly-only experimental API. (wrapping_next_power_of_two #32463)
needs decision on wrapping behaviour
Returns the smallest power of two greater than or equal to self.
When return value overflows (i.e., self > (1 << (N-1)) for type
uN), overflows to 2^N = 0.
Examples
Basic usage:
#![feature(wrapping_next_power_of_two)] use std::num::Wrapping; assert_eq!(Wrapping(2u8).next_power_of_two(), Wrapping(2)); assert_eq!(Wrapping(3u8).next_power_of_two(), Wrapping(4)); assert_eq!(Wrapping(200_u8).next_power_of_two(), Wrapping(0));Run
impl Wrapping<u16>[src]
pub const fn leading_zeros(self) -> u32[src]
Returns the number of leading zeros in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(u16::max_value()) >> 2; assert_eq!(n.leading_zeros(), 2);Run
pub fn is_power_of_two(self) -> bool[src]
Returns true if and only if self == 2^k for some k.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert!(Wrapping(16u16).is_power_of_two()); assert!(!Wrapping(10u16).is_power_of_two());Run
pub fn next_power_of_two(self) -> Self[src]
🔬 This is a nightly-only experimental API. (wrapping_next_power_of_two #32463)
needs decision on wrapping behaviour
Returns the smallest power of two greater than or equal to self.
When return value overflows (i.e., self > (1 << (N-1)) for type
uN), overflows to 2^N = 0.
Examples
Basic usage:
#![feature(wrapping_next_power_of_two)] use std::num::Wrapping; assert_eq!(Wrapping(2u16).next_power_of_two(), Wrapping(2)); assert_eq!(Wrapping(3u16).next_power_of_two(), Wrapping(4)); assert_eq!(Wrapping(200_u8).next_power_of_two(), Wrapping(0));Run
impl Wrapping<u32>[src]
pub const fn leading_zeros(self) -> u32[src]
Returns the number of leading zeros in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(u32::max_value()) >> 2; assert_eq!(n.leading_zeros(), 2);Run
pub fn is_power_of_two(self) -> bool[src]
Returns true if and only if self == 2^k for some k.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert!(Wrapping(16u32).is_power_of_two()); assert!(!Wrapping(10u32).is_power_of_two());Run
pub fn next_power_of_two(self) -> Self[src]
🔬 This is a nightly-only experimental API. (wrapping_next_power_of_two #32463)
needs decision on wrapping behaviour
Returns the smallest power of two greater than or equal to self.
When return value overflows (i.e., self > (1 << (N-1)) for type
uN), overflows to 2^N = 0.
Examples
Basic usage:
#![feature(wrapping_next_power_of_two)] use std::num::Wrapping; assert_eq!(Wrapping(2u32).next_power_of_two(), Wrapping(2)); assert_eq!(Wrapping(3u32).next_power_of_two(), Wrapping(4)); assert_eq!(Wrapping(200_u8).next_power_of_two(), Wrapping(0));Run
impl Wrapping<u64>[src]
pub const fn leading_zeros(self) -> u32[src]
Returns the number of leading zeros in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(u64::max_value()) >> 2; assert_eq!(n.leading_zeros(), 2);Run
pub fn is_power_of_two(self) -> bool[src]
Returns true if and only if self == 2^k for some k.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert!(Wrapping(16u64).is_power_of_two()); assert!(!Wrapping(10u64).is_power_of_two());Run
pub fn next_power_of_two(self) -> Self[src]
🔬 This is a nightly-only experimental API. (wrapping_next_power_of_two #32463)
needs decision on wrapping behaviour
Returns the smallest power of two greater than or equal to self.
When return value overflows (i.e., self > (1 << (N-1)) for type
uN), overflows to 2^N = 0.
Examples
Basic usage:
#![feature(wrapping_next_power_of_two)] use std::num::Wrapping; assert_eq!(Wrapping(2u64).next_power_of_two(), Wrapping(2)); assert_eq!(Wrapping(3u64).next_power_of_two(), Wrapping(4)); assert_eq!(Wrapping(200_u8).next_power_of_two(), Wrapping(0));Run
impl Wrapping<u128>[src]
pub const fn leading_zeros(self) -> u32[src]
Returns the number of leading zeros in the binary representation of self.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; let n = Wrapping(u128::max_value()) >> 2; assert_eq!(n.leading_zeros(), 2);Run
pub fn is_power_of_two(self) -> bool[src]
Returns true if and only if self == 2^k for some k.
Examples
Basic usage:
#![feature(wrapping_int_impl)] use std::num::Wrapping; assert!(Wrapping(16u128).is_power_of_two()); assert!(!Wrapping(10u128).is_power_of_two());Run
pub fn next_power_of_two(self) -> Self[src]
🔬 This is a nightly-only experimental API. (wrapping_next_power_of_two #32463)
needs decision on wrapping behaviour
Returns the smallest power of two greater than or equal to self.
When return value overflows (i.e., self > (1 << (N-1)) for type
uN), overflows to 2^N = 0.
Examples
Basic usage:
#![feature(wrapping_next_power_of_two)] use std::num::Wrapping; assert_eq!(Wrapping(2u128).next_power_of_two(), Wrapping(2)); assert_eq!(Wrapping(3u128).next_power_of_two(), Wrapping(4)); assert_eq!(Wrapping(200_u8).next_power_of_two(), Wrapping(0));Run
Trait Implementations
impl<T: Copy> Copy for Wrapping<T>[src]
impl Add<Wrapping<usize>> for Wrapping<usize>[src]
type Output = Wrapping<usize>
The resulting type after applying the + operator.
fn add(self, other: Wrapping<usize>) -> Wrapping<usize>[src]
impl<'a> Add<Wrapping<usize>> for &'a Wrapping<usize>1.14.0[src]
type Output = <Wrapping<usize> as Add<Wrapping<usize>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: Wrapping<usize>
) -> <Wrapping<usize> as Add<Wrapping<usize>>>::Output[src]
self,
other: Wrapping<usize>
) -> <Wrapping<usize> as Add<Wrapping<usize>>>::Output
impl<'_> Add<&'_ Wrapping<usize>> for Wrapping<usize>1.14.0[src]
type Output = <Wrapping<usize> as Add<Wrapping<usize>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as Add<Wrapping<usize>>>::Output[src]
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as Add<Wrapping<usize>>>::Output
impl<'_, '_> Add<&'_ Wrapping<usize>> for &'_ Wrapping<usize>1.14.0[src]
type Output = <Wrapping<usize> as Add<Wrapping<usize>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as Add<Wrapping<usize>>>::Output[src]
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as Add<Wrapping<usize>>>::Output
impl Add<Wrapping<u8>> for Wrapping<u8>[src]
type Output = Wrapping<u8>
The resulting type after applying the + operator.
fn add(self, other: Wrapping<u8>) -> Wrapping<u8>[src]
impl<'a> Add<Wrapping<u8>> for &'a Wrapping<u8>1.14.0[src]
type Output = <Wrapping<u8> as Add<Wrapping<u8>>>::Output
The resulting type after applying the + operator.
fn add(self, other: Wrapping<u8>) -> <Wrapping<u8> as Add<Wrapping<u8>>>::Output[src]
impl<'_> Add<&'_ Wrapping<u8>> for Wrapping<u8>1.14.0[src]
type Output = <Wrapping<u8> as Add<Wrapping<u8>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as Add<Wrapping<u8>>>::Output[src]
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as Add<Wrapping<u8>>>::Output
impl<'_, '_> Add<&'_ Wrapping<u8>> for &'_ Wrapping<u8>1.14.0[src]
type Output = <Wrapping<u8> as Add<Wrapping<u8>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as Add<Wrapping<u8>>>::Output[src]
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as Add<Wrapping<u8>>>::Output
impl Add<Wrapping<u16>> for Wrapping<u16>[src]
type Output = Wrapping<u16>
The resulting type after applying the + operator.
fn add(self, other: Wrapping<u16>) -> Wrapping<u16>[src]
impl<'a> Add<Wrapping<u16>> for &'a Wrapping<u16>1.14.0[src]
type Output = <Wrapping<u16> as Add<Wrapping<u16>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: Wrapping<u16>
) -> <Wrapping<u16> as Add<Wrapping<u16>>>::Output[src]
self,
other: Wrapping<u16>
) -> <Wrapping<u16> as Add<Wrapping<u16>>>::Output
impl<'_> Add<&'_ Wrapping<u16>> for Wrapping<u16>1.14.0[src]
type Output = <Wrapping<u16> as Add<Wrapping<u16>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as Add<Wrapping<u16>>>::Output[src]
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as Add<Wrapping<u16>>>::Output
impl<'_, '_> Add<&'_ Wrapping<u16>> for &'_ Wrapping<u16>1.14.0[src]
type Output = <Wrapping<u16> as Add<Wrapping<u16>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as Add<Wrapping<u16>>>::Output[src]
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as Add<Wrapping<u16>>>::Output
impl Add<Wrapping<u32>> for Wrapping<u32>[src]
type Output = Wrapping<u32>
The resulting type after applying the + operator.
fn add(self, other: Wrapping<u32>) -> Wrapping<u32>[src]
impl<'a> Add<Wrapping<u32>> for &'a Wrapping<u32>1.14.0[src]
type Output = <Wrapping<u32> as Add<Wrapping<u32>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: Wrapping<u32>
) -> <Wrapping<u32> as Add<Wrapping<u32>>>::Output[src]
self,
other: Wrapping<u32>
) -> <Wrapping<u32> as Add<Wrapping<u32>>>::Output
impl<'_> Add<&'_ Wrapping<u32>> for Wrapping<u32>1.14.0[src]
type Output = <Wrapping<u32> as Add<Wrapping<u32>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as Add<Wrapping<u32>>>::Output[src]
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as Add<Wrapping<u32>>>::Output
impl<'_, '_> Add<&'_ Wrapping<u32>> for &'_ Wrapping<u32>1.14.0[src]
type Output = <Wrapping<u32> as Add<Wrapping<u32>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as Add<Wrapping<u32>>>::Output[src]
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as Add<Wrapping<u32>>>::Output
impl Add<Wrapping<u64>> for Wrapping<u64>[src]
type Output = Wrapping<u64>
The resulting type after applying the + operator.
fn add(self, other: Wrapping<u64>) -> Wrapping<u64>[src]
impl<'a> Add<Wrapping<u64>> for &'a Wrapping<u64>1.14.0[src]
type Output = <Wrapping<u64> as Add<Wrapping<u64>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: Wrapping<u64>
) -> <Wrapping<u64> as Add<Wrapping<u64>>>::Output[src]
self,
other: Wrapping<u64>
) -> <Wrapping<u64> as Add<Wrapping<u64>>>::Output
impl<'_> Add<&'_ Wrapping<u64>> for Wrapping<u64>1.14.0[src]
type Output = <Wrapping<u64> as Add<Wrapping<u64>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as Add<Wrapping<u64>>>::Output[src]
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as Add<Wrapping<u64>>>::Output
impl<'_, '_> Add<&'_ Wrapping<u64>> for &'_ Wrapping<u64>1.14.0[src]
type Output = <Wrapping<u64> as Add<Wrapping<u64>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as Add<Wrapping<u64>>>::Output[src]
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as Add<Wrapping<u64>>>::Output
impl Add<Wrapping<u128>> for Wrapping<u128>[src]
type Output = Wrapping<u128>
The resulting type after applying the + operator.
fn add(self, other: Wrapping<u128>) -> Wrapping<u128>[src]
impl<'a> Add<Wrapping<u128>> for &'a Wrapping<u128>1.14.0[src]
type Output = <Wrapping<u128> as Add<Wrapping<u128>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: Wrapping<u128>
) -> <Wrapping<u128> as Add<Wrapping<u128>>>::Output[src]
self,
other: Wrapping<u128>
) -> <Wrapping<u128> as Add<Wrapping<u128>>>::Output
impl<'_> Add<&'_ Wrapping<u128>> for Wrapping<u128>1.14.0[src]
type Output = <Wrapping<u128> as Add<Wrapping<u128>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as Add<Wrapping<u128>>>::Output[src]
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as Add<Wrapping<u128>>>::Output
impl<'_, '_> Add<&'_ Wrapping<u128>> for &'_ Wrapping<u128>1.14.0[src]
type Output = <Wrapping<u128> as Add<Wrapping<u128>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as Add<Wrapping<u128>>>::Output[src]
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as Add<Wrapping<u128>>>::Output
impl Add<Wrapping<isize>> for Wrapping<isize>[src]
type Output = Wrapping<isize>
The resulting type after applying the + operator.
fn add(self, other: Wrapping<isize>) -> Wrapping<isize>[src]
impl<'a> Add<Wrapping<isize>> for &'a Wrapping<isize>1.14.0[src]
type Output = <Wrapping<isize> as Add<Wrapping<isize>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: Wrapping<isize>
) -> <Wrapping<isize> as Add<Wrapping<isize>>>::Output[src]
self,
other: Wrapping<isize>
) -> <Wrapping<isize> as Add<Wrapping<isize>>>::Output
impl<'_> Add<&'_ Wrapping<isize>> for Wrapping<isize>1.14.0[src]
type Output = <Wrapping<isize> as Add<Wrapping<isize>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as Add<Wrapping<isize>>>::Output[src]
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as Add<Wrapping<isize>>>::Output
impl<'_, '_> Add<&'_ Wrapping<isize>> for &'_ Wrapping<isize>1.14.0[src]
type Output = <Wrapping<isize> as Add<Wrapping<isize>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as Add<Wrapping<isize>>>::Output[src]
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as Add<Wrapping<isize>>>::Output
impl Add<Wrapping<i8>> for Wrapping<i8>[src]
type Output = Wrapping<i8>
The resulting type after applying the + operator.
fn add(self, other: Wrapping<i8>) -> Wrapping<i8>[src]
impl<'a> Add<Wrapping<i8>> for &'a Wrapping<i8>1.14.0[src]
type Output = <Wrapping<i8> as Add<Wrapping<i8>>>::Output
The resulting type after applying the + operator.
fn add(self, other: Wrapping<i8>) -> <Wrapping<i8> as Add<Wrapping<i8>>>::Output[src]
impl<'_> Add<&'_ Wrapping<i8>> for Wrapping<i8>1.14.0[src]
type Output = <Wrapping<i8> as Add<Wrapping<i8>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as Add<Wrapping<i8>>>::Output[src]
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as Add<Wrapping<i8>>>::Output
impl<'_, '_> Add<&'_ Wrapping<i8>> for &'_ Wrapping<i8>1.14.0[src]
type Output = <Wrapping<i8> as Add<Wrapping<i8>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as Add<Wrapping<i8>>>::Output[src]
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as Add<Wrapping<i8>>>::Output
impl Add<Wrapping<i16>> for Wrapping<i16>[src]
type Output = Wrapping<i16>
The resulting type after applying the + operator.
fn add(self, other: Wrapping<i16>) -> Wrapping<i16>[src]
impl<'a> Add<Wrapping<i16>> for &'a Wrapping<i16>1.14.0[src]
type Output = <Wrapping<i16> as Add<Wrapping<i16>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: Wrapping<i16>
) -> <Wrapping<i16> as Add<Wrapping<i16>>>::Output[src]
self,
other: Wrapping<i16>
) -> <Wrapping<i16> as Add<Wrapping<i16>>>::Output
impl<'_> Add<&'_ Wrapping<i16>> for Wrapping<i16>1.14.0[src]
type Output = <Wrapping<i16> as Add<Wrapping<i16>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as Add<Wrapping<i16>>>::Output[src]
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as Add<Wrapping<i16>>>::Output
impl<'_, '_> Add<&'_ Wrapping<i16>> for &'_ Wrapping<i16>1.14.0[src]
type Output = <Wrapping<i16> as Add<Wrapping<i16>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as Add<Wrapping<i16>>>::Output[src]
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as Add<Wrapping<i16>>>::Output
impl Add<Wrapping<i32>> for Wrapping<i32>[src]
type Output = Wrapping<i32>
The resulting type after applying the + operator.
fn add(self, other: Wrapping<i32>) -> Wrapping<i32>[src]
impl<'a> Add<Wrapping<i32>> for &'a Wrapping<i32>1.14.0[src]
type Output = <Wrapping<i32> as Add<Wrapping<i32>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: Wrapping<i32>
) -> <Wrapping<i32> as Add<Wrapping<i32>>>::Output[src]
self,
other: Wrapping<i32>
) -> <Wrapping<i32> as Add<Wrapping<i32>>>::Output
impl<'_> Add<&'_ Wrapping<i32>> for Wrapping<i32>1.14.0[src]
type Output = <Wrapping<i32> as Add<Wrapping<i32>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as Add<Wrapping<i32>>>::Output[src]
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as Add<Wrapping<i32>>>::Output
impl<'_, '_> Add<&'_ Wrapping<i32>> for &'_ Wrapping<i32>1.14.0[src]
type Output = <Wrapping<i32> as Add<Wrapping<i32>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as Add<Wrapping<i32>>>::Output[src]
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as Add<Wrapping<i32>>>::Output
impl Add<Wrapping<i64>> for Wrapping<i64>[src]
type Output = Wrapping<i64>
The resulting type after applying the + operator.
fn add(self, other: Wrapping<i64>) -> Wrapping<i64>[src]
impl<'a> Add<Wrapping<i64>> for &'a Wrapping<i64>1.14.0[src]
type Output = <Wrapping<i64> as Add<Wrapping<i64>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: Wrapping<i64>
) -> <Wrapping<i64> as Add<Wrapping<i64>>>::Output[src]
self,
other: Wrapping<i64>
) -> <Wrapping<i64> as Add<Wrapping<i64>>>::Output
impl<'_> Add<&'_ Wrapping<i64>> for Wrapping<i64>1.14.0[src]
type Output = <Wrapping<i64> as Add<Wrapping<i64>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as Add<Wrapping<i64>>>::Output[src]
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as Add<Wrapping<i64>>>::Output
impl<'_, '_> Add<&'_ Wrapping<i64>> for &'_ Wrapping<i64>1.14.0[src]
type Output = <Wrapping<i64> as Add<Wrapping<i64>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as Add<Wrapping<i64>>>::Output[src]
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as Add<Wrapping<i64>>>::Output
impl Add<Wrapping<i128>> for Wrapping<i128>[src]
type Output = Wrapping<i128>
The resulting type after applying the + operator.
fn add(self, other: Wrapping<i128>) -> Wrapping<i128>[src]
impl<'a> Add<Wrapping<i128>> for &'a Wrapping<i128>1.14.0[src]
type Output = <Wrapping<i128> as Add<Wrapping<i128>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: Wrapping<i128>
) -> <Wrapping<i128> as Add<Wrapping<i128>>>::Output[src]
self,
other: Wrapping<i128>
) -> <Wrapping<i128> as Add<Wrapping<i128>>>::Output
impl<'_> Add<&'_ Wrapping<i128>> for Wrapping<i128>1.14.0[src]
type Output = <Wrapping<i128> as Add<Wrapping<i128>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as Add<Wrapping<i128>>>::Output[src]
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as Add<Wrapping<i128>>>::Output
impl<'_, '_> Add<&'_ Wrapping<i128>> for &'_ Wrapping<i128>1.14.0[src]
type Output = <Wrapping<i128> as Add<Wrapping<i128>>>::Output
The resulting type after applying the + operator.
fn add(
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as Add<Wrapping<i128>>>::Output[src]
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as Add<Wrapping<i128>>>::Output
impl Sub<Wrapping<usize>> for Wrapping<usize>[src]
type Output = Wrapping<usize>
The resulting type after applying the - operator.
fn sub(self, other: Wrapping<usize>) -> Wrapping<usize>[src]
impl<'a> Sub<Wrapping<usize>> for &'a Wrapping<usize>1.14.0[src]
type Output = <Wrapping<usize> as Sub<Wrapping<usize>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: Wrapping<usize>
) -> <Wrapping<usize> as Sub<Wrapping<usize>>>::Output[src]
self,
other: Wrapping<usize>
) -> <Wrapping<usize> as Sub<Wrapping<usize>>>::Output
impl<'_> Sub<&'_ Wrapping<usize>> for Wrapping<usize>1.14.0[src]
type Output = <Wrapping<usize> as Sub<Wrapping<usize>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as Sub<Wrapping<usize>>>::Output[src]
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as Sub<Wrapping<usize>>>::Output
impl<'_, '_> Sub<&'_ Wrapping<usize>> for &'_ Wrapping<usize>1.14.0[src]
type Output = <Wrapping<usize> as Sub<Wrapping<usize>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as Sub<Wrapping<usize>>>::Output[src]
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as Sub<Wrapping<usize>>>::Output
impl Sub<Wrapping<u8>> for Wrapping<u8>[src]
type Output = Wrapping<u8>
The resulting type after applying the - operator.
fn sub(self, other: Wrapping<u8>) -> Wrapping<u8>[src]
impl<'a> Sub<Wrapping<u8>> for &'a Wrapping<u8>1.14.0[src]
type Output = <Wrapping<u8> as Sub<Wrapping<u8>>>::Output
The resulting type after applying the - operator.
fn sub(self, other: Wrapping<u8>) -> <Wrapping<u8> as Sub<Wrapping<u8>>>::Output[src]
impl<'_> Sub<&'_ Wrapping<u8>> for Wrapping<u8>1.14.0[src]
type Output = <Wrapping<u8> as Sub<Wrapping<u8>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as Sub<Wrapping<u8>>>::Output[src]
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as Sub<Wrapping<u8>>>::Output
impl<'_, '_> Sub<&'_ Wrapping<u8>> for &'_ Wrapping<u8>1.14.0[src]
type Output = <Wrapping<u8> as Sub<Wrapping<u8>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as Sub<Wrapping<u8>>>::Output[src]
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as Sub<Wrapping<u8>>>::Output
impl Sub<Wrapping<u16>> for Wrapping<u16>[src]
type Output = Wrapping<u16>
The resulting type after applying the - operator.
fn sub(self, other: Wrapping<u16>) -> Wrapping<u16>[src]
impl<'a> Sub<Wrapping<u16>> for &'a Wrapping<u16>1.14.0[src]
type Output = <Wrapping<u16> as Sub<Wrapping<u16>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: Wrapping<u16>
) -> <Wrapping<u16> as Sub<Wrapping<u16>>>::Output[src]
self,
other: Wrapping<u16>
) -> <Wrapping<u16> as Sub<Wrapping<u16>>>::Output
impl<'_> Sub<&'_ Wrapping<u16>> for Wrapping<u16>1.14.0[src]
type Output = <Wrapping<u16> as Sub<Wrapping<u16>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as Sub<Wrapping<u16>>>::Output[src]
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as Sub<Wrapping<u16>>>::Output
impl<'_, '_> Sub<&'_ Wrapping<u16>> for &'_ Wrapping<u16>1.14.0[src]
type Output = <Wrapping<u16> as Sub<Wrapping<u16>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as Sub<Wrapping<u16>>>::Output[src]
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as Sub<Wrapping<u16>>>::Output
impl Sub<Wrapping<u32>> for Wrapping<u32>[src]
type Output = Wrapping<u32>
The resulting type after applying the - operator.
fn sub(self, other: Wrapping<u32>) -> Wrapping<u32>[src]
impl<'a> Sub<Wrapping<u32>> for &'a Wrapping<u32>1.14.0[src]
type Output = <Wrapping<u32> as Sub<Wrapping<u32>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: Wrapping<u32>
) -> <Wrapping<u32> as Sub<Wrapping<u32>>>::Output[src]
self,
other: Wrapping<u32>
) -> <Wrapping<u32> as Sub<Wrapping<u32>>>::Output
impl<'_> Sub<&'_ Wrapping<u32>> for Wrapping<u32>1.14.0[src]
type Output = <Wrapping<u32> as Sub<Wrapping<u32>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as Sub<Wrapping<u32>>>::Output[src]
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as Sub<Wrapping<u32>>>::Output
impl<'_, '_> Sub<&'_ Wrapping<u32>> for &'_ Wrapping<u32>1.14.0[src]
type Output = <Wrapping<u32> as Sub<Wrapping<u32>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as Sub<Wrapping<u32>>>::Output[src]
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as Sub<Wrapping<u32>>>::Output
impl Sub<Wrapping<u64>> for Wrapping<u64>[src]
type Output = Wrapping<u64>
The resulting type after applying the - operator.
fn sub(self, other: Wrapping<u64>) -> Wrapping<u64>[src]
impl<'a> Sub<Wrapping<u64>> for &'a Wrapping<u64>1.14.0[src]
type Output = <Wrapping<u64> as Sub<Wrapping<u64>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: Wrapping<u64>
) -> <Wrapping<u64> as Sub<Wrapping<u64>>>::Output[src]
self,
other: Wrapping<u64>
) -> <Wrapping<u64> as Sub<Wrapping<u64>>>::Output
impl<'_> Sub<&'_ Wrapping<u64>> for Wrapping<u64>1.14.0[src]
type Output = <Wrapping<u64> as Sub<Wrapping<u64>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as Sub<Wrapping<u64>>>::Output[src]
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as Sub<Wrapping<u64>>>::Output
impl<'_, '_> Sub<&'_ Wrapping<u64>> for &'_ Wrapping<u64>1.14.0[src]
type Output = <Wrapping<u64> as Sub<Wrapping<u64>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as Sub<Wrapping<u64>>>::Output[src]
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as Sub<Wrapping<u64>>>::Output
impl Sub<Wrapping<u128>> for Wrapping<u128>[src]
type Output = Wrapping<u128>
The resulting type after applying the - operator.
fn sub(self, other: Wrapping<u128>) -> Wrapping<u128>[src]
impl<'a> Sub<Wrapping<u128>> for &'a Wrapping<u128>1.14.0[src]
type Output = <Wrapping<u128> as Sub<Wrapping<u128>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: Wrapping<u128>
) -> <Wrapping<u128> as Sub<Wrapping<u128>>>::Output[src]
self,
other: Wrapping<u128>
) -> <Wrapping<u128> as Sub<Wrapping<u128>>>::Output
impl<'_> Sub<&'_ Wrapping<u128>> for Wrapping<u128>1.14.0[src]
type Output = <Wrapping<u128> as Sub<Wrapping<u128>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as Sub<Wrapping<u128>>>::Output[src]
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as Sub<Wrapping<u128>>>::Output
impl<'_, '_> Sub<&'_ Wrapping<u128>> for &'_ Wrapping<u128>1.14.0[src]
type Output = <Wrapping<u128> as Sub<Wrapping<u128>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as Sub<Wrapping<u128>>>::Output[src]
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as Sub<Wrapping<u128>>>::Output
impl Sub<Wrapping<isize>> for Wrapping<isize>[src]
type Output = Wrapping<isize>
The resulting type after applying the - operator.
fn sub(self, other: Wrapping<isize>) -> Wrapping<isize>[src]
impl<'a> Sub<Wrapping<isize>> for &'a Wrapping<isize>1.14.0[src]
type Output = <Wrapping<isize> as Sub<Wrapping<isize>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: Wrapping<isize>
) -> <Wrapping<isize> as Sub<Wrapping<isize>>>::Output[src]
self,
other: Wrapping<isize>
) -> <Wrapping<isize> as Sub<Wrapping<isize>>>::Output
impl<'_> Sub<&'_ Wrapping<isize>> for Wrapping<isize>1.14.0[src]
type Output = <Wrapping<isize> as Sub<Wrapping<isize>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as Sub<Wrapping<isize>>>::Output[src]
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as Sub<Wrapping<isize>>>::Output
impl<'_, '_> Sub<&'_ Wrapping<isize>> for &'_ Wrapping<isize>1.14.0[src]
type Output = <Wrapping<isize> as Sub<Wrapping<isize>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as Sub<Wrapping<isize>>>::Output[src]
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as Sub<Wrapping<isize>>>::Output
impl Sub<Wrapping<i8>> for Wrapping<i8>[src]
type Output = Wrapping<i8>
The resulting type after applying the - operator.
fn sub(self, other: Wrapping<i8>) -> Wrapping<i8>[src]
impl<'a> Sub<Wrapping<i8>> for &'a Wrapping<i8>1.14.0[src]
type Output = <Wrapping<i8> as Sub<Wrapping<i8>>>::Output
The resulting type after applying the - operator.
fn sub(self, other: Wrapping<i8>) -> <Wrapping<i8> as Sub<Wrapping<i8>>>::Output[src]
impl<'_> Sub<&'_ Wrapping<i8>> for Wrapping<i8>1.14.0[src]
type Output = <Wrapping<i8> as Sub<Wrapping<i8>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as Sub<Wrapping<i8>>>::Output[src]
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as Sub<Wrapping<i8>>>::Output
impl<'_, '_> Sub<&'_ Wrapping<i8>> for &'_ Wrapping<i8>1.14.0[src]
type Output = <Wrapping<i8> as Sub<Wrapping<i8>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as Sub<Wrapping<i8>>>::Output[src]
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as Sub<Wrapping<i8>>>::Output
impl Sub<Wrapping<i16>> for Wrapping<i16>[src]
type Output = Wrapping<i16>
The resulting type after applying the - operator.
fn sub(self, other: Wrapping<i16>) -> Wrapping<i16>[src]
impl<'a> Sub<Wrapping<i16>> for &'a Wrapping<i16>1.14.0[src]
type Output = <Wrapping<i16> as Sub<Wrapping<i16>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: Wrapping<i16>
) -> <Wrapping<i16> as Sub<Wrapping<i16>>>::Output[src]
self,
other: Wrapping<i16>
) -> <Wrapping<i16> as Sub<Wrapping<i16>>>::Output
impl<'_> Sub<&'_ Wrapping<i16>> for Wrapping<i16>1.14.0[src]
type Output = <Wrapping<i16> as Sub<Wrapping<i16>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as Sub<Wrapping<i16>>>::Output[src]
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as Sub<Wrapping<i16>>>::Output
impl<'_, '_> Sub<&'_ Wrapping<i16>> for &'_ Wrapping<i16>1.14.0[src]
type Output = <Wrapping<i16> as Sub<Wrapping<i16>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as Sub<Wrapping<i16>>>::Output[src]
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as Sub<Wrapping<i16>>>::Output
impl Sub<Wrapping<i32>> for Wrapping<i32>[src]
type Output = Wrapping<i32>
The resulting type after applying the - operator.
fn sub(self, other: Wrapping<i32>) -> Wrapping<i32>[src]
impl<'a> Sub<Wrapping<i32>> for &'a Wrapping<i32>1.14.0[src]
type Output = <Wrapping<i32> as Sub<Wrapping<i32>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: Wrapping<i32>
) -> <Wrapping<i32> as Sub<Wrapping<i32>>>::Output[src]
self,
other: Wrapping<i32>
) -> <Wrapping<i32> as Sub<Wrapping<i32>>>::Output
impl<'_> Sub<&'_ Wrapping<i32>> for Wrapping<i32>1.14.0[src]
type Output = <Wrapping<i32> as Sub<Wrapping<i32>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as Sub<Wrapping<i32>>>::Output[src]
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as Sub<Wrapping<i32>>>::Output
impl<'_, '_> Sub<&'_ Wrapping<i32>> for &'_ Wrapping<i32>1.14.0[src]
type Output = <Wrapping<i32> as Sub<Wrapping<i32>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as Sub<Wrapping<i32>>>::Output[src]
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as Sub<Wrapping<i32>>>::Output
impl Sub<Wrapping<i64>> for Wrapping<i64>[src]
type Output = Wrapping<i64>
The resulting type after applying the - operator.
fn sub(self, other: Wrapping<i64>) -> Wrapping<i64>[src]
impl<'a> Sub<Wrapping<i64>> for &'a Wrapping<i64>1.14.0[src]
type Output = <Wrapping<i64> as Sub<Wrapping<i64>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: Wrapping<i64>
) -> <Wrapping<i64> as Sub<Wrapping<i64>>>::Output[src]
self,
other: Wrapping<i64>
) -> <Wrapping<i64> as Sub<Wrapping<i64>>>::Output
impl<'_> Sub<&'_ Wrapping<i64>> for Wrapping<i64>1.14.0[src]
type Output = <Wrapping<i64> as Sub<Wrapping<i64>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as Sub<Wrapping<i64>>>::Output[src]
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as Sub<Wrapping<i64>>>::Output
impl<'_, '_> Sub<&'_ Wrapping<i64>> for &'_ Wrapping<i64>1.14.0[src]
type Output = <Wrapping<i64> as Sub<Wrapping<i64>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as Sub<Wrapping<i64>>>::Output[src]
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as Sub<Wrapping<i64>>>::Output
impl Sub<Wrapping<i128>> for Wrapping<i128>[src]
type Output = Wrapping<i128>
The resulting type after applying the - operator.
fn sub(self, other: Wrapping<i128>) -> Wrapping<i128>[src]
impl<'a> Sub<Wrapping<i128>> for &'a Wrapping<i128>1.14.0[src]
type Output = <Wrapping<i128> as Sub<Wrapping<i128>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: Wrapping<i128>
) -> <Wrapping<i128> as Sub<Wrapping<i128>>>::Output[src]
self,
other: Wrapping<i128>
) -> <Wrapping<i128> as Sub<Wrapping<i128>>>::Output
impl<'_> Sub<&'_ Wrapping<i128>> for Wrapping<i128>1.14.0[src]
type Output = <Wrapping<i128> as Sub<Wrapping<i128>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as Sub<Wrapping<i128>>>::Output[src]
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as Sub<Wrapping<i128>>>::Output
impl<'_, '_> Sub<&'_ Wrapping<i128>> for &'_ Wrapping<i128>1.14.0[src]
type Output = <Wrapping<i128> as Sub<Wrapping<i128>>>::Output
The resulting type after applying the - operator.
fn sub(
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as Sub<Wrapping<i128>>>::Output[src]
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as Sub<Wrapping<i128>>>::Output
impl Mul<Wrapping<usize>> for Wrapping<usize>[src]
type Output = Wrapping<usize>
The resulting type after applying the * operator.
fn mul(self, other: Wrapping<usize>) -> Wrapping<usize>[src]
impl<'a> Mul<Wrapping<usize>> for &'a Wrapping<usize>1.14.0[src]
type Output = <Wrapping<usize> as Mul<Wrapping<usize>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: Wrapping<usize>
) -> <Wrapping<usize> as Mul<Wrapping<usize>>>::Output[src]
self,
other: Wrapping<usize>
) -> <Wrapping<usize> as Mul<Wrapping<usize>>>::Output
impl<'_> Mul<&'_ Wrapping<usize>> for Wrapping<usize>1.14.0[src]
type Output = <Wrapping<usize> as Mul<Wrapping<usize>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as Mul<Wrapping<usize>>>::Output[src]
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as Mul<Wrapping<usize>>>::Output
impl<'_, '_> Mul<&'_ Wrapping<usize>> for &'_ Wrapping<usize>1.14.0[src]
type Output = <Wrapping<usize> as Mul<Wrapping<usize>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as Mul<Wrapping<usize>>>::Output[src]
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as Mul<Wrapping<usize>>>::Output
impl Mul<Wrapping<u8>> for Wrapping<u8>[src]
type Output = Wrapping<u8>
The resulting type after applying the * operator.
fn mul(self, other: Wrapping<u8>) -> Wrapping<u8>[src]
impl<'a> Mul<Wrapping<u8>> for &'a Wrapping<u8>1.14.0[src]
type Output = <Wrapping<u8> as Mul<Wrapping<u8>>>::Output
The resulting type after applying the * operator.
fn mul(self, other: Wrapping<u8>) -> <Wrapping<u8> as Mul<Wrapping<u8>>>::Output[src]
impl<'_> Mul<&'_ Wrapping<u8>> for Wrapping<u8>1.14.0[src]
type Output = <Wrapping<u8> as Mul<Wrapping<u8>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as Mul<Wrapping<u8>>>::Output[src]
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as Mul<Wrapping<u8>>>::Output
impl<'_, '_> Mul<&'_ Wrapping<u8>> for &'_ Wrapping<u8>1.14.0[src]
type Output = <Wrapping<u8> as Mul<Wrapping<u8>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as Mul<Wrapping<u8>>>::Output[src]
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as Mul<Wrapping<u8>>>::Output
impl Mul<Wrapping<u16>> for Wrapping<u16>[src]
type Output = Wrapping<u16>
The resulting type after applying the * operator.
fn mul(self, other: Wrapping<u16>) -> Wrapping<u16>[src]
impl<'a> Mul<Wrapping<u16>> for &'a Wrapping<u16>1.14.0[src]
type Output = <Wrapping<u16> as Mul<Wrapping<u16>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: Wrapping<u16>
) -> <Wrapping<u16> as Mul<Wrapping<u16>>>::Output[src]
self,
other: Wrapping<u16>
) -> <Wrapping<u16> as Mul<Wrapping<u16>>>::Output
impl<'_> Mul<&'_ Wrapping<u16>> for Wrapping<u16>1.14.0[src]
type Output = <Wrapping<u16> as Mul<Wrapping<u16>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as Mul<Wrapping<u16>>>::Output[src]
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as Mul<Wrapping<u16>>>::Output
impl<'_, '_> Mul<&'_ Wrapping<u16>> for &'_ Wrapping<u16>1.14.0[src]
type Output = <Wrapping<u16> as Mul<Wrapping<u16>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as Mul<Wrapping<u16>>>::Output[src]
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as Mul<Wrapping<u16>>>::Output
impl Mul<Wrapping<u32>> for Wrapping<u32>[src]
type Output = Wrapping<u32>
The resulting type after applying the * operator.
fn mul(self, other: Wrapping<u32>) -> Wrapping<u32>[src]
impl<'a> Mul<Wrapping<u32>> for &'a Wrapping<u32>1.14.0[src]
type Output = <Wrapping<u32> as Mul<Wrapping<u32>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: Wrapping<u32>
) -> <Wrapping<u32> as Mul<Wrapping<u32>>>::Output[src]
self,
other: Wrapping<u32>
) -> <Wrapping<u32> as Mul<Wrapping<u32>>>::Output
impl<'_> Mul<&'_ Wrapping<u32>> for Wrapping<u32>1.14.0[src]
type Output = <Wrapping<u32> as Mul<Wrapping<u32>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as Mul<Wrapping<u32>>>::Output[src]
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as Mul<Wrapping<u32>>>::Output
impl<'_, '_> Mul<&'_ Wrapping<u32>> for &'_ Wrapping<u32>1.14.0[src]
type Output = <Wrapping<u32> as Mul<Wrapping<u32>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as Mul<Wrapping<u32>>>::Output[src]
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as Mul<Wrapping<u32>>>::Output
impl Mul<Wrapping<u64>> for Wrapping<u64>[src]
type Output = Wrapping<u64>
The resulting type after applying the * operator.
fn mul(self, other: Wrapping<u64>) -> Wrapping<u64>[src]
impl<'a> Mul<Wrapping<u64>> for &'a Wrapping<u64>1.14.0[src]
type Output = <Wrapping<u64> as Mul<Wrapping<u64>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: Wrapping<u64>
) -> <Wrapping<u64> as Mul<Wrapping<u64>>>::Output[src]
self,
other: Wrapping<u64>
) -> <Wrapping<u64> as Mul<Wrapping<u64>>>::Output
impl<'_> Mul<&'_ Wrapping<u64>> for Wrapping<u64>1.14.0[src]
type Output = <Wrapping<u64> as Mul<Wrapping<u64>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as Mul<Wrapping<u64>>>::Output[src]
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as Mul<Wrapping<u64>>>::Output
impl<'_, '_> Mul<&'_ Wrapping<u64>> for &'_ Wrapping<u64>1.14.0[src]
type Output = <Wrapping<u64> as Mul<Wrapping<u64>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as Mul<Wrapping<u64>>>::Output[src]
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as Mul<Wrapping<u64>>>::Output
impl Mul<Wrapping<u128>> for Wrapping<u128>[src]
type Output = Wrapping<u128>
The resulting type after applying the * operator.
fn mul(self, other: Wrapping<u128>) -> Wrapping<u128>[src]
impl<'a> Mul<Wrapping<u128>> for &'a Wrapping<u128>1.14.0[src]
type Output = <Wrapping<u128> as Mul<Wrapping<u128>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: Wrapping<u128>
) -> <Wrapping<u128> as Mul<Wrapping<u128>>>::Output[src]
self,
other: Wrapping<u128>
) -> <Wrapping<u128> as Mul<Wrapping<u128>>>::Output
impl<'_> Mul<&'_ Wrapping<u128>> for Wrapping<u128>1.14.0[src]
type Output = <Wrapping<u128> as Mul<Wrapping<u128>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as Mul<Wrapping<u128>>>::Output[src]
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as Mul<Wrapping<u128>>>::Output
impl<'_, '_> Mul<&'_ Wrapping<u128>> for &'_ Wrapping<u128>1.14.0[src]
type Output = <Wrapping<u128> as Mul<Wrapping<u128>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as Mul<Wrapping<u128>>>::Output[src]
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as Mul<Wrapping<u128>>>::Output
impl Mul<Wrapping<isize>> for Wrapping<isize>[src]
type Output = Wrapping<isize>
The resulting type after applying the * operator.
fn mul(self, other: Wrapping<isize>) -> Wrapping<isize>[src]
impl<'a> Mul<Wrapping<isize>> for &'a Wrapping<isize>1.14.0[src]
type Output = <Wrapping<isize> as Mul<Wrapping<isize>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: Wrapping<isize>
) -> <Wrapping<isize> as Mul<Wrapping<isize>>>::Output[src]
self,
other: Wrapping<isize>
) -> <Wrapping<isize> as Mul<Wrapping<isize>>>::Output
impl<'_> Mul<&'_ Wrapping<isize>> for Wrapping<isize>1.14.0[src]
type Output = <Wrapping<isize> as Mul<Wrapping<isize>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as Mul<Wrapping<isize>>>::Output[src]
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as Mul<Wrapping<isize>>>::Output
impl<'_, '_> Mul<&'_ Wrapping<isize>> for &'_ Wrapping<isize>1.14.0[src]
type Output = <Wrapping<isize> as Mul<Wrapping<isize>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as Mul<Wrapping<isize>>>::Output[src]
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as Mul<Wrapping<isize>>>::Output
impl Mul<Wrapping<i8>> for Wrapping<i8>[src]
type Output = Wrapping<i8>
The resulting type after applying the * operator.
fn mul(self, other: Wrapping<i8>) -> Wrapping<i8>[src]
impl<'a> Mul<Wrapping<i8>> for &'a Wrapping<i8>1.14.0[src]
type Output = <Wrapping<i8> as Mul<Wrapping<i8>>>::Output
The resulting type after applying the * operator.
fn mul(self, other: Wrapping<i8>) -> <Wrapping<i8> as Mul<Wrapping<i8>>>::Output[src]
impl<'_> Mul<&'_ Wrapping<i8>> for Wrapping<i8>1.14.0[src]
type Output = <Wrapping<i8> as Mul<Wrapping<i8>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as Mul<Wrapping<i8>>>::Output[src]
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as Mul<Wrapping<i8>>>::Output
impl<'_, '_> Mul<&'_ Wrapping<i8>> for &'_ Wrapping<i8>1.14.0[src]
type Output = <Wrapping<i8> as Mul<Wrapping<i8>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as Mul<Wrapping<i8>>>::Output[src]
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as Mul<Wrapping<i8>>>::Output
impl Mul<Wrapping<i16>> for Wrapping<i16>[src]
type Output = Wrapping<i16>
The resulting type after applying the * operator.
fn mul(self, other: Wrapping<i16>) -> Wrapping<i16>[src]
impl<'a> Mul<Wrapping<i16>> for &'a Wrapping<i16>1.14.0[src]
type Output = <Wrapping<i16> as Mul<Wrapping<i16>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: Wrapping<i16>
) -> <Wrapping<i16> as Mul<Wrapping<i16>>>::Output[src]
self,
other: Wrapping<i16>
) -> <Wrapping<i16> as Mul<Wrapping<i16>>>::Output
impl<'_> Mul<&'_ Wrapping<i16>> for Wrapping<i16>1.14.0[src]
type Output = <Wrapping<i16> as Mul<Wrapping<i16>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as Mul<Wrapping<i16>>>::Output[src]
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as Mul<Wrapping<i16>>>::Output
impl<'_, '_> Mul<&'_ Wrapping<i16>> for &'_ Wrapping<i16>1.14.0[src]
type Output = <Wrapping<i16> as Mul<Wrapping<i16>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as Mul<Wrapping<i16>>>::Output[src]
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as Mul<Wrapping<i16>>>::Output
impl Mul<Wrapping<i32>> for Wrapping<i32>[src]
type Output = Wrapping<i32>
The resulting type after applying the * operator.
fn mul(self, other: Wrapping<i32>) -> Wrapping<i32>[src]
impl<'a> Mul<Wrapping<i32>> for &'a Wrapping<i32>1.14.0[src]
type Output = <Wrapping<i32> as Mul<Wrapping<i32>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: Wrapping<i32>
) -> <Wrapping<i32> as Mul<Wrapping<i32>>>::Output[src]
self,
other: Wrapping<i32>
) -> <Wrapping<i32> as Mul<Wrapping<i32>>>::Output
impl<'_> Mul<&'_ Wrapping<i32>> for Wrapping<i32>1.14.0[src]
type Output = <Wrapping<i32> as Mul<Wrapping<i32>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as Mul<Wrapping<i32>>>::Output[src]
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as Mul<Wrapping<i32>>>::Output
impl<'_, '_> Mul<&'_ Wrapping<i32>> for &'_ Wrapping<i32>1.14.0[src]
type Output = <Wrapping<i32> as Mul<Wrapping<i32>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as Mul<Wrapping<i32>>>::Output[src]
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as Mul<Wrapping<i32>>>::Output
impl Mul<Wrapping<i64>> for Wrapping<i64>[src]
type Output = Wrapping<i64>
The resulting type after applying the * operator.
fn mul(self, other: Wrapping<i64>) -> Wrapping<i64>[src]
impl<'a> Mul<Wrapping<i64>> for &'a Wrapping<i64>1.14.0[src]
type Output = <Wrapping<i64> as Mul<Wrapping<i64>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: Wrapping<i64>
) -> <Wrapping<i64> as Mul<Wrapping<i64>>>::Output[src]
self,
other: Wrapping<i64>
) -> <Wrapping<i64> as Mul<Wrapping<i64>>>::Output
impl<'_> Mul<&'_ Wrapping<i64>> for Wrapping<i64>1.14.0[src]
type Output = <Wrapping<i64> as Mul<Wrapping<i64>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as Mul<Wrapping<i64>>>::Output[src]
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as Mul<Wrapping<i64>>>::Output
impl<'_, '_> Mul<&'_ Wrapping<i64>> for &'_ Wrapping<i64>1.14.0[src]
type Output = <Wrapping<i64> as Mul<Wrapping<i64>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as Mul<Wrapping<i64>>>::Output[src]
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as Mul<Wrapping<i64>>>::Output
impl Mul<Wrapping<i128>> for Wrapping<i128>[src]
type Output = Wrapping<i128>
The resulting type after applying the * operator.
fn mul(self, other: Wrapping<i128>) -> Wrapping<i128>[src]
impl<'a> Mul<Wrapping<i128>> for &'a Wrapping<i128>1.14.0[src]
type Output = <Wrapping<i128> as Mul<Wrapping<i128>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: Wrapping<i128>
) -> <Wrapping<i128> as Mul<Wrapping<i128>>>::Output[src]
self,
other: Wrapping<i128>
) -> <Wrapping<i128> as Mul<Wrapping<i128>>>::Output
impl<'_> Mul<&'_ Wrapping<i128>> for Wrapping<i128>1.14.0[src]
type Output = <Wrapping<i128> as Mul<Wrapping<i128>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as Mul<Wrapping<i128>>>::Output[src]
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as Mul<Wrapping<i128>>>::Output
impl<'_, '_> Mul<&'_ Wrapping<i128>> for &'_ Wrapping<i128>1.14.0[src]
type Output = <Wrapping<i128> as Mul<Wrapping<i128>>>::Output
The resulting type after applying the * operator.
fn mul(
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as Mul<Wrapping<i128>>>::Output[src]
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as Mul<Wrapping<i128>>>::Output
impl Div<Wrapping<usize>> for Wrapping<usize>1.3.0[src]
type Output = Wrapping<usize>
The resulting type after applying the / operator.
fn div(self, other: Wrapping<usize>) -> Wrapping<usize>[src]
impl<'a> Div<Wrapping<usize>> for &'a Wrapping<usize>1.14.0[src]
type Output = <Wrapping<usize> as Div<Wrapping<usize>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: Wrapping<usize>
) -> <Wrapping<usize> as Div<Wrapping<usize>>>::Output[src]
self,
other: Wrapping<usize>
) -> <Wrapping<usize> as Div<Wrapping<usize>>>::Output
impl<'_> Div<&'_ Wrapping<usize>> for Wrapping<usize>1.14.0[src]
type Output = <Wrapping<usize> as Div<Wrapping<usize>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as Div<Wrapping<usize>>>::Output[src]
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as Div<Wrapping<usize>>>::Output
impl<'_, '_> Div<&'_ Wrapping<usize>> for &'_ Wrapping<usize>1.14.0[src]
type Output = <Wrapping<usize> as Div<Wrapping<usize>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as Div<Wrapping<usize>>>::Output[src]
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as Div<Wrapping<usize>>>::Output
impl Div<Wrapping<u8>> for Wrapping<u8>1.3.0[src]
type Output = Wrapping<u8>
The resulting type after applying the / operator.
fn div(self, other: Wrapping<u8>) -> Wrapping<u8>[src]
impl<'a> Div<Wrapping<u8>> for &'a Wrapping<u8>1.14.0[src]
type Output = <Wrapping<u8> as Div<Wrapping<u8>>>::Output
The resulting type after applying the / operator.
fn div(self, other: Wrapping<u8>) -> <Wrapping<u8> as Div<Wrapping<u8>>>::Output[src]
impl<'_> Div<&'_ Wrapping<u8>> for Wrapping<u8>1.14.0[src]
type Output = <Wrapping<u8> as Div<Wrapping<u8>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as Div<Wrapping<u8>>>::Output[src]
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as Div<Wrapping<u8>>>::Output
impl<'_, '_> Div<&'_ Wrapping<u8>> for &'_ Wrapping<u8>1.14.0[src]
type Output = <Wrapping<u8> as Div<Wrapping<u8>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as Div<Wrapping<u8>>>::Output[src]
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as Div<Wrapping<u8>>>::Output
impl Div<Wrapping<u16>> for Wrapping<u16>1.3.0[src]
type Output = Wrapping<u16>
The resulting type after applying the / operator.
fn div(self, other: Wrapping<u16>) -> Wrapping<u16>[src]
impl<'a> Div<Wrapping<u16>> for &'a Wrapping<u16>1.14.0[src]
type Output = <Wrapping<u16> as Div<Wrapping<u16>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: Wrapping<u16>
) -> <Wrapping<u16> as Div<Wrapping<u16>>>::Output[src]
self,
other: Wrapping<u16>
) -> <Wrapping<u16> as Div<Wrapping<u16>>>::Output
impl<'_> Div<&'_ Wrapping<u16>> for Wrapping<u16>1.14.0[src]
type Output = <Wrapping<u16> as Div<Wrapping<u16>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as Div<Wrapping<u16>>>::Output[src]
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as Div<Wrapping<u16>>>::Output
impl<'_, '_> Div<&'_ Wrapping<u16>> for &'_ Wrapping<u16>1.14.0[src]
type Output = <Wrapping<u16> as Div<Wrapping<u16>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as Div<Wrapping<u16>>>::Output[src]
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as Div<Wrapping<u16>>>::Output
impl Div<Wrapping<u32>> for Wrapping<u32>1.3.0[src]
type Output = Wrapping<u32>
The resulting type after applying the / operator.
fn div(self, other: Wrapping<u32>) -> Wrapping<u32>[src]
impl<'a> Div<Wrapping<u32>> for &'a Wrapping<u32>1.14.0[src]
type Output = <Wrapping<u32> as Div<Wrapping<u32>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: Wrapping<u32>
) -> <Wrapping<u32> as Div<Wrapping<u32>>>::Output[src]
self,
other: Wrapping<u32>
) -> <Wrapping<u32> as Div<Wrapping<u32>>>::Output
impl<'_> Div<&'_ Wrapping<u32>> for Wrapping<u32>1.14.0[src]
type Output = <Wrapping<u32> as Div<Wrapping<u32>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as Div<Wrapping<u32>>>::Output[src]
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as Div<Wrapping<u32>>>::Output
impl<'_, '_> Div<&'_ Wrapping<u32>> for &'_ Wrapping<u32>1.14.0[src]
type Output = <Wrapping<u32> as Div<Wrapping<u32>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as Div<Wrapping<u32>>>::Output[src]
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as Div<Wrapping<u32>>>::Output
impl Div<Wrapping<u64>> for Wrapping<u64>1.3.0[src]
type Output = Wrapping<u64>
The resulting type after applying the / operator.
fn div(self, other: Wrapping<u64>) -> Wrapping<u64>[src]
impl<'a> Div<Wrapping<u64>> for &'a Wrapping<u64>1.14.0[src]
type Output = <Wrapping<u64> as Div<Wrapping<u64>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: Wrapping<u64>
) -> <Wrapping<u64> as Div<Wrapping<u64>>>::Output[src]
self,
other: Wrapping<u64>
) -> <Wrapping<u64> as Div<Wrapping<u64>>>::Output
impl<'_> Div<&'_ Wrapping<u64>> for Wrapping<u64>1.14.0[src]
type Output = <Wrapping<u64> as Div<Wrapping<u64>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as Div<Wrapping<u64>>>::Output[src]
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as Div<Wrapping<u64>>>::Output
impl<'_, '_> Div<&'_ Wrapping<u64>> for &'_ Wrapping<u64>1.14.0[src]
type Output = <Wrapping<u64> as Div<Wrapping<u64>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as Div<Wrapping<u64>>>::Output[src]
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as Div<Wrapping<u64>>>::Output
impl Div<Wrapping<u128>> for Wrapping<u128>1.3.0[src]
type Output = Wrapping<u128>
The resulting type after applying the / operator.
fn div(self, other: Wrapping<u128>) -> Wrapping<u128>[src]
impl<'a> Div<Wrapping<u128>> for &'a Wrapping<u128>1.14.0[src]
type Output = <Wrapping<u128> as Div<Wrapping<u128>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: Wrapping<u128>
) -> <Wrapping<u128> as Div<Wrapping<u128>>>::Output[src]
self,
other: Wrapping<u128>
) -> <Wrapping<u128> as Div<Wrapping<u128>>>::Output
impl<'_> Div<&'_ Wrapping<u128>> for Wrapping<u128>1.14.0[src]
type Output = <Wrapping<u128> as Div<Wrapping<u128>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as Div<Wrapping<u128>>>::Output[src]
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as Div<Wrapping<u128>>>::Output
impl<'_, '_> Div<&'_ Wrapping<u128>> for &'_ Wrapping<u128>1.14.0[src]
type Output = <Wrapping<u128> as Div<Wrapping<u128>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as Div<Wrapping<u128>>>::Output[src]
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as Div<Wrapping<u128>>>::Output
impl Div<Wrapping<isize>> for Wrapping<isize>1.3.0[src]
type Output = Wrapping<isize>
The resulting type after applying the / operator.
fn div(self, other: Wrapping<isize>) -> Wrapping<isize>[src]
impl<'a> Div<Wrapping<isize>> for &'a Wrapping<isize>1.14.0[src]
type Output = <Wrapping<isize> as Div<Wrapping<isize>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: Wrapping<isize>
) -> <Wrapping<isize> as Div<Wrapping<isize>>>::Output[src]
self,
other: Wrapping<isize>
) -> <Wrapping<isize> as Div<Wrapping<isize>>>::Output
impl<'_> Div<&'_ Wrapping<isize>> for Wrapping<isize>1.14.0[src]
type Output = <Wrapping<isize> as Div<Wrapping<isize>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as Div<Wrapping<isize>>>::Output[src]
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as Div<Wrapping<isize>>>::Output
impl<'_, '_> Div<&'_ Wrapping<isize>> for &'_ Wrapping<isize>1.14.0[src]
type Output = <Wrapping<isize> as Div<Wrapping<isize>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as Div<Wrapping<isize>>>::Output[src]
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as Div<Wrapping<isize>>>::Output
impl Div<Wrapping<i8>> for Wrapping<i8>1.3.0[src]
type Output = Wrapping<i8>
The resulting type after applying the / operator.
fn div(self, other: Wrapping<i8>) -> Wrapping<i8>[src]
impl<'a> Div<Wrapping<i8>> for &'a Wrapping<i8>1.14.0[src]
type Output = <Wrapping<i8> as Div<Wrapping<i8>>>::Output
The resulting type after applying the / operator.
fn div(self, other: Wrapping<i8>) -> <Wrapping<i8> as Div<Wrapping<i8>>>::Output[src]
impl<'_> Div<&'_ Wrapping<i8>> for Wrapping<i8>1.14.0[src]
type Output = <Wrapping<i8> as Div<Wrapping<i8>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as Div<Wrapping<i8>>>::Output[src]
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as Div<Wrapping<i8>>>::Output
impl<'_, '_> Div<&'_ Wrapping<i8>> for &'_ Wrapping<i8>1.14.0[src]
type Output = <Wrapping<i8> as Div<Wrapping<i8>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as Div<Wrapping<i8>>>::Output[src]
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as Div<Wrapping<i8>>>::Output
impl Div<Wrapping<i16>> for Wrapping<i16>1.3.0[src]
type Output = Wrapping<i16>
The resulting type after applying the / operator.
fn div(self, other: Wrapping<i16>) -> Wrapping<i16>[src]
impl<'a> Div<Wrapping<i16>> for &'a Wrapping<i16>1.14.0[src]
type Output = <Wrapping<i16> as Div<Wrapping<i16>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: Wrapping<i16>
) -> <Wrapping<i16> as Div<Wrapping<i16>>>::Output[src]
self,
other: Wrapping<i16>
) -> <Wrapping<i16> as Div<Wrapping<i16>>>::Output
impl<'_> Div<&'_ Wrapping<i16>> for Wrapping<i16>1.14.0[src]
type Output = <Wrapping<i16> as Div<Wrapping<i16>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as Div<Wrapping<i16>>>::Output[src]
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as Div<Wrapping<i16>>>::Output
impl<'_, '_> Div<&'_ Wrapping<i16>> for &'_ Wrapping<i16>1.14.0[src]
type Output = <Wrapping<i16> as Div<Wrapping<i16>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as Div<Wrapping<i16>>>::Output[src]
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as Div<Wrapping<i16>>>::Output
impl Div<Wrapping<i32>> for Wrapping<i32>1.3.0[src]
type Output = Wrapping<i32>
The resulting type after applying the / operator.
fn div(self, other: Wrapping<i32>) -> Wrapping<i32>[src]
impl<'a> Div<Wrapping<i32>> for &'a Wrapping<i32>1.14.0[src]
type Output = <Wrapping<i32> as Div<Wrapping<i32>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: Wrapping<i32>
) -> <Wrapping<i32> as Div<Wrapping<i32>>>::Output[src]
self,
other: Wrapping<i32>
) -> <Wrapping<i32> as Div<Wrapping<i32>>>::Output
impl<'_> Div<&'_ Wrapping<i32>> for Wrapping<i32>1.14.0[src]
type Output = <Wrapping<i32> as Div<Wrapping<i32>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as Div<Wrapping<i32>>>::Output[src]
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as Div<Wrapping<i32>>>::Output
impl<'_, '_> Div<&'_ Wrapping<i32>> for &'_ Wrapping<i32>1.14.0[src]
type Output = <Wrapping<i32> as Div<Wrapping<i32>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as Div<Wrapping<i32>>>::Output[src]
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as Div<Wrapping<i32>>>::Output
impl Div<Wrapping<i64>> for Wrapping<i64>1.3.0[src]
type Output = Wrapping<i64>
The resulting type after applying the / operator.
fn div(self, other: Wrapping<i64>) -> Wrapping<i64>[src]
impl<'a> Div<Wrapping<i64>> for &'a Wrapping<i64>1.14.0[src]
type Output = <Wrapping<i64> as Div<Wrapping<i64>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: Wrapping<i64>
) -> <Wrapping<i64> as Div<Wrapping<i64>>>::Output[src]
self,
other: Wrapping<i64>
) -> <Wrapping<i64> as Div<Wrapping<i64>>>::Output
impl<'_> Div<&'_ Wrapping<i64>> for Wrapping<i64>1.14.0[src]
type Output = <Wrapping<i64> as Div<Wrapping<i64>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as Div<Wrapping<i64>>>::Output[src]
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as Div<Wrapping<i64>>>::Output
impl<'_, '_> Div<&'_ Wrapping<i64>> for &'_ Wrapping<i64>1.14.0[src]
type Output = <Wrapping<i64> as Div<Wrapping<i64>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as Div<Wrapping<i64>>>::Output[src]
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as Div<Wrapping<i64>>>::Output
impl Div<Wrapping<i128>> for Wrapping<i128>1.3.0[src]
type Output = Wrapping<i128>
The resulting type after applying the / operator.
fn div(self, other: Wrapping<i128>) -> Wrapping<i128>[src]
impl<'a> Div<Wrapping<i128>> for &'a Wrapping<i128>1.14.0[src]
type Output = <Wrapping<i128> as Div<Wrapping<i128>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: Wrapping<i128>
) -> <Wrapping<i128> as Div<Wrapping<i128>>>::Output[src]
self,
other: Wrapping<i128>
) -> <Wrapping<i128> as Div<Wrapping<i128>>>::Output
impl<'_> Div<&'_ Wrapping<i128>> for Wrapping<i128>1.14.0[src]
type Output = <Wrapping<i128> as Div<Wrapping<i128>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as Div<Wrapping<i128>>>::Output[src]
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as Div<Wrapping<i128>>>::Output
impl<'_, '_> Div<&'_ Wrapping<i128>> for &'_ Wrapping<i128>1.14.0[src]
type Output = <Wrapping<i128> as Div<Wrapping<i128>>>::Output
The resulting type after applying the / operator.
fn div(
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as Div<Wrapping<i128>>>::Output[src]
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as Div<Wrapping<i128>>>::Output
impl Rem<Wrapping<usize>> for Wrapping<usize>1.7.0[src]
type Output = Wrapping<usize>
The resulting type after applying the % operator.
fn rem(self, other: Wrapping<usize>) -> Wrapping<usize>[src]
impl<'a> Rem<Wrapping<usize>> for &'a Wrapping<usize>1.14.0[src]
type Output = <Wrapping<usize> as Rem<Wrapping<usize>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: Wrapping<usize>
) -> <Wrapping<usize> as Rem<Wrapping<usize>>>::Output[src]
self,
other: Wrapping<usize>
) -> <Wrapping<usize> as Rem<Wrapping<usize>>>::Output
impl<'_> Rem<&'_ Wrapping<usize>> for Wrapping<usize>1.14.0[src]
type Output = <Wrapping<usize> as Rem<Wrapping<usize>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as Rem<Wrapping<usize>>>::Output[src]
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as Rem<Wrapping<usize>>>::Output
impl<'_, '_> Rem<&'_ Wrapping<usize>> for &'_ Wrapping<usize>1.14.0[src]
type Output = <Wrapping<usize> as Rem<Wrapping<usize>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as Rem<Wrapping<usize>>>::Output[src]
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as Rem<Wrapping<usize>>>::Output
impl Rem<Wrapping<u8>> for Wrapping<u8>1.7.0[src]
type Output = Wrapping<u8>
The resulting type after applying the % operator.
fn rem(self, other: Wrapping<u8>) -> Wrapping<u8>[src]
impl<'a> Rem<Wrapping<u8>> for &'a Wrapping<u8>1.14.0[src]
type Output = <Wrapping<u8> as Rem<Wrapping<u8>>>::Output
The resulting type after applying the % operator.
fn rem(self, other: Wrapping<u8>) -> <Wrapping<u8> as Rem<Wrapping<u8>>>::Output[src]
impl<'_> Rem<&'_ Wrapping<u8>> for Wrapping<u8>1.14.0[src]
type Output = <Wrapping<u8> as Rem<Wrapping<u8>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as Rem<Wrapping<u8>>>::Output[src]
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as Rem<Wrapping<u8>>>::Output
impl<'_, '_> Rem<&'_ Wrapping<u8>> for &'_ Wrapping<u8>1.14.0[src]
type Output = <Wrapping<u8> as Rem<Wrapping<u8>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as Rem<Wrapping<u8>>>::Output[src]
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as Rem<Wrapping<u8>>>::Output
impl Rem<Wrapping<u16>> for Wrapping<u16>1.7.0[src]
type Output = Wrapping<u16>
The resulting type after applying the % operator.
fn rem(self, other: Wrapping<u16>) -> Wrapping<u16>[src]
impl<'a> Rem<Wrapping<u16>> for &'a Wrapping<u16>1.14.0[src]
type Output = <Wrapping<u16> as Rem<Wrapping<u16>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: Wrapping<u16>
) -> <Wrapping<u16> as Rem<Wrapping<u16>>>::Output[src]
self,
other: Wrapping<u16>
) -> <Wrapping<u16> as Rem<Wrapping<u16>>>::Output
impl<'_> Rem<&'_ Wrapping<u16>> for Wrapping<u16>1.14.0[src]
type Output = <Wrapping<u16> as Rem<Wrapping<u16>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as Rem<Wrapping<u16>>>::Output[src]
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as Rem<Wrapping<u16>>>::Output
impl<'_, '_> Rem<&'_ Wrapping<u16>> for &'_ Wrapping<u16>1.14.0[src]
type Output = <Wrapping<u16> as Rem<Wrapping<u16>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as Rem<Wrapping<u16>>>::Output[src]
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as Rem<Wrapping<u16>>>::Output
impl Rem<Wrapping<u32>> for Wrapping<u32>1.7.0[src]
type Output = Wrapping<u32>
The resulting type after applying the % operator.
fn rem(self, other: Wrapping<u32>) -> Wrapping<u32>[src]
impl<'a> Rem<Wrapping<u32>> for &'a Wrapping<u32>1.14.0[src]
type Output = <Wrapping<u32> as Rem<Wrapping<u32>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: Wrapping<u32>
) -> <Wrapping<u32> as Rem<Wrapping<u32>>>::Output[src]
self,
other: Wrapping<u32>
) -> <Wrapping<u32> as Rem<Wrapping<u32>>>::Output
impl<'_> Rem<&'_ Wrapping<u32>> for Wrapping<u32>1.14.0[src]
type Output = <Wrapping<u32> as Rem<Wrapping<u32>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as Rem<Wrapping<u32>>>::Output[src]
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as Rem<Wrapping<u32>>>::Output
impl<'_, '_> Rem<&'_ Wrapping<u32>> for &'_ Wrapping<u32>1.14.0[src]
type Output = <Wrapping<u32> as Rem<Wrapping<u32>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as Rem<Wrapping<u32>>>::Output[src]
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as Rem<Wrapping<u32>>>::Output
impl Rem<Wrapping<u64>> for Wrapping<u64>1.7.0[src]
type Output = Wrapping<u64>
The resulting type after applying the % operator.
fn rem(self, other: Wrapping<u64>) -> Wrapping<u64>[src]
impl<'a> Rem<Wrapping<u64>> for &'a Wrapping<u64>1.14.0[src]
type Output = <Wrapping<u64> as Rem<Wrapping<u64>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: Wrapping<u64>
) -> <Wrapping<u64> as Rem<Wrapping<u64>>>::Output[src]
self,
other: Wrapping<u64>
) -> <Wrapping<u64> as Rem<Wrapping<u64>>>::Output
impl<'_> Rem<&'_ Wrapping<u64>> for Wrapping<u64>1.14.0[src]
type Output = <Wrapping<u64> as Rem<Wrapping<u64>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as Rem<Wrapping<u64>>>::Output[src]
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as Rem<Wrapping<u64>>>::Output
impl<'_, '_> Rem<&'_ Wrapping<u64>> for &'_ Wrapping<u64>1.14.0[src]
type Output = <Wrapping<u64> as Rem<Wrapping<u64>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as Rem<Wrapping<u64>>>::Output[src]
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as Rem<Wrapping<u64>>>::Output
impl Rem<Wrapping<u128>> for Wrapping<u128>1.7.0[src]
type Output = Wrapping<u128>
The resulting type after applying the % operator.
fn rem(self, other: Wrapping<u128>) -> Wrapping<u128>[src]
impl<'a> Rem<Wrapping<u128>> for &'a Wrapping<u128>1.14.0[src]
type Output = <Wrapping<u128> as Rem<Wrapping<u128>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: Wrapping<u128>
) -> <Wrapping<u128> as Rem<Wrapping<u128>>>::Output[src]
self,
other: Wrapping<u128>
) -> <Wrapping<u128> as Rem<Wrapping<u128>>>::Output
impl<'_> Rem<&'_ Wrapping<u128>> for Wrapping<u128>1.14.0[src]
type Output = <Wrapping<u128> as Rem<Wrapping<u128>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as Rem<Wrapping<u128>>>::Output[src]
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as Rem<Wrapping<u128>>>::Output
impl<'_, '_> Rem<&'_ Wrapping<u128>> for &'_ Wrapping<u128>1.14.0[src]
type Output = <Wrapping<u128> as Rem<Wrapping<u128>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as Rem<Wrapping<u128>>>::Output[src]
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as Rem<Wrapping<u128>>>::Output
impl Rem<Wrapping<isize>> for Wrapping<isize>1.7.0[src]
type Output = Wrapping<isize>
The resulting type after applying the % operator.
fn rem(self, other: Wrapping<isize>) -> Wrapping<isize>[src]
impl<'a> Rem<Wrapping<isize>> for &'a Wrapping<isize>1.14.0[src]
type Output = <Wrapping<isize> as Rem<Wrapping<isize>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: Wrapping<isize>
) -> <Wrapping<isize> as Rem<Wrapping<isize>>>::Output[src]
self,
other: Wrapping<isize>
) -> <Wrapping<isize> as Rem<Wrapping<isize>>>::Output
impl<'_> Rem<&'_ Wrapping<isize>> for Wrapping<isize>1.14.0[src]
type Output = <Wrapping<isize> as Rem<Wrapping<isize>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as Rem<Wrapping<isize>>>::Output[src]
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as Rem<Wrapping<isize>>>::Output
impl<'_, '_> Rem<&'_ Wrapping<isize>> for &'_ Wrapping<isize>1.14.0[src]
type Output = <Wrapping<isize> as Rem<Wrapping<isize>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as Rem<Wrapping<isize>>>::Output[src]
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as Rem<Wrapping<isize>>>::Output
impl Rem<Wrapping<i8>> for Wrapping<i8>1.7.0[src]
type Output = Wrapping<i8>
The resulting type after applying the % operator.
fn rem(self, other: Wrapping<i8>) -> Wrapping<i8>[src]
impl<'a> Rem<Wrapping<i8>> for &'a Wrapping<i8>1.14.0[src]
type Output = <Wrapping<i8> as Rem<Wrapping<i8>>>::Output
The resulting type after applying the % operator.
fn rem(self, other: Wrapping<i8>) -> <Wrapping<i8> as Rem<Wrapping<i8>>>::Output[src]
impl<'_> Rem<&'_ Wrapping<i8>> for Wrapping<i8>1.14.0[src]
type Output = <Wrapping<i8> as Rem<Wrapping<i8>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as Rem<Wrapping<i8>>>::Output[src]
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as Rem<Wrapping<i8>>>::Output
impl<'_, '_> Rem<&'_ Wrapping<i8>> for &'_ Wrapping<i8>1.14.0[src]
type Output = <Wrapping<i8> as Rem<Wrapping<i8>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as Rem<Wrapping<i8>>>::Output[src]
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as Rem<Wrapping<i8>>>::Output
impl Rem<Wrapping<i16>> for Wrapping<i16>1.7.0[src]
type Output = Wrapping<i16>
The resulting type after applying the % operator.
fn rem(self, other: Wrapping<i16>) -> Wrapping<i16>[src]
impl<'a> Rem<Wrapping<i16>> for &'a Wrapping<i16>1.14.0[src]
type Output = <Wrapping<i16> as Rem<Wrapping<i16>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: Wrapping<i16>
) -> <Wrapping<i16> as Rem<Wrapping<i16>>>::Output[src]
self,
other: Wrapping<i16>
) -> <Wrapping<i16> as Rem<Wrapping<i16>>>::Output
impl<'_> Rem<&'_ Wrapping<i16>> for Wrapping<i16>1.14.0[src]
type Output = <Wrapping<i16> as Rem<Wrapping<i16>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as Rem<Wrapping<i16>>>::Output[src]
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as Rem<Wrapping<i16>>>::Output
impl<'_, '_> Rem<&'_ Wrapping<i16>> for &'_ Wrapping<i16>1.14.0[src]
type Output = <Wrapping<i16> as Rem<Wrapping<i16>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as Rem<Wrapping<i16>>>::Output[src]
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as Rem<Wrapping<i16>>>::Output
impl Rem<Wrapping<i32>> for Wrapping<i32>1.7.0[src]
type Output = Wrapping<i32>
The resulting type after applying the % operator.
fn rem(self, other: Wrapping<i32>) -> Wrapping<i32>[src]
impl<'a> Rem<Wrapping<i32>> for &'a Wrapping<i32>1.14.0[src]
type Output = <Wrapping<i32> as Rem<Wrapping<i32>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: Wrapping<i32>
) -> <Wrapping<i32> as Rem<Wrapping<i32>>>::Output[src]
self,
other: Wrapping<i32>
) -> <Wrapping<i32> as Rem<Wrapping<i32>>>::Output
impl<'_> Rem<&'_ Wrapping<i32>> for Wrapping<i32>1.14.0[src]
type Output = <Wrapping<i32> as Rem<Wrapping<i32>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as Rem<Wrapping<i32>>>::Output[src]
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as Rem<Wrapping<i32>>>::Output
impl<'_, '_> Rem<&'_ Wrapping<i32>> for &'_ Wrapping<i32>1.14.0[src]
type Output = <Wrapping<i32> as Rem<Wrapping<i32>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as Rem<Wrapping<i32>>>::Output[src]
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as Rem<Wrapping<i32>>>::Output
impl Rem<Wrapping<i64>> for Wrapping<i64>1.7.0[src]
type Output = Wrapping<i64>
The resulting type after applying the % operator.
fn rem(self, other: Wrapping<i64>) -> Wrapping<i64>[src]
impl<'a> Rem<Wrapping<i64>> for &'a Wrapping<i64>1.14.0[src]
type Output = <Wrapping<i64> as Rem<Wrapping<i64>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: Wrapping<i64>
) -> <Wrapping<i64> as Rem<Wrapping<i64>>>::Output[src]
self,
other: Wrapping<i64>
) -> <Wrapping<i64> as Rem<Wrapping<i64>>>::Output
impl<'_> Rem<&'_ Wrapping<i64>> for Wrapping<i64>1.14.0[src]
type Output = <Wrapping<i64> as Rem<Wrapping<i64>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as Rem<Wrapping<i64>>>::Output[src]
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as Rem<Wrapping<i64>>>::Output
impl<'_, '_> Rem<&'_ Wrapping<i64>> for &'_ Wrapping<i64>1.14.0[src]
type Output = <Wrapping<i64> as Rem<Wrapping<i64>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as Rem<Wrapping<i64>>>::Output[src]
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as Rem<Wrapping<i64>>>::Output
impl Rem<Wrapping<i128>> for Wrapping<i128>1.7.0[src]
type Output = Wrapping<i128>
The resulting type after applying the % operator.
fn rem(self, other: Wrapping<i128>) -> Wrapping<i128>[src]
impl<'a> Rem<Wrapping<i128>> for &'a Wrapping<i128>1.14.0[src]
type Output = <Wrapping<i128> as Rem<Wrapping<i128>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: Wrapping<i128>
) -> <Wrapping<i128> as Rem<Wrapping<i128>>>::Output[src]
self,
other: Wrapping<i128>
) -> <Wrapping<i128> as Rem<Wrapping<i128>>>::Output
impl<'_> Rem<&'_ Wrapping<i128>> for Wrapping<i128>1.14.0[src]
type Output = <Wrapping<i128> as Rem<Wrapping<i128>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as Rem<Wrapping<i128>>>::Output[src]
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as Rem<Wrapping<i128>>>::Output
impl<'_, '_> Rem<&'_ Wrapping<i128>> for &'_ Wrapping<i128>1.14.0[src]
type Output = <Wrapping<i128> as Rem<Wrapping<i128>>>::Output
The resulting type after applying the % operator.
fn rem(
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as Rem<Wrapping<i128>>>::Output[src]
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as Rem<Wrapping<i128>>>::Output
impl Neg for Wrapping<usize>1.10.0[src]
impl<'_> Neg for &'_ Wrapping<usize>1.14.0[src]
type Output = <Wrapping<usize> as Neg>::Output
The resulting type after applying the - operator.
fn neg(self) -> <Wrapping<usize> as Neg>::Output[src]
impl Neg for Wrapping<u8>1.10.0[src]
impl<'_> Neg for &'_ Wrapping<u8>1.14.0[src]
type Output = <Wrapping<u8> as Neg>::Output
The resulting type after applying the - operator.
fn neg(self) -> <Wrapping<u8> as Neg>::Output[src]
impl Neg for Wrapping<u16>1.10.0[src]
impl<'_> Neg for &'_ Wrapping<u16>1.14.0[src]
type Output = <Wrapping<u16> as Neg>::Output
The resulting type after applying the - operator.
fn neg(self) -> <Wrapping<u16> as Neg>::Output[src]
impl Neg for Wrapping<u32>1.10.0[src]
impl<'_> Neg for &'_ Wrapping<u32>1.14.0[src]
type Output = <Wrapping<u32> as Neg>::Output
The resulting type after applying the - operator.
fn neg(self) -> <Wrapping<u32> as Neg>::Output[src]
impl Neg for Wrapping<u64>1.10.0[src]
impl<'_> Neg for &'_ Wrapping<u64>1.14.0[src]
type Output = <Wrapping<u64> as Neg>::Output
The resulting type after applying the - operator.
fn neg(self) -> <Wrapping<u64> as Neg>::Output[src]
impl Neg for Wrapping<u128>1.10.0[src]
impl<'_> Neg for &'_ Wrapping<u128>1.14.0[src]
type Output = <Wrapping<u128> as Neg>::Output
The resulting type after applying the - operator.
fn neg(self) -> <Wrapping<u128> as Neg>::Output[src]
impl Neg for Wrapping<isize>1.10.0[src]
impl<'_> Neg for &'_ Wrapping<isize>1.14.0[src]
type Output = <Wrapping<isize> as Neg>::Output
The resulting type after applying the - operator.
fn neg(self) -> <Wrapping<isize> as Neg>::Output[src]
impl Neg for Wrapping<i8>1.10.0[src]
impl<'_> Neg for &'_ Wrapping<i8>1.14.0[src]
type Output = <Wrapping<i8> as Neg>::Output
The resulting type after applying the - operator.
fn neg(self) -> <Wrapping<i8> as Neg>::Output[src]
impl Neg for Wrapping<i16>1.10.0[src]
impl<'_> Neg for &'_ Wrapping<i16>1.14.0[src]
type Output = <Wrapping<i16> as Neg>::Output
The resulting type after applying the - operator.
fn neg(self) -> <Wrapping<i16> as Neg>::Output[src]
impl Neg for Wrapping<i32>1.10.0[src]
impl<'_> Neg for &'_ Wrapping<i32>1.14.0[src]
type Output = <Wrapping<i32> as Neg>::Output
The resulting type after applying the - operator.
fn neg(self) -> <Wrapping<i32> as Neg>::Output[src]
impl Neg for Wrapping<i64>1.10.0[src]
impl<'_> Neg for &'_ Wrapping<i64>1.14.0[src]
type Output = <Wrapping<i64> as Neg>::Output
The resulting type after applying the - operator.
fn neg(self) -> <Wrapping<i64> as Neg>::Output[src]
impl Neg for Wrapping<i128>1.10.0[src]
impl<'_> Neg for &'_ Wrapping<i128>1.14.0[src]
type Output = <Wrapping<i128> as Neg>::Output
The resulting type after applying the - operator.
fn neg(self) -> <Wrapping<i128> as Neg>::Output[src]
impl AddAssign<Wrapping<usize>> for Wrapping<usize>1.8.0[src]
fn add_assign(&mut self, other: Wrapping<usize>)[src]
impl<'_> AddAssign<&'_ Wrapping<usize>> for Wrapping<usize>1.22.0[src]
fn add_assign(&mut self, other: &Wrapping<usize>)[src]
impl AddAssign<Wrapping<u8>> for Wrapping<u8>1.8.0[src]
fn add_assign(&mut self, other: Wrapping<u8>)[src]
impl<'_> AddAssign<&'_ Wrapping<u8>> for Wrapping<u8>1.22.0[src]
fn add_assign(&mut self, other: &Wrapping<u8>)[src]
impl AddAssign<Wrapping<u16>> for Wrapping<u16>1.8.0[src]
fn add_assign(&mut self, other: Wrapping<u16>)[src]
impl<'_> AddAssign<&'_ Wrapping<u16>> for Wrapping<u16>1.22.0[src]
fn add_assign(&mut self, other: &Wrapping<u16>)[src]
impl AddAssign<Wrapping<u32>> for Wrapping<u32>1.8.0[src]
fn add_assign(&mut self, other: Wrapping<u32>)[src]
impl<'_> AddAssign<&'_ Wrapping<u32>> for Wrapping<u32>1.22.0[src]
fn add_assign(&mut self, other: &Wrapping<u32>)[src]
impl AddAssign<Wrapping<u64>> for Wrapping<u64>1.8.0[src]
fn add_assign(&mut self, other: Wrapping<u64>)[src]
impl<'_> AddAssign<&'_ Wrapping<u64>> for Wrapping<u64>1.22.0[src]
fn add_assign(&mut self, other: &Wrapping<u64>)[src]
impl AddAssign<Wrapping<u128>> for Wrapping<u128>1.8.0[src]
fn add_assign(&mut self, other: Wrapping<u128>)[src]
impl<'_> AddAssign<&'_ Wrapping<u128>> for Wrapping<u128>1.22.0[src]
fn add_assign(&mut self, other: &Wrapping<u128>)[src]
impl AddAssign<Wrapping<isize>> for Wrapping<isize>1.8.0[src]
fn add_assign(&mut self, other: Wrapping<isize>)[src]
impl<'_> AddAssign<&'_ Wrapping<isize>> for Wrapping<isize>1.22.0[src]
fn add_assign(&mut self, other: &Wrapping<isize>)[src]
impl AddAssign<Wrapping<i8>> for Wrapping<i8>1.8.0[src]
fn add_assign(&mut self, other: Wrapping<i8>)[src]
impl<'_> AddAssign<&'_ Wrapping<i8>> for Wrapping<i8>1.22.0[src]
fn add_assign(&mut self, other: &Wrapping<i8>)[src]
impl AddAssign<Wrapping<i16>> for Wrapping<i16>1.8.0[src]
fn add_assign(&mut self, other: Wrapping<i16>)[src]
impl<'_> AddAssign<&'_ Wrapping<i16>> for Wrapping<i16>1.22.0[src]
fn add_assign(&mut self, other: &Wrapping<i16>)[src]
impl AddAssign<Wrapping<i32>> for Wrapping<i32>1.8.0[src]
fn add_assign(&mut self, other: Wrapping<i32>)[src]
impl<'_> AddAssign<&'_ Wrapping<i32>> for Wrapping<i32>1.22.0[src]
fn add_assign(&mut self, other: &Wrapping<i32>)[src]
impl AddAssign<Wrapping<i64>> for Wrapping<i64>1.8.0[src]
fn add_assign(&mut self, other: Wrapping<i64>)[src]
impl<'_> AddAssign<&'_ Wrapping<i64>> for Wrapping<i64>1.22.0[src]
fn add_assign(&mut self, other: &Wrapping<i64>)[src]
impl AddAssign<Wrapping<i128>> for Wrapping<i128>1.8.0[src]
fn add_assign(&mut self, other: Wrapping<i128>)[src]
impl<'_> AddAssign<&'_ Wrapping<i128>> for Wrapping<i128>1.22.0[src]
fn add_assign(&mut self, other: &Wrapping<i128>)[src]
impl SubAssign<Wrapping<usize>> for Wrapping<usize>1.8.0[src]
fn sub_assign(&mut self, other: Wrapping<usize>)[src]
impl<'_> SubAssign<&'_ Wrapping<usize>> for Wrapping<usize>1.22.0[src]
fn sub_assign(&mut self, other: &Wrapping<usize>)[src]
impl SubAssign<Wrapping<u8>> for Wrapping<u8>1.8.0[src]
fn sub_assign(&mut self, other: Wrapping<u8>)[src]
impl<'_> SubAssign<&'_ Wrapping<u8>> for Wrapping<u8>1.22.0[src]
fn sub_assign(&mut self, other: &Wrapping<u8>)[src]
impl SubAssign<Wrapping<u16>> for Wrapping<u16>1.8.0[src]
fn sub_assign(&mut self, other: Wrapping<u16>)[src]
impl<'_> SubAssign<&'_ Wrapping<u16>> for Wrapping<u16>1.22.0[src]
fn sub_assign(&mut self, other: &Wrapping<u16>)[src]
impl SubAssign<Wrapping<u32>> for Wrapping<u32>1.8.0[src]
fn sub_assign(&mut self, other: Wrapping<u32>)[src]
impl<'_> SubAssign<&'_ Wrapping<u32>> for Wrapping<u32>1.22.0[src]
fn sub_assign(&mut self, other: &Wrapping<u32>)[src]
impl SubAssign<Wrapping<u64>> for Wrapping<u64>1.8.0[src]
fn sub_assign(&mut self, other: Wrapping<u64>)[src]
impl<'_> SubAssign<&'_ Wrapping<u64>> for Wrapping<u64>1.22.0[src]
fn sub_assign(&mut self, other: &Wrapping<u64>)[src]
impl SubAssign<Wrapping<u128>> for Wrapping<u128>1.8.0[src]
fn sub_assign(&mut self, other: Wrapping<u128>)[src]
impl<'_> SubAssign<&'_ Wrapping<u128>> for Wrapping<u128>1.22.0[src]
fn sub_assign(&mut self, other: &Wrapping<u128>)[src]
impl SubAssign<Wrapping<isize>> for Wrapping<isize>1.8.0[src]
fn sub_assign(&mut self, other: Wrapping<isize>)[src]
impl<'_> SubAssign<&'_ Wrapping<isize>> for Wrapping<isize>1.22.0[src]
fn sub_assign(&mut self, other: &Wrapping<isize>)[src]
impl SubAssign<Wrapping<i8>> for Wrapping<i8>1.8.0[src]
fn sub_assign(&mut self, other: Wrapping<i8>)[src]
impl<'_> SubAssign<&'_ Wrapping<i8>> for Wrapping<i8>1.22.0[src]
fn sub_assign(&mut self, other: &Wrapping<i8>)[src]
impl SubAssign<Wrapping<i16>> for Wrapping<i16>1.8.0[src]
fn sub_assign(&mut self, other: Wrapping<i16>)[src]
impl<'_> SubAssign<&'_ Wrapping<i16>> for Wrapping<i16>1.22.0[src]
fn sub_assign(&mut self, other: &Wrapping<i16>)[src]
impl SubAssign<Wrapping<i32>> for Wrapping<i32>1.8.0[src]
fn sub_assign(&mut self, other: Wrapping<i32>)[src]
impl<'_> SubAssign<&'_ Wrapping<i32>> for Wrapping<i32>1.22.0[src]
fn sub_assign(&mut self, other: &Wrapping<i32>)[src]
impl SubAssign<Wrapping<i64>> for Wrapping<i64>1.8.0[src]
fn sub_assign(&mut self, other: Wrapping<i64>)[src]
impl<'_> SubAssign<&'_ Wrapping<i64>> for Wrapping<i64>1.22.0[src]
fn sub_assign(&mut self, other: &Wrapping<i64>)[src]
impl SubAssign<Wrapping<i128>> for Wrapping<i128>1.8.0[src]
fn sub_assign(&mut self, other: Wrapping<i128>)[src]
impl<'_> SubAssign<&'_ Wrapping<i128>> for Wrapping<i128>1.22.0[src]
fn sub_assign(&mut self, other: &Wrapping<i128>)[src]
impl MulAssign<Wrapping<usize>> for Wrapping<usize>1.8.0[src]
fn mul_assign(&mut self, other: Wrapping<usize>)[src]
impl<'_> MulAssign<&'_ Wrapping<usize>> for Wrapping<usize>1.22.0[src]
fn mul_assign(&mut self, other: &Wrapping<usize>)[src]
impl MulAssign<Wrapping<u8>> for Wrapping<u8>1.8.0[src]
fn mul_assign(&mut self, other: Wrapping<u8>)[src]
impl<'_> MulAssign<&'_ Wrapping<u8>> for Wrapping<u8>1.22.0[src]
fn mul_assign(&mut self, other: &Wrapping<u8>)[src]
impl MulAssign<Wrapping<u16>> for Wrapping<u16>1.8.0[src]
fn mul_assign(&mut self, other: Wrapping<u16>)[src]
impl<'_> MulAssign<&'_ Wrapping<u16>> for Wrapping<u16>1.22.0[src]
fn mul_assign(&mut self, other: &Wrapping<u16>)[src]
impl MulAssign<Wrapping<u32>> for Wrapping<u32>1.8.0[src]
fn mul_assign(&mut self, other: Wrapping<u32>)[src]
impl<'_> MulAssign<&'_ Wrapping<u32>> for Wrapping<u32>1.22.0[src]
fn mul_assign(&mut self, other: &Wrapping<u32>)[src]
impl MulAssign<Wrapping<u64>> for Wrapping<u64>1.8.0[src]
fn mul_assign(&mut self, other: Wrapping<u64>)[src]
impl<'_> MulAssign<&'_ Wrapping<u64>> for Wrapping<u64>1.22.0[src]
fn mul_assign(&mut self, other: &Wrapping<u64>)[src]
impl MulAssign<Wrapping<u128>> for Wrapping<u128>1.8.0[src]
fn mul_assign(&mut self, other: Wrapping<u128>)[src]
impl<'_> MulAssign<&'_ Wrapping<u128>> for Wrapping<u128>1.22.0[src]
fn mul_assign(&mut self, other: &Wrapping<u128>)[src]
impl MulAssign<Wrapping<isize>> for Wrapping<isize>1.8.0[src]
fn mul_assign(&mut self, other: Wrapping<isize>)[src]
impl<'_> MulAssign<&'_ Wrapping<isize>> for Wrapping<isize>1.22.0[src]
fn mul_assign(&mut self, other: &Wrapping<isize>)[src]
impl MulAssign<Wrapping<i8>> for Wrapping<i8>1.8.0[src]
fn mul_assign(&mut self, other: Wrapping<i8>)[src]
impl<'_> MulAssign<&'_ Wrapping<i8>> for Wrapping<i8>1.22.0[src]
fn mul_assign(&mut self, other: &Wrapping<i8>)[src]
impl MulAssign<Wrapping<i16>> for Wrapping<i16>1.8.0[src]
fn mul_assign(&mut self, other: Wrapping<i16>)[src]
impl<'_> MulAssign<&'_ Wrapping<i16>> for Wrapping<i16>1.22.0[src]
fn mul_assign(&mut self, other: &Wrapping<i16>)[src]
impl MulAssign<Wrapping<i32>> for Wrapping<i32>1.8.0[src]
fn mul_assign(&mut self, other: Wrapping<i32>)[src]
impl<'_> MulAssign<&'_ Wrapping<i32>> for Wrapping<i32>1.22.0[src]
fn mul_assign(&mut self, other: &Wrapping<i32>)[src]
impl MulAssign<Wrapping<i64>> for Wrapping<i64>1.8.0[src]
fn mul_assign(&mut self, other: Wrapping<i64>)[src]
impl<'_> MulAssign<&'_ Wrapping<i64>> for Wrapping<i64>1.22.0[src]
fn mul_assign(&mut self, other: &Wrapping<i64>)[src]
impl MulAssign<Wrapping<i128>> for Wrapping<i128>1.8.0[src]
fn mul_assign(&mut self, other: Wrapping<i128>)[src]
impl<'_> MulAssign<&'_ Wrapping<i128>> for Wrapping<i128>1.22.0[src]
fn mul_assign(&mut self, other: &Wrapping<i128>)[src]
impl DivAssign<Wrapping<usize>> for Wrapping<usize>1.8.0[src]
fn div_assign(&mut self, other: Wrapping<usize>)[src]
impl<'_> DivAssign<&'_ Wrapping<usize>> for Wrapping<usize>1.22.0[src]
fn div_assign(&mut self, other: &Wrapping<usize>)[src]
impl DivAssign<Wrapping<u8>> for Wrapping<u8>1.8.0[src]
fn div_assign(&mut self, other: Wrapping<u8>)[src]
impl<'_> DivAssign<&'_ Wrapping<u8>> for Wrapping<u8>1.22.0[src]
fn div_assign(&mut self, other: &Wrapping<u8>)[src]
impl DivAssign<Wrapping<u16>> for Wrapping<u16>1.8.0[src]
fn div_assign(&mut self, other: Wrapping<u16>)[src]
impl<'_> DivAssign<&'_ Wrapping<u16>> for Wrapping<u16>1.22.0[src]
fn div_assign(&mut self, other: &Wrapping<u16>)[src]
impl DivAssign<Wrapping<u32>> for Wrapping<u32>1.8.0[src]
fn div_assign(&mut self, other: Wrapping<u32>)[src]
impl<'_> DivAssign<&'_ Wrapping<u32>> for Wrapping<u32>1.22.0[src]
fn div_assign(&mut self, other: &Wrapping<u32>)[src]
impl DivAssign<Wrapping<u64>> for Wrapping<u64>1.8.0[src]
fn div_assign(&mut self, other: Wrapping<u64>)[src]
impl<'_> DivAssign<&'_ Wrapping<u64>> for Wrapping<u64>1.22.0[src]
fn div_assign(&mut self, other: &Wrapping<u64>)[src]
impl DivAssign<Wrapping<u128>> for Wrapping<u128>1.8.0[src]
fn div_assign(&mut self, other: Wrapping<u128>)[src]
impl<'_> DivAssign<&'_ Wrapping<u128>> for Wrapping<u128>1.22.0[src]
fn div_assign(&mut self, other: &Wrapping<u128>)[src]
impl DivAssign<Wrapping<isize>> for Wrapping<isize>1.8.0[src]
fn div_assign(&mut self, other: Wrapping<isize>)[src]
impl<'_> DivAssign<&'_ Wrapping<isize>> for Wrapping<isize>1.22.0[src]
fn div_assign(&mut self, other: &Wrapping<isize>)[src]
impl DivAssign<Wrapping<i8>> for Wrapping<i8>1.8.0[src]
fn div_assign(&mut self, other: Wrapping<i8>)[src]
impl<'_> DivAssign<&'_ Wrapping<i8>> for Wrapping<i8>1.22.0[src]
fn div_assign(&mut self, other: &Wrapping<i8>)[src]
impl DivAssign<Wrapping<i16>> for Wrapping<i16>1.8.0[src]
fn div_assign(&mut self, other: Wrapping<i16>)[src]
impl<'_> DivAssign<&'_ Wrapping<i16>> for Wrapping<i16>1.22.0[src]
fn div_assign(&mut self, other: &Wrapping<i16>)[src]
impl DivAssign<Wrapping<i32>> for Wrapping<i32>1.8.0[src]
fn div_assign(&mut self, other: Wrapping<i32>)[src]
impl<'_> DivAssign<&'_ Wrapping<i32>> for Wrapping<i32>1.22.0[src]
fn div_assign(&mut self, other: &Wrapping<i32>)[src]
impl DivAssign<Wrapping<i64>> for Wrapping<i64>1.8.0[src]
fn div_assign(&mut self, other: Wrapping<i64>)[src]
impl<'_> DivAssign<&'_ Wrapping<i64>> for Wrapping<i64>1.22.0[src]
fn div_assign(&mut self, other: &Wrapping<i64>)[src]
impl DivAssign<Wrapping<i128>> for Wrapping<i128>1.8.0[src]
fn div_assign(&mut self, other: Wrapping<i128>)[src]
impl<'_> DivAssign<&'_ Wrapping<i128>> for Wrapping<i128>1.22.0[src]
fn div_assign(&mut self, other: &Wrapping<i128>)[src]
impl RemAssign<Wrapping<usize>> for Wrapping<usize>1.8.0[src]
fn rem_assign(&mut self, other: Wrapping<usize>)[src]
impl<'_> RemAssign<&'_ Wrapping<usize>> for Wrapping<usize>1.22.0[src]
fn rem_assign(&mut self, other: &Wrapping<usize>)[src]
impl RemAssign<Wrapping<u8>> for Wrapping<u8>1.8.0[src]
fn rem_assign(&mut self, other: Wrapping<u8>)[src]
impl<'_> RemAssign<&'_ Wrapping<u8>> for Wrapping<u8>1.22.0[src]
fn rem_assign(&mut self, other: &Wrapping<u8>)[src]
impl RemAssign<Wrapping<u16>> for Wrapping<u16>1.8.0[src]
fn rem_assign(&mut self, other: Wrapping<u16>)[src]
impl<'_> RemAssign<&'_ Wrapping<u16>> for Wrapping<u16>1.22.0[src]
fn rem_assign(&mut self, other: &Wrapping<u16>)[src]
impl RemAssign<Wrapping<u32>> for Wrapping<u32>1.8.0[src]
fn rem_assign(&mut self, other: Wrapping<u32>)[src]
impl<'_> RemAssign<&'_ Wrapping<u32>> for Wrapping<u32>1.22.0[src]
fn rem_assign(&mut self, other: &Wrapping<u32>)[src]
impl RemAssign<Wrapping<u64>> for Wrapping<u64>1.8.0[src]
fn rem_assign(&mut self, other: Wrapping<u64>)[src]
impl<'_> RemAssign<&'_ Wrapping<u64>> for Wrapping<u64>1.22.0[src]
fn rem_assign(&mut self, other: &Wrapping<u64>)[src]
impl RemAssign<Wrapping<u128>> for Wrapping<u128>1.8.0[src]
fn rem_assign(&mut self, other: Wrapping<u128>)[src]
impl<'_> RemAssign<&'_ Wrapping<u128>> for Wrapping<u128>1.22.0[src]
fn rem_assign(&mut self, other: &Wrapping<u128>)[src]
impl RemAssign<Wrapping<isize>> for Wrapping<isize>1.8.0[src]
fn rem_assign(&mut self, other: Wrapping<isize>)[src]
impl<'_> RemAssign<&'_ Wrapping<isize>> for Wrapping<isize>1.22.0[src]
fn rem_assign(&mut self, other: &Wrapping<isize>)[src]
impl RemAssign<Wrapping<i8>> for Wrapping<i8>1.8.0[src]
fn rem_assign(&mut self, other: Wrapping<i8>)[src]
impl<'_> RemAssign<&'_ Wrapping<i8>> for Wrapping<i8>1.22.0[src]
fn rem_assign(&mut self, other: &Wrapping<i8>)[src]
impl RemAssign<Wrapping<i16>> for Wrapping<i16>1.8.0[src]
fn rem_assign(&mut self, other: Wrapping<i16>)[src]
impl<'_> RemAssign<&'_ Wrapping<i16>> for Wrapping<i16>1.22.0[src]
fn rem_assign(&mut self, other: &Wrapping<i16>)[src]
impl RemAssign<Wrapping<i32>> for Wrapping<i32>1.8.0[src]
fn rem_assign(&mut self, other: Wrapping<i32>)[src]
impl<'_> RemAssign<&'_ Wrapping<i32>> for Wrapping<i32>1.22.0[src]
fn rem_assign(&mut self, other: &Wrapping<i32>)[src]
impl RemAssign<Wrapping<i64>> for Wrapping<i64>1.8.0[src]
fn rem_assign(&mut self, other: Wrapping<i64>)[src]
impl<'_> RemAssign<&'_ Wrapping<i64>> for Wrapping<i64>1.22.0[src]
fn rem_assign(&mut self, other: &Wrapping<i64>)[src]
impl RemAssign<Wrapping<i128>> for Wrapping<i128>1.8.0[src]
fn rem_assign(&mut self, other: Wrapping<i128>)[src]
impl<'_> RemAssign<&'_ Wrapping<i128>> for Wrapping<i128>1.22.0[src]
fn rem_assign(&mut self, other: &Wrapping<i128>)[src]
impl Not for Wrapping<usize>[src]
type Output = Wrapping<usize>
The resulting type after applying the ! operator.
fn not(self) -> Wrapping<usize>[src]
impl<'_> Not for &'_ Wrapping<usize>1.14.0[src]
type Output = <Wrapping<usize> as Not>::Output
The resulting type after applying the ! operator.
fn not(self) -> <Wrapping<usize> as Not>::Output[src]
impl Not for Wrapping<u8>[src]
type Output = Wrapping<u8>
The resulting type after applying the ! operator.
fn not(self) -> Wrapping<u8>[src]
impl<'_> Not for &'_ Wrapping<u8>1.14.0[src]
type Output = <Wrapping<u8> as Not>::Output
The resulting type after applying the ! operator.
fn not(self) -> <Wrapping<u8> as Not>::Output[src]
impl Not for Wrapping<u16>[src]
type Output = Wrapping<u16>
The resulting type after applying the ! operator.
fn not(self) -> Wrapping<u16>[src]
impl<'_> Not for &'_ Wrapping<u16>1.14.0[src]
type Output = <Wrapping<u16> as Not>::Output
The resulting type after applying the ! operator.
fn not(self) -> <Wrapping<u16> as Not>::Output[src]
impl Not for Wrapping<u32>[src]
type Output = Wrapping<u32>
The resulting type after applying the ! operator.
fn not(self) -> Wrapping<u32>[src]
impl<'_> Not for &'_ Wrapping<u32>1.14.0[src]
type Output = <Wrapping<u32> as Not>::Output
The resulting type after applying the ! operator.
fn not(self) -> <Wrapping<u32> as Not>::Output[src]
impl Not for Wrapping<u64>[src]
type Output = Wrapping<u64>
The resulting type after applying the ! operator.
fn not(self) -> Wrapping<u64>[src]
impl<'_> Not for &'_ Wrapping<u64>1.14.0[src]
type Output = <Wrapping<u64> as Not>::Output
The resulting type after applying the ! operator.
fn not(self) -> <Wrapping<u64> as Not>::Output[src]
impl Not for Wrapping<u128>[src]
type Output = Wrapping<u128>
The resulting type after applying the ! operator.
fn not(self) -> Wrapping<u128>[src]
impl<'_> Not for &'_ Wrapping<u128>1.14.0[src]
type Output = <Wrapping<u128> as Not>::Output
The resulting type after applying the ! operator.
fn not(self) -> <Wrapping<u128> as Not>::Output[src]
impl Not for Wrapping<isize>[src]
type Output = Wrapping<isize>
The resulting type after applying the ! operator.
fn not(self) -> Wrapping<isize>[src]
impl<'_> Not for &'_ Wrapping<isize>1.14.0[src]
type Output = <Wrapping<isize> as Not>::Output
The resulting type after applying the ! operator.
fn not(self) -> <Wrapping<isize> as Not>::Output[src]
impl Not for Wrapping<i8>[src]
type Output = Wrapping<i8>
The resulting type after applying the ! operator.
fn not(self) -> Wrapping<i8>[src]
impl<'_> Not for &'_ Wrapping<i8>1.14.0[src]
type Output = <Wrapping<i8> as Not>::Output
The resulting type after applying the ! operator.
fn not(self) -> <Wrapping<i8> as Not>::Output[src]
impl Not for Wrapping<i16>[src]
type Output = Wrapping<i16>
The resulting type after applying the ! operator.
fn not(self) -> Wrapping<i16>[src]
impl<'_> Not for &'_ Wrapping<i16>1.14.0[src]
type Output = <Wrapping<i16> as Not>::Output
The resulting type after applying the ! operator.
fn not(self) -> <Wrapping<i16> as Not>::Output[src]
impl Not for Wrapping<i32>[src]
type Output = Wrapping<i32>
The resulting type after applying the ! operator.
fn not(self) -> Wrapping<i32>[src]
impl<'_> Not for &'_ Wrapping<i32>1.14.0[src]
type Output = <Wrapping<i32> as Not>::Output
The resulting type after applying the ! operator.
fn not(self) -> <Wrapping<i32> as Not>::Output[src]
impl Not for Wrapping<i64>[src]
type Output = Wrapping<i64>
The resulting type after applying the ! operator.
fn not(self) -> Wrapping<i64>[src]
impl<'_> Not for &'_ Wrapping<i64>1.14.0[src]
type Output = <Wrapping<i64> as Not>::Output
The resulting type after applying the ! operator.
fn not(self) -> <Wrapping<i64> as Not>::Output[src]
impl Not for Wrapping<i128>[src]
type Output = Wrapping<i128>
The resulting type after applying the ! operator.
fn not(self) -> Wrapping<i128>[src]
impl<'_> Not for &'_ Wrapping<i128>1.14.0[src]
type Output = <Wrapping<i128> as Not>::Output
The resulting type after applying the ! operator.
fn not(self) -> <Wrapping<i128> as Not>::Output[src]
impl BitAnd<Wrapping<usize>> for Wrapping<usize>[src]
type Output = Wrapping<usize>
The resulting type after applying the & operator.
fn bitand(self, other: Wrapping<usize>) -> Wrapping<usize>[src]
impl<'a> BitAnd<Wrapping<usize>> for &'a Wrapping<usize>1.14.0[src]
type Output = <Wrapping<usize> as BitAnd<Wrapping<usize>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: Wrapping<usize>
) -> <Wrapping<usize> as BitAnd<Wrapping<usize>>>::Output[src]
self,
other: Wrapping<usize>
) -> <Wrapping<usize> as BitAnd<Wrapping<usize>>>::Output
impl<'_> BitAnd<&'_ Wrapping<usize>> for Wrapping<usize>1.14.0[src]
type Output = <Wrapping<usize> as BitAnd<Wrapping<usize>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as BitAnd<Wrapping<usize>>>::Output[src]
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as BitAnd<Wrapping<usize>>>::Output
impl<'_, '_> BitAnd<&'_ Wrapping<usize>> for &'_ Wrapping<usize>1.14.0[src]
type Output = <Wrapping<usize> as BitAnd<Wrapping<usize>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as BitAnd<Wrapping<usize>>>::Output[src]
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as BitAnd<Wrapping<usize>>>::Output
impl BitAnd<Wrapping<u8>> for Wrapping<u8>[src]
type Output = Wrapping<u8>
The resulting type after applying the & operator.
fn bitand(self, other: Wrapping<u8>) -> Wrapping<u8>[src]
impl<'a> BitAnd<Wrapping<u8>> for &'a Wrapping<u8>1.14.0[src]
type Output = <Wrapping<u8> as BitAnd<Wrapping<u8>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: Wrapping<u8>
) -> <Wrapping<u8> as BitAnd<Wrapping<u8>>>::Output[src]
self,
other: Wrapping<u8>
) -> <Wrapping<u8> as BitAnd<Wrapping<u8>>>::Output
impl<'_> BitAnd<&'_ Wrapping<u8>> for Wrapping<u8>1.14.0[src]
type Output = <Wrapping<u8> as BitAnd<Wrapping<u8>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as BitAnd<Wrapping<u8>>>::Output[src]
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as BitAnd<Wrapping<u8>>>::Output
impl<'_, '_> BitAnd<&'_ Wrapping<u8>> for &'_ Wrapping<u8>1.14.0[src]
type Output = <Wrapping<u8> as BitAnd<Wrapping<u8>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as BitAnd<Wrapping<u8>>>::Output[src]
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as BitAnd<Wrapping<u8>>>::Output
impl BitAnd<Wrapping<u16>> for Wrapping<u16>[src]
type Output = Wrapping<u16>
The resulting type after applying the & operator.
fn bitand(self, other: Wrapping<u16>) -> Wrapping<u16>[src]
impl<'a> BitAnd<Wrapping<u16>> for &'a Wrapping<u16>1.14.0[src]
type Output = <Wrapping<u16> as BitAnd<Wrapping<u16>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: Wrapping<u16>
) -> <Wrapping<u16> as BitAnd<Wrapping<u16>>>::Output[src]
self,
other: Wrapping<u16>
) -> <Wrapping<u16> as BitAnd<Wrapping<u16>>>::Output
impl<'_> BitAnd<&'_ Wrapping<u16>> for Wrapping<u16>1.14.0[src]
type Output = <Wrapping<u16> as BitAnd<Wrapping<u16>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as BitAnd<Wrapping<u16>>>::Output[src]
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as BitAnd<Wrapping<u16>>>::Output
impl<'_, '_> BitAnd<&'_ Wrapping<u16>> for &'_ Wrapping<u16>1.14.0[src]
type Output = <Wrapping<u16> as BitAnd<Wrapping<u16>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as BitAnd<Wrapping<u16>>>::Output[src]
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as BitAnd<Wrapping<u16>>>::Output
impl BitAnd<Wrapping<u32>> for Wrapping<u32>[src]
type Output = Wrapping<u32>
The resulting type after applying the & operator.
fn bitand(self, other: Wrapping<u32>) -> Wrapping<u32>[src]
impl<'a> BitAnd<Wrapping<u32>> for &'a Wrapping<u32>1.14.0[src]
type Output = <Wrapping<u32> as BitAnd<Wrapping<u32>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: Wrapping<u32>
) -> <Wrapping<u32> as BitAnd<Wrapping<u32>>>::Output[src]
self,
other: Wrapping<u32>
) -> <Wrapping<u32> as BitAnd<Wrapping<u32>>>::Output
impl<'_> BitAnd<&'_ Wrapping<u32>> for Wrapping<u32>1.14.0[src]
type Output = <Wrapping<u32> as BitAnd<Wrapping<u32>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as BitAnd<Wrapping<u32>>>::Output[src]
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as BitAnd<Wrapping<u32>>>::Output
impl<'_, '_> BitAnd<&'_ Wrapping<u32>> for &'_ Wrapping<u32>1.14.0[src]
type Output = <Wrapping<u32> as BitAnd<Wrapping<u32>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as BitAnd<Wrapping<u32>>>::Output[src]
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as BitAnd<Wrapping<u32>>>::Output
impl BitAnd<Wrapping<u64>> for Wrapping<u64>[src]
type Output = Wrapping<u64>
The resulting type after applying the & operator.
fn bitand(self, other: Wrapping<u64>) -> Wrapping<u64>[src]
impl<'a> BitAnd<Wrapping<u64>> for &'a Wrapping<u64>1.14.0[src]
type Output = <Wrapping<u64> as BitAnd<Wrapping<u64>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: Wrapping<u64>
) -> <Wrapping<u64> as BitAnd<Wrapping<u64>>>::Output[src]
self,
other: Wrapping<u64>
) -> <Wrapping<u64> as BitAnd<Wrapping<u64>>>::Output
impl<'_> BitAnd<&'_ Wrapping<u64>> for Wrapping<u64>1.14.0[src]
type Output = <Wrapping<u64> as BitAnd<Wrapping<u64>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as BitAnd<Wrapping<u64>>>::Output[src]
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as BitAnd<Wrapping<u64>>>::Output
impl<'_, '_> BitAnd<&'_ Wrapping<u64>> for &'_ Wrapping<u64>1.14.0[src]
type Output = <Wrapping<u64> as BitAnd<Wrapping<u64>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as BitAnd<Wrapping<u64>>>::Output[src]
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as BitAnd<Wrapping<u64>>>::Output
impl BitAnd<Wrapping<u128>> for Wrapping<u128>[src]
type Output = Wrapping<u128>
The resulting type after applying the & operator.
fn bitand(self, other: Wrapping<u128>) -> Wrapping<u128>[src]
impl<'a> BitAnd<Wrapping<u128>> for &'a Wrapping<u128>1.14.0[src]
type Output = <Wrapping<u128> as BitAnd<Wrapping<u128>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: Wrapping<u128>
) -> <Wrapping<u128> as BitAnd<Wrapping<u128>>>::Output[src]
self,
other: Wrapping<u128>
) -> <Wrapping<u128> as BitAnd<Wrapping<u128>>>::Output
impl<'_> BitAnd<&'_ Wrapping<u128>> for Wrapping<u128>1.14.0[src]
type Output = <Wrapping<u128> as BitAnd<Wrapping<u128>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as BitAnd<Wrapping<u128>>>::Output[src]
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as BitAnd<Wrapping<u128>>>::Output
impl<'_, '_> BitAnd<&'_ Wrapping<u128>> for &'_ Wrapping<u128>1.14.0[src]
type Output = <Wrapping<u128> as BitAnd<Wrapping<u128>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as BitAnd<Wrapping<u128>>>::Output[src]
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as BitAnd<Wrapping<u128>>>::Output
impl BitAnd<Wrapping<isize>> for Wrapping<isize>[src]
type Output = Wrapping<isize>
The resulting type after applying the & operator.
fn bitand(self, other: Wrapping<isize>) -> Wrapping<isize>[src]
impl<'a> BitAnd<Wrapping<isize>> for &'a Wrapping<isize>1.14.0[src]
type Output = <Wrapping<isize> as BitAnd<Wrapping<isize>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: Wrapping<isize>
) -> <Wrapping<isize> as BitAnd<Wrapping<isize>>>::Output[src]
self,
other: Wrapping<isize>
) -> <Wrapping<isize> as BitAnd<Wrapping<isize>>>::Output
impl<'_> BitAnd<&'_ Wrapping<isize>> for Wrapping<isize>1.14.0[src]
type Output = <Wrapping<isize> as BitAnd<Wrapping<isize>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as BitAnd<Wrapping<isize>>>::Output[src]
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as BitAnd<Wrapping<isize>>>::Output
impl<'_, '_> BitAnd<&'_ Wrapping<isize>> for &'_ Wrapping<isize>1.14.0[src]
type Output = <Wrapping<isize> as BitAnd<Wrapping<isize>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as BitAnd<Wrapping<isize>>>::Output[src]
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as BitAnd<Wrapping<isize>>>::Output
impl BitAnd<Wrapping<i8>> for Wrapping<i8>[src]
type Output = Wrapping<i8>
The resulting type after applying the & operator.
fn bitand(self, other: Wrapping<i8>) -> Wrapping<i8>[src]
impl<'a> BitAnd<Wrapping<i8>> for &'a Wrapping<i8>1.14.0[src]
type Output = <Wrapping<i8> as BitAnd<Wrapping<i8>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: Wrapping<i8>
) -> <Wrapping<i8> as BitAnd<Wrapping<i8>>>::Output[src]
self,
other: Wrapping<i8>
) -> <Wrapping<i8> as BitAnd<Wrapping<i8>>>::Output
impl<'_> BitAnd<&'_ Wrapping<i8>> for Wrapping<i8>1.14.0[src]
type Output = <Wrapping<i8> as BitAnd<Wrapping<i8>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as BitAnd<Wrapping<i8>>>::Output[src]
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as BitAnd<Wrapping<i8>>>::Output
impl<'_, '_> BitAnd<&'_ Wrapping<i8>> for &'_ Wrapping<i8>1.14.0[src]
type Output = <Wrapping<i8> as BitAnd<Wrapping<i8>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as BitAnd<Wrapping<i8>>>::Output[src]
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as BitAnd<Wrapping<i8>>>::Output
impl BitAnd<Wrapping<i16>> for Wrapping<i16>[src]
type Output = Wrapping<i16>
The resulting type after applying the & operator.
fn bitand(self, other: Wrapping<i16>) -> Wrapping<i16>[src]
impl<'a> BitAnd<Wrapping<i16>> for &'a Wrapping<i16>1.14.0[src]
type Output = <Wrapping<i16> as BitAnd<Wrapping<i16>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: Wrapping<i16>
) -> <Wrapping<i16> as BitAnd<Wrapping<i16>>>::Output[src]
self,
other: Wrapping<i16>
) -> <Wrapping<i16> as BitAnd<Wrapping<i16>>>::Output
impl<'_> BitAnd<&'_ Wrapping<i16>> for Wrapping<i16>1.14.0[src]
type Output = <Wrapping<i16> as BitAnd<Wrapping<i16>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as BitAnd<Wrapping<i16>>>::Output[src]
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as BitAnd<Wrapping<i16>>>::Output
impl<'_, '_> BitAnd<&'_ Wrapping<i16>> for &'_ Wrapping<i16>1.14.0[src]
type Output = <Wrapping<i16> as BitAnd<Wrapping<i16>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as BitAnd<Wrapping<i16>>>::Output[src]
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as BitAnd<Wrapping<i16>>>::Output
impl BitAnd<Wrapping<i32>> for Wrapping<i32>[src]
type Output = Wrapping<i32>
The resulting type after applying the & operator.
fn bitand(self, other: Wrapping<i32>) -> Wrapping<i32>[src]
impl<'a> BitAnd<Wrapping<i32>> for &'a Wrapping<i32>1.14.0[src]
type Output = <Wrapping<i32> as BitAnd<Wrapping<i32>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: Wrapping<i32>
) -> <Wrapping<i32> as BitAnd<Wrapping<i32>>>::Output[src]
self,
other: Wrapping<i32>
) -> <Wrapping<i32> as BitAnd<Wrapping<i32>>>::Output
impl<'_> BitAnd<&'_ Wrapping<i32>> for Wrapping<i32>1.14.0[src]
type Output = <Wrapping<i32> as BitAnd<Wrapping<i32>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as BitAnd<Wrapping<i32>>>::Output[src]
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as BitAnd<Wrapping<i32>>>::Output
impl<'_, '_> BitAnd<&'_ Wrapping<i32>> for &'_ Wrapping<i32>1.14.0[src]
type Output = <Wrapping<i32> as BitAnd<Wrapping<i32>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as BitAnd<Wrapping<i32>>>::Output[src]
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as BitAnd<Wrapping<i32>>>::Output
impl BitAnd<Wrapping<i64>> for Wrapping<i64>[src]
type Output = Wrapping<i64>
The resulting type after applying the & operator.
fn bitand(self, other: Wrapping<i64>) -> Wrapping<i64>[src]
impl<'a> BitAnd<Wrapping<i64>> for &'a Wrapping<i64>1.14.0[src]
type Output = <Wrapping<i64> as BitAnd<Wrapping<i64>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: Wrapping<i64>
) -> <Wrapping<i64> as BitAnd<Wrapping<i64>>>::Output[src]
self,
other: Wrapping<i64>
) -> <Wrapping<i64> as BitAnd<Wrapping<i64>>>::Output
impl<'_> BitAnd<&'_ Wrapping<i64>> for Wrapping<i64>1.14.0[src]
type Output = <Wrapping<i64> as BitAnd<Wrapping<i64>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as BitAnd<Wrapping<i64>>>::Output[src]
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as BitAnd<Wrapping<i64>>>::Output
impl<'_, '_> BitAnd<&'_ Wrapping<i64>> for &'_ Wrapping<i64>1.14.0[src]
type Output = <Wrapping<i64> as BitAnd<Wrapping<i64>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as BitAnd<Wrapping<i64>>>::Output[src]
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as BitAnd<Wrapping<i64>>>::Output
impl BitAnd<Wrapping<i128>> for Wrapping<i128>[src]
type Output = Wrapping<i128>
The resulting type after applying the & operator.
fn bitand(self, other: Wrapping<i128>) -> Wrapping<i128>[src]
impl<'a> BitAnd<Wrapping<i128>> for &'a Wrapping<i128>1.14.0[src]
type Output = <Wrapping<i128> as BitAnd<Wrapping<i128>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: Wrapping<i128>
) -> <Wrapping<i128> as BitAnd<Wrapping<i128>>>::Output[src]
self,
other: Wrapping<i128>
) -> <Wrapping<i128> as BitAnd<Wrapping<i128>>>::Output
impl<'_> BitAnd<&'_ Wrapping<i128>> for Wrapping<i128>1.14.0[src]
type Output = <Wrapping<i128> as BitAnd<Wrapping<i128>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as BitAnd<Wrapping<i128>>>::Output[src]
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as BitAnd<Wrapping<i128>>>::Output
impl<'_, '_> BitAnd<&'_ Wrapping<i128>> for &'_ Wrapping<i128>1.14.0[src]
type Output = <Wrapping<i128> as BitAnd<Wrapping<i128>>>::Output
The resulting type after applying the & operator.
fn bitand(
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as BitAnd<Wrapping<i128>>>::Output[src]
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as BitAnd<Wrapping<i128>>>::Output
impl BitOr<Wrapping<usize>> for Wrapping<usize>[src]
type Output = Wrapping<usize>
The resulting type after applying the | operator.
fn bitor(self, other: Wrapping<usize>) -> Wrapping<usize>[src]
impl<'a> BitOr<Wrapping<usize>> for &'a Wrapping<usize>1.14.0[src]
type Output = <Wrapping<usize> as BitOr<Wrapping<usize>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: Wrapping<usize>
) -> <Wrapping<usize> as BitOr<Wrapping<usize>>>::Output[src]
self,
other: Wrapping<usize>
) -> <Wrapping<usize> as BitOr<Wrapping<usize>>>::Output
impl<'_> BitOr<&'_ Wrapping<usize>> for Wrapping<usize>1.14.0[src]
type Output = <Wrapping<usize> as BitOr<Wrapping<usize>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as BitOr<Wrapping<usize>>>::Output[src]
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as BitOr<Wrapping<usize>>>::Output
impl<'_, '_> BitOr<&'_ Wrapping<usize>> for &'_ Wrapping<usize>1.14.0[src]
type Output = <Wrapping<usize> as BitOr<Wrapping<usize>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as BitOr<Wrapping<usize>>>::Output[src]
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as BitOr<Wrapping<usize>>>::Output
impl BitOr<Wrapping<u8>> for Wrapping<u8>[src]
type Output = Wrapping<u8>
The resulting type after applying the | operator.
fn bitor(self, other: Wrapping<u8>) -> Wrapping<u8>[src]
impl<'a> BitOr<Wrapping<u8>> for &'a Wrapping<u8>1.14.0[src]
type Output = <Wrapping<u8> as BitOr<Wrapping<u8>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: Wrapping<u8>
) -> <Wrapping<u8> as BitOr<Wrapping<u8>>>::Output[src]
self,
other: Wrapping<u8>
) -> <Wrapping<u8> as BitOr<Wrapping<u8>>>::Output
impl<'_> BitOr<&'_ Wrapping<u8>> for Wrapping<u8>1.14.0[src]
type Output = <Wrapping<u8> as BitOr<Wrapping<u8>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as BitOr<Wrapping<u8>>>::Output[src]
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as BitOr<Wrapping<u8>>>::Output
impl<'_, '_> BitOr<&'_ Wrapping<u8>> for &'_ Wrapping<u8>1.14.0[src]
type Output = <Wrapping<u8> as BitOr<Wrapping<u8>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as BitOr<Wrapping<u8>>>::Output[src]
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as BitOr<Wrapping<u8>>>::Output
impl BitOr<Wrapping<u16>> for Wrapping<u16>[src]
type Output = Wrapping<u16>
The resulting type after applying the | operator.
fn bitor(self, other: Wrapping<u16>) -> Wrapping<u16>[src]
impl<'a> BitOr<Wrapping<u16>> for &'a Wrapping<u16>1.14.0[src]
type Output = <Wrapping<u16> as BitOr<Wrapping<u16>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: Wrapping<u16>
) -> <Wrapping<u16> as BitOr<Wrapping<u16>>>::Output[src]
self,
other: Wrapping<u16>
) -> <Wrapping<u16> as BitOr<Wrapping<u16>>>::Output
impl<'_> BitOr<&'_ Wrapping<u16>> for Wrapping<u16>1.14.0[src]
type Output = <Wrapping<u16> as BitOr<Wrapping<u16>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as BitOr<Wrapping<u16>>>::Output[src]
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as BitOr<Wrapping<u16>>>::Output
impl<'_, '_> BitOr<&'_ Wrapping<u16>> for &'_ Wrapping<u16>1.14.0[src]
type Output = <Wrapping<u16> as BitOr<Wrapping<u16>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as BitOr<Wrapping<u16>>>::Output[src]
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as BitOr<Wrapping<u16>>>::Output
impl BitOr<Wrapping<u32>> for Wrapping<u32>[src]
type Output = Wrapping<u32>
The resulting type after applying the | operator.
fn bitor(self, other: Wrapping<u32>) -> Wrapping<u32>[src]
impl<'a> BitOr<Wrapping<u32>> for &'a Wrapping<u32>1.14.0[src]
type Output = <Wrapping<u32> as BitOr<Wrapping<u32>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: Wrapping<u32>
) -> <Wrapping<u32> as BitOr<Wrapping<u32>>>::Output[src]
self,
other: Wrapping<u32>
) -> <Wrapping<u32> as BitOr<Wrapping<u32>>>::Output
impl<'_> BitOr<&'_ Wrapping<u32>> for Wrapping<u32>1.14.0[src]
type Output = <Wrapping<u32> as BitOr<Wrapping<u32>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as BitOr<Wrapping<u32>>>::Output[src]
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as BitOr<Wrapping<u32>>>::Output
impl<'_, '_> BitOr<&'_ Wrapping<u32>> for &'_ Wrapping<u32>1.14.0[src]
type Output = <Wrapping<u32> as BitOr<Wrapping<u32>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as BitOr<Wrapping<u32>>>::Output[src]
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as BitOr<Wrapping<u32>>>::Output
impl BitOr<Wrapping<u64>> for Wrapping<u64>[src]
type Output = Wrapping<u64>
The resulting type after applying the | operator.
fn bitor(self, other: Wrapping<u64>) -> Wrapping<u64>[src]
impl<'a> BitOr<Wrapping<u64>> for &'a Wrapping<u64>1.14.0[src]
type Output = <Wrapping<u64> as BitOr<Wrapping<u64>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: Wrapping<u64>
) -> <Wrapping<u64> as BitOr<Wrapping<u64>>>::Output[src]
self,
other: Wrapping<u64>
) -> <Wrapping<u64> as BitOr<Wrapping<u64>>>::Output
impl<'_> BitOr<&'_ Wrapping<u64>> for Wrapping<u64>1.14.0[src]
type Output = <Wrapping<u64> as BitOr<Wrapping<u64>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as BitOr<Wrapping<u64>>>::Output[src]
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as BitOr<Wrapping<u64>>>::Output
impl<'_, '_> BitOr<&'_ Wrapping<u64>> for &'_ Wrapping<u64>1.14.0[src]
type Output = <Wrapping<u64> as BitOr<Wrapping<u64>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as BitOr<Wrapping<u64>>>::Output[src]
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as BitOr<Wrapping<u64>>>::Output
impl BitOr<Wrapping<u128>> for Wrapping<u128>[src]
type Output = Wrapping<u128>
The resulting type after applying the | operator.
fn bitor(self, other: Wrapping<u128>) -> Wrapping<u128>[src]
impl<'a> BitOr<Wrapping<u128>> for &'a Wrapping<u128>1.14.0[src]
type Output = <Wrapping<u128> as BitOr<Wrapping<u128>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: Wrapping<u128>
) -> <Wrapping<u128> as BitOr<Wrapping<u128>>>::Output[src]
self,
other: Wrapping<u128>
) -> <Wrapping<u128> as BitOr<Wrapping<u128>>>::Output
impl<'_> BitOr<&'_ Wrapping<u128>> for Wrapping<u128>1.14.0[src]
type Output = <Wrapping<u128> as BitOr<Wrapping<u128>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as BitOr<Wrapping<u128>>>::Output[src]
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as BitOr<Wrapping<u128>>>::Output
impl<'_, '_> BitOr<&'_ Wrapping<u128>> for &'_ Wrapping<u128>1.14.0[src]
type Output = <Wrapping<u128> as BitOr<Wrapping<u128>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as BitOr<Wrapping<u128>>>::Output[src]
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as BitOr<Wrapping<u128>>>::Output
impl BitOr<Wrapping<isize>> for Wrapping<isize>[src]
type Output = Wrapping<isize>
The resulting type after applying the | operator.
fn bitor(self, other: Wrapping<isize>) -> Wrapping<isize>[src]
impl<'a> BitOr<Wrapping<isize>> for &'a Wrapping<isize>1.14.0[src]
type Output = <Wrapping<isize> as BitOr<Wrapping<isize>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: Wrapping<isize>
) -> <Wrapping<isize> as BitOr<Wrapping<isize>>>::Output[src]
self,
other: Wrapping<isize>
) -> <Wrapping<isize> as BitOr<Wrapping<isize>>>::Output
impl<'_> BitOr<&'_ Wrapping<isize>> for Wrapping<isize>1.14.0[src]
type Output = <Wrapping<isize> as BitOr<Wrapping<isize>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as BitOr<Wrapping<isize>>>::Output[src]
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as BitOr<Wrapping<isize>>>::Output
impl<'_, '_> BitOr<&'_ Wrapping<isize>> for &'_ Wrapping<isize>1.14.0[src]
type Output = <Wrapping<isize> as BitOr<Wrapping<isize>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as BitOr<Wrapping<isize>>>::Output[src]
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as BitOr<Wrapping<isize>>>::Output
impl BitOr<Wrapping<i8>> for Wrapping<i8>[src]
type Output = Wrapping<i8>
The resulting type after applying the | operator.
fn bitor(self, other: Wrapping<i8>) -> Wrapping<i8>[src]
impl<'a> BitOr<Wrapping<i8>> for &'a Wrapping<i8>1.14.0[src]
type Output = <Wrapping<i8> as BitOr<Wrapping<i8>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: Wrapping<i8>
) -> <Wrapping<i8> as BitOr<Wrapping<i8>>>::Output[src]
self,
other: Wrapping<i8>
) -> <Wrapping<i8> as BitOr<Wrapping<i8>>>::Output
impl<'_> BitOr<&'_ Wrapping<i8>> for Wrapping<i8>1.14.0[src]
type Output = <Wrapping<i8> as BitOr<Wrapping<i8>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as BitOr<Wrapping<i8>>>::Output[src]
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as BitOr<Wrapping<i8>>>::Output
impl<'_, '_> BitOr<&'_ Wrapping<i8>> for &'_ Wrapping<i8>1.14.0[src]
type Output = <Wrapping<i8> as BitOr<Wrapping<i8>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as BitOr<Wrapping<i8>>>::Output[src]
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as BitOr<Wrapping<i8>>>::Output
impl BitOr<Wrapping<i16>> for Wrapping<i16>[src]
type Output = Wrapping<i16>
The resulting type after applying the | operator.
fn bitor(self, other: Wrapping<i16>) -> Wrapping<i16>[src]
impl<'a> BitOr<Wrapping<i16>> for &'a Wrapping<i16>1.14.0[src]
type Output = <Wrapping<i16> as BitOr<Wrapping<i16>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: Wrapping<i16>
) -> <Wrapping<i16> as BitOr<Wrapping<i16>>>::Output[src]
self,
other: Wrapping<i16>
) -> <Wrapping<i16> as BitOr<Wrapping<i16>>>::Output
impl<'_> BitOr<&'_ Wrapping<i16>> for Wrapping<i16>1.14.0[src]
type Output = <Wrapping<i16> as BitOr<Wrapping<i16>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as BitOr<Wrapping<i16>>>::Output[src]
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as BitOr<Wrapping<i16>>>::Output
impl<'_, '_> BitOr<&'_ Wrapping<i16>> for &'_ Wrapping<i16>1.14.0[src]
type Output = <Wrapping<i16> as BitOr<Wrapping<i16>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as BitOr<Wrapping<i16>>>::Output[src]
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as BitOr<Wrapping<i16>>>::Output
impl BitOr<Wrapping<i32>> for Wrapping<i32>[src]
type Output = Wrapping<i32>
The resulting type after applying the | operator.
fn bitor(self, other: Wrapping<i32>) -> Wrapping<i32>[src]
impl<'a> BitOr<Wrapping<i32>> for &'a Wrapping<i32>1.14.0[src]
type Output = <Wrapping<i32> as BitOr<Wrapping<i32>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: Wrapping<i32>
) -> <Wrapping<i32> as BitOr<Wrapping<i32>>>::Output[src]
self,
other: Wrapping<i32>
) -> <Wrapping<i32> as BitOr<Wrapping<i32>>>::Output
impl<'_> BitOr<&'_ Wrapping<i32>> for Wrapping<i32>1.14.0[src]
type Output = <Wrapping<i32> as BitOr<Wrapping<i32>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as BitOr<Wrapping<i32>>>::Output[src]
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as BitOr<Wrapping<i32>>>::Output
impl<'_, '_> BitOr<&'_ Wrapping<i32>> for &'_ Wrapping<i32>1.14.0[src]
type Output = <Wrapping<i32> as BitOr<Wrapping<i32>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as BitOr<Wrapping<i32>>>::Output[src]
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as BitOr<Wrapping<i32>>>::Output
impl BitOr<Wrapping<i64>> for Wrapping<i64>[src]
type Output = Wrapping<i64>
The resulting type after applying the | operator.
fn bitor(self, other: Wrapping<i64>) -> Wrapping<i64>[src]
impl<'a> BitOr<Wrapping<i64>> for &'a Wrapping<i64>1.14.0[src]
type Output = <Wrapping<i64> as BitOr<Wrapping<i64>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: Wrapping<i64>
) -> <Wrapping<i64> as BitOr<Wrapping<i64>>>::Output[src]
self,
other: Wrapping<i64>
) -> <Wrapping<i64> as BitOr<Wrapping<i64>>>::Output
impl<'_> BitOr<&'_ Wrapping<i64>> for Wrapping<i64>1.14.0[src]
type Output = <Wrapping<i64> as BitOr<Wrapping<i64>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as BitOr<Wrapping<i64>>>::Output[src]
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as BitOr<Wrapping<i64>>>::Output
impl<'_, '_> BitOr<&'_ Wrapping<i64>> for &'_ Wrapping<i64>1.14.0[src]
type Output = <Wrapping<i64> as BitOr<Wrapping<i64>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as BitOr<Wrapping<i64>>>::Output[src]
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as BitOr<Wrapping<i64>>>::Output
impl BitOr<Wrapping<i128>> for Wrapping<i128>[src]
type Output = Wrapping<i128>
The resulting type after applying the | operator.
fn bitor(self, other: Wrapping<i128>) -> Wrapping<i128>[src]
impl<'a> BitOr<Wrapping<i128>> for &'a Wrapping<i128>1.14.0[src]
type Output = <Wrapping<i128> as BitOr<Wrapping<i128>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: Wrapping<i128>
) -> <Wrapping<i128> as BitOr<Wrapping<i128>>>::Output[src]
self,
other: Wrapping<i128>
) -> <Wrapping<i128> as BitOr<Wrapping<i128>>>::Output
impl<'_> BitOr<&'_ Wrapping<i128>> for Wrapping<i128>1.14.0[src]
type Output = <Wrapping<i128> as BitOr<Wrapping<i128>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as BitOr<Wrapping<i128>>>::Output[src]
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as BitOr<Wrapping<i128>>>::Output
impl<'_, '_> BitOr<&'_ Wrapping<i128>> for &'_ Wrapping<i128>1.14.0[src]
type Output = <Wrapping<i128> as BitOr<Wrapping<i128>>>::Output
The resulting type after applying the | operator.
fn bitor(
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as BitOr<Wrapping<i128>>>::Output[src]
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as BitOr<Wrapping<i128>>>::Output
impl BitXor<Wrapping<usize>> for Wrapping<usize>[src]
type Output = Wrapping<usize>
The resulting type after applying the ^ operator.
fn bitxor(self, other: Wrapping<usize>) -> Wrapping<usize>[src]
impl<'a> BitXor<Wrapping<usize>> for &'a Wrapping<usize>1.14.0[src]
type Output = <Wrapping<usize> as BitXor<Wrapping<usize>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: Wrapping<usize>
) -> <Wrapping<usize> as BitXor<Wrapping<usize>>>::Output[src]
self,
other: Wrapping<usize>
) -> <Wrapping<usize> as BitXor<Wrapping<usize>>>::Output
impl<'_> BitXor<&'_ Wrapping<usize>> for Wrapping<usize>1.14.0[src]
type Output = <Wrapping<usize> as BitXor<Wrapping<usize>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as BitXor<Wrapping<usize>>>::Output[src]
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as BitXor<Wrapping<usize>>>::Output
impl<'_, '_> BitXor<&'_ Wrapping<usize>> for &'_ Wrapping<usize>1.14.0[src]
type Output = <Wrapping<usize> as BitXor<Wrapping<usize>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as BitXor<Wrapping<usize>>>::Output[src]
self,
other: &Wrapping<usize>
) -> <Wrapping<usize> as BitXor<Wrapping<usize>>>::Output
impl BitXor<Wrapping<u8>> for Wrapping<u8>[src]
type Output = Wrapping<u8>
The resulting type after applying the ^ operator.
fn bitxor(self, other: Wrapping<u8>) -> Wrapping<u8>[src]
impl<'a> BitXor<Wrapping<u8>> for &'a Wrapping<u8>1.14.0[src]
type Output = <Wrapping<u8> as BitXor<Wrapping<u8>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: Wrapping<u8>
) -> <Wrapping<u8> as BitXor<Wrapping<u8>>>::Output[src]
self,
other: Wrapping<u8>
) -> <Wrapping<u8> as BitXor<Wrapping<u8>>>::Output
impl<'_> BitXor<&'_ Wrapping<u8>> for Wrapping<u8>1.14.0[src]
type Output = <Wrapping<u8> as BitXor<Wrapping<u8>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as BitXor<Wrapping<u8>>>::Output[src]
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as BitXor<Wrapping<u8>>>::Output
impl<'_, '_> BitXor<&'_ Wrapping<u8>> for &'_ Wrapping<u8>1.14.0[src]
type Output = <Wrapping<u8> as BitXor<Wrapping<u8>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as BitXor<Wrapping<u8>>>::Output[src]
self,
other: &Wrapping<u8>
) -> <Wrapping<u8> as BitXor<Wrapping<u8>>>::Output
impl BitXor<Wrapping<u16>> for Wrapping<u16>[src]
type Output = Wrapping<u16>
The resulting type after applying the ^ operator.
fn bitxor(self, other: Wrapping<u16>) -> Wrapping<u16>[src]
impl<'a> BitXor<Wrapping<u16>> for &'a Wrapping<u16>1.14.0[src]
type Output = <Wrapping<u16> as BitXor<Wrapping<u16>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: Wrapping<u16>
) -> <Wrapping<u16> as BitXor<Wrapping<u16>>>::Output[src]
self,
other: Wrapping<u16>
) -> <Wrapping<u16> as BitXor<Wrapping<u16>>>::Output
impl<'_> BitXor<&'_ Wrapping<u16>> for Wrapping<u16>1.14.0[src]
type Output = <Wrapping<u16> as BitXor<Wrapping<u16>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as BitXor<Wrapping<u16>>>::Output[src]
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as BitXor<Wrapping<u16>>>::Output
impl<'_, '_> BitXor<&'_ Wrapping<u16>> for &'_ Wrapping<u16>1.14.0[src]
type Output = <Wrapping<u16> as BitXor<Wrapping<u16>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as BitXor<Wrapping<u16>>>::Output[src]
self,
other: &Wrapping<u16>
) -> <Wrapping<u16> as BitXor<Wrapping<u16>>>::Output
impl BitXor<Wrapping<u32>> for Wrapping<u32>[src]
type Output = Wrapping<u32>
The resulting type after applying the ^ operator.
fn bitxor(self, other: Wrapping<u32>) -> Wrapping<u32>[src]
impl<'a> BitXor<Wrapping<u32>> for &'a Wrapping<u32>1.14.0[src]
type Output = <Wrapping<u32> as BitXor<Wrapping<u32>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: Wrapping<u32>
) -> <Wrapping<u32> as BitXor<Wrapping<u32>>>::Output[src]
self,
other: Wrapping<u32>
) -> <Wrapping<u32> as BitXor<Wrapping<u32>>>::Output
impl<'_> BitXor<&'_ Wrapping<u32>> for Wrapping<u32>1.14.0[src]
type Output = <Wrapping<u32> as BitXor<Wrapping<u32>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as BitXor<Wrapping<u32>>>::Output[src]
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as BitXor<Wrapping<u32>>>::Output
impl<'_, '_> BitXor<&'_ Wrapping<u32>> for &'_ Wrapping<u32>1.14.0[src]
type Output = <Wrapping<u32> as BitXor<Wrapping<u32>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as BitXor<Wrapping<u32>>>::Output[src]
self,
other: &Wrapping<u32>
) -> <Wrapping<u32> as BitXor<Wrapping<u32>>>::Output
impl BitXor<Wrapping<u64>> for Wrapping<u64>[src]
type Output = Wrapping<u64>
The resulting type after applying the ^ operator.
fn bitxor(self, other: Wrapping<u64>) -> Wrapping<u64>[src]
impl<'a> BitXor<Wrapping<u64>> for &'a Wrapping<u64>1.14.0[src]
type Output = <Wrapping<u64> as BitXor<Wrapping<u64>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: Wrapping<u64>
) -> <Wrapping<u64> as BitXor<Wrapping<u64>>>::Output[src]
self,
other: Wrapping<u64>
) -> <Wrapping<u64> as BitXor<Wrapping<u64>>>::Output
impl<'_> BitXor<&'_ Wrapping<u64>> for Wrapping<u64>1.14.0[src]
type Output = <Wrapping<u64> as BitXor<Wrapping<u64>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as BitXor<Wrapping<u64>>>::Output[src]
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as BitXor<Wrapping<u64>>>::Output
impl<'_, '_> BitXor<&'_ Wrapping<u64>> for &'_ Wrapping<u64>1.14.0[src]
type Output = <Wrapping<u64> as BitXor<Wrapping<u64>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as BitXor<Wrapping<u64>>>::Output[src]
self,
other: &Wrapping<u64>
) -> <Wrapping<u64> as BitXor<Wrapping<u64>>>::Output
impl BitXor<Wrapping<u128>> for Wrapping<u128>[src]
type Output = Wrapping<u128>
The resulting type after applying the ^ operator.
fn bitxor(self, other: Wrapping<u128>) -> Wrapping<u128>[src]
impl<'a> BitXor<Wrapping<u128>> for &'a Wrapping<u128>1.14.0[src]
type Output = <Wrapping<u128> as BitXor<Wrapping<u128>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: Wrapping<u128>
) -> <Wrapping<u128> as BitXor<Wrapping<u128>>>::Output[src]
self,
other: Wrapping<u128>
) -> <Wrapping<u128> as BitXor<Wrapping<u128>>>::Output
impl<'_> BitXor<&'_ Wrapping<u128>> for Wrapping<u128>1.14.0[src]
type Output = <Wrapping<u128> as BitXor<Wrapping<u128>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as BitXor<Wrapping<u128>>>::Output[src]
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as BitXor<Wrapping<u128>>>::Output
impl<'_, '_> BitXor<&'_ Wrapping<u128>> for &'_ Wrapping<u128>1.14.0[src]
type Output = <Wrapping<u128> as BitXor<Wrapping<u128>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as BitXor<Wrapping<u128>>>::Output[src]
self,
other: &Wrapping<u128>
) -> <Wrapping<u128> as BitXor<Wrapping<u128>>>::Output
impl BitXor<Wrapping<isize>> for Wrapping<isize>[src]
type Output = Wrapping<isize>
The resulting type after applying the ^ operator.
fn bitxor(self, other: Wrapping<isize>) -> Wrapping<isize>[src]
impl<'a> BitXor<Wrapping<isize>> for &'a Wrapping<isize>1.14.0[src]
type Output = <Wrapping<isize> as BitXor<Wrapping<isize>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: Wrapping<isize>
) -> <Wrapping<isize> as BitXor<Wrapping<isize>>>::Output[src]
self,
other: Wrapping<isize>
) -> <Wrapping<isize> as BitXor<Wrapping<isize>>>::Output
impl<'_> BitXor<&'_ Wrapping<isize>> for Wrapping<isize>1.14.0[src]
type Output = <Wrapping<isize> as BitXor<Wrapping<isize>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as BitXor<Wrapping<isize>>>::Output[src]
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as BitXor<Wrapping<isize>>>::Output
impl<'_, '_> BitXor<&'_ Wrapping<isize>> for &'_ Wrapping<isize>1.14.0[src]
type Output = <Wrapping<isize> as BitXor<Wrapping<isize>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as BitXor<Wrapping<isize>>>::Output[src]
self,
other: &Wrapping<isize>
) -> <Wrapping<isize> as BitXor<Wrapping<isize>>>::Output
impl BitXor<Wrapping<i8>> for Wrapping<i8>[src]
type Output = Wrapping<i8>
The resulting type after applying the ^ operator.
fn bitxor(self, other: Wrapping<i8>) -> Wrapping<i8>[src]
impl<'a> BitXor<Wrapping<i8>> for &'a Wrapping<i8>1.14.0[src]
type Output = <Wrapping<i8> as BitXor<Wrapping<i8>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: Wrapping<i8>
) -> <Wrapping<i8> as BitXor<Wrapping<i8>>>::Output[src]
self,
other: Wrapping<i8>
) -> <Wrapping<i8> as BitXor<Wrapping<i8>>>::Output
impl<'_> BitXor<&'_ Wrapping<i8>> for Wrapping<i8>1.14.0[src]
type Output = <Wrapping<i8> as BitXor<Wrapping<i8>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as BitXor<Wrapping<i8>>>::Output[src]
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as BitXor<Wrapping<i8>>>::Output
impl<'_, '_> BitXor<&'_ Wrapping<i8>> for &'_ Wrapping<i8>1.14.0[src]
type Output = <Wrapping<i8> as BitXor<Wrapping<i8>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as BitXor<Wrapping<i8>>>::Output[src]
self,
other: &Wrapping<i8>
) -> <Wrapping<i8> as BitXor<Wrapping<i8>>>::Output
impl BitXor<Wrapping<i16>> for Wrapping<i16>[src]
type Output = Wrapping<i16>
The resulting type after applying the ^ operator.
fn bitxor(self, other: Wrapping<i16>) -> Wrapping<i16>[src]
impl<'a> BitXor<Wrapping<i16>> for &'a Wrapping<i16>1.14.0[src]
type Output = <Wrapping<i16> as BitXor<Wrapping<i16>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: Wrapping<i16>
) -> <Wrapping<i16> as BitXor<Wrapping<i16>>>::Output[src]
self,
other: Wrapping<i16>
) -> <Wrapping<i16> as BitXor<Wrapping<i16>>>::Output
impl<'_> BitXor<&'_ Wrapping<i16>> for Wrapping<i16>1.14.0[src]
type Output = <Wrapping<i16> as BitXor<Wrapping<i16>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as BitXor<Wrapping<i16>>>::Output[src]
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as BitXor<Wrapping<i16>>>::Output
impl<'_, '_> BitXor<&'_ Wrapping<i16>> for &'_ Wrapping<i16>1.14.0[src]
type Output = <Wrapping<i16> as BitXor<Wrapping<i16>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as BitXor<Wrapping<i16>>>::Output[src]
self,
other: &Wrapping<i16>
) -> <Wrapping<i16> as BitXor<Wrapping<i16>>>::Output
impl BitXor<Wrapping<i32>> for Wrapping<i32>[src]
type Output = Wrapping<i32>
The resulting type after applying the ^ operator.
fn bitxor(self, other: Wrapping<i32>) -> Wrapping<i32>[src]
impl<'a> BitXor<Wrapping<i32>> for &'a Wrapping<i32>1.14.0[src]
type Output = <Wrapping<i32> as BitXor<Wrapping<i32>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: Wrapping<i32>
) -> <Wrapping<i32> as BitXor<Wrapping<i32>>>::Output[src]
self,
other: Wrapping<i32>
) -> <Wrapping<i32> as BitXor<Wrapping<i32>>>::Output
impl<'_> BitXor<&'_ Wrapping<i32>> for Wrapping<i32>1.14.0[src]
type Output = <Wrapping<i32> as BitXor<Wrapping<i32>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as BitXor<Wrapping<i32>>>::Output[src]
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as BitXor<Wrapping<i32>>>::Output
impl<'_, '_> BitXor<&'_ Wrapping<i32>> for &'_ Wrapping<i32>1.14.0[src]
type Output = <Wrapping<i32> as BitXor<Wrapping<i32>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as BitXor<Wrapping<i32>>>::Output[src]
self,
other: &Wrapping<i32>
) -> <Wrapping<i32> as BitXor<Wrapping<i32>>>::Output
impl BitXor<Wrapping<i64>> for Wrapping<i64>[src]
type Output = Wrapping<i64>
The resulting type after applying the ^ operator.
fn bitxor(self, other: Wrapping<i64>) -> Wrapping<i64>[src]
impl<'a> BitXor<Wrapping<i64>> for &'a Wrapping<i64>1.14.0[src]
type Output = <Wrapping<i64> as BitXor<Wrapping<i64>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: Wrapping<i64>
) -> <Wrapping<i64> as BitXor<Wrapping<i64>>>::Output[src]
self,
other: Wrapping<i64>
) -> <Wrapping<i64> as BitXor<Wrapping<i64>>>::Output
impl<'_> BitXor<&'_ Wrapping<i64>> for Wrapping<i64>1.14.0[src]
type Output = <Wrapping<i64> as BitXor<Wrapping<i64>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as BitXor<Wrapping<i64>>>::Output[src]
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as BitXor<Wrapping<i64>>>::Output
impl<'_, '_> BitXor<&'_ Wrapping<i64>> for &'_ Wrapping<i64>1.14.0[src]
type Output = <Wrapping<i64> as BitXor<Wrapping<i64>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as BitXor<Wrapping<i64>>>::Output[src]
self,
other: &Wrapping<i64>
) -> <Wrapping<i64> as BitXor<Wrapping<i64>>>::Output
impl BitXor<Wrapping<i128>> for Wrapping<i128>[src]
type Output = Wrapping<i128>
The resulting type after applying the ^ operator.
fn bitxor(self, other: Wrapping<i128>) -> Wrapping<i128>[src]
impl<'a> BitXor<Wrapping<i128>> for &'a Wrapping<i128>1.14.0[src]
type Output = <Wrapping<i128> as BitXor<Wrapping<i128>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: Wrapping<i128>
) -> <Wrapping<i128> as BitXor<Wrapping<i128>>>::Output[src]
self,
other: Wrapping<i128>
) -> <Wrapping<i128> as BitXor<Wrapping<i128>>>::Output
impl<'_> BitXor<&'_ Wrapping<i128>> for Wrapping<i128>1.14.0[src]
type Output = <Wrapping<i128> as BitXor<Wrapping<i128>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as BitXor<Wrapping<i128>>>::Output[src]
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as BitXor<Wrapping<i128>>>::Output
impl<'_, '_> BitXor<&'_ Wrapping<i128>> for &'_ Wrapping<i128>1.14.0[src]
type Output = <Wrapping<i128> as BitXor<Wrapping<i128>>>::Output
The resulting type after applying the ^ operator.
fn bitxor(
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as BitXor<Wrapping<i128>>>::Output[src]
self,
other: &Wrapping<i128>
) -> <Wrapping<i128> as BitXor<Wrapping<i128>>>::Output
impl Shl<usize> for Wrapping<u8>[src]
type Output = Wrapping<u8>
The resulting type after applying the << operator.
fn shl(self, other: usize) -> Wrapping<u8>[src]
impl Shl<usize> for Wrapping<u16>[src]
type Output = Wrapping<u16>
The resulting type after applying the << operator.
fn shl(self, other: usize) -> Wrapping<u16>[src]
impl Shl<usize> for Wrapping<u32>[src]
type Output = Wrapping<u32>
The resulting type after applying the << operator.
fn shl(self, other: usize) -> Wrapping<u32>[src]
impl Shl<usize> for Wrapping<u64>[src]
type Output = Wrapping<u64>
The resulting type after applying the << operator.
fn shl(self, other: usize) -> Wrapping<u64>[src]
impl Shl<usize> for Wrapping<u128>[src]
type Output = Wrapping<u128>
The resulting type after applying the << operator.
fn shl(self, other: usize) -> Wrapping<u128>[src]
impl Shl<usize> for Wrapping<usize>[src]
type Output = Wrapping<usize>
The resulting type after applying the << operator.
fn shl(self, other: usize) -> Wrapping<usize>[src]
impl Shl<usize> for Wrapping<i8>[src]
type Output = Wrapping<i8>
The resulting type after applying the << operator.
fn shl(self, other: usize) -> Wrapping<i8>[src]
impl Shl<usize> for Wrapping<i16>[src]
type Output = Wrapping<i16>
The resulting type after applying the << operator.
fn shl(self, other: usize) -> Wrapping<i16>[src]
impl Shl<usize> for Wrapping<i32>[src]
type Output = Wrapping<i32>
The resulting type after applying the << operator.
fn shl(self, other: usize) -> Wrapping<i32>[src]
impl Shl<usize> for Wrapping<i64>[src]
type Output = Wrapping<i64>
The resulting type after applying the << operator.
fn shl(self, other: usize) -> Wrapping<i64>[src]
impl Shl<usize> for Wrapping<i128>[src]
type Output = Wrapping<i128>
The resulting type after applying the << operator.
fn shl(self, other: usize) -> Wrapping<i128>[src]
impl Shl<usize> for Wrapping<isize>[src]
type Output = Wrapping<isize>
The resulting type after applying the << operator.
fn shl(self, other: usize) -> Wrapping<isize>[src]
impl Shr<usize> for Wrapping<u8>[src]
type Output = Wrapping<u8>
The resulting type after applying the >> operator.
fn shr(self, other: usize) -> Wrapping<u8>[src]
impl Shr<usize> for Wrapping<u16>[src]
type Output = Wrapping<u16>
The resulting type after applying the >> operator.
fn shr(self, other: usize) -> Wrapping<u16>[src]
impl Shr<usize> for Wrapping<u32>[src]
type Output = Wrapping<u32>
The resulting type after applying the >> operator.
fn shr(self, other: usize) -> Wrapping<u32>[src]
impl Shr<usize> for Wrapping<u64>[src]
type Output = Wrapping<u64>
The resulting type after applying the >> operator.
fn shr(self, other: usize) -> Wrapping<u64>[src]
impl Shr<usize> for Wrapping<u128>[src]
type Output = Wrapping<u128>
The resulting type after applying the >> operator.
fn shr(self, other: usize) -> Wrapping<u128>[src]
impl Shr<usize> for Wrapping<usize>[src]
type Output = Wrapping<usize>
The resulting type after applying the >> operator.
fn shr(self, other: usize) -> Wrapping<usize>[src]
impl Shr<usize> for Wrapping<i8>[src]
type Output = Wrapping<i8>
The resulting type after applying the >> operator.
fn shr(self, other: usize) -> Wrapping<i8>[src]
impl Shr<usize> for Wrapping<i16>[src]
type Output = Wrapping<i16>
The resulting type after applying the >> operator.
fn shr(self, other: usize) -> Wrapping<i16>[src]
impl Shr<usize> for Wrapping<i32>[src]
type Output = Wrapping<i32>
The resulting type after applying the >> operator.
fn shr(self, other: usize) -> Wrapping<i32>[src]
impl Shr<usize> for Wrapping<i64>[src]
type Output = Wrapping<i64>
The resulting type after applying the >> operator.
fn shr(self, other: usize) -> Wrapping<i64>[src]
impl Shr<usize> for Wrapping<i128>[src]
type Output = Wrapping<i128>
The resulting type after applying the >> operator.
fn shr(self, other: usize) -> Wrapping<i128>[src]
impl Shr<usize> for Wrapping<isize>[src]
type Output = Wrapping<isize>
The resulting type after applying the >> operator.
fn shr(self, other: usize) -> Wrapping<isize>[src]
impl BitAndAssign<Wrapping<usize>> for Wrapping<usize>1.8.0[src]
fn bitand_assign(&mut self, other: Wrapping<usize>)[src]
impl<'_> BitAndAssign<&'_ Wrapping<usize>> for Wrapping<usize>1.22.0[src]
fn bitand_assign(&mut self, other: &Wrapping<usize>)[src]
impl BitAndAssign<Wrapping<u8>> for Wrapping<u8>1.8.0[src]
fn bitand_assign(&mut self, other: Wrapping<u8>)[src]
impl<'_> BitAndAssign<&'_ Wrapping<u8>> for Wrapping<u8>1.22.0[src]
fn bitand_assign(&mut self, other: &Wrapping<u8>)[src]
impl BitAndAssign<Wrapping<u16>> for Wrapping<u16>1.8.0[src]
fn bitand_assign(&mut self, other: Wrapping<u16>)[src]
impl<'_> BitAndAssign<&'_ Wrapping<u16>> for Wrapping<u16>1.22.0[src]
fn bitand_assign(&mut self, other: &Wrapping<u16>)[src]
impl BitAndAssign<Wrapping<u32>> for Wrapping<u32>1.8.0[src]
fn bitand_assign(&mut self, other: Wrapping<u32>)[src]
impl<'_> BitAndAssign<&'_ Wrapping<u32>> for Wrapping<u32>1.22.0[src]
fn bitand_assign(&mut self, other: &Wrapping<u32>)[src]
impl BitAndAssign<Wrapping<u64>> for Wrapping<u64>1.8.0[src]
fn bitand_assign(&mut self, other: Wrapping<u64>)[src]
impl<'_> BitAndAssign<&'_ Wrapping<u64>> for Wrapping<u64>1.22.0[src]
fn bitand_assign(&mut self, other: &Wrapping<u64>)[src]
impl BitAndAssign<Wrapping<u128>> for Wrapping<u128>1.8.0[src]
fn bitand_assign(&mut self, other: Wrapping<u128>)[src]
impl<'_> BitAndAssign<&'_ Wrapping<u128>> for Wrapping<u128>1.22.0[src]
fn bitand_assign(&mut self, other: &Wrapping<u128>)[src]
impl BitAndAssign<Wrapping<isize>> for Wrapping<isize>1.8.0[src]
fn bitand_assign(&mut self, other: Wrapping<isize>)[src]
impl<'_> BitAndAssign<&'_ Wrapping<isize>> for Wrapping<isize>1.22.0[src]
fn bitand_assign(&mut self, other: &Wrapping<isize>)[src]
impl BitAndAssign<Wrapping<i8>> for Wrapping<i8>1.8.0[src]
fn bitand_assign(&mut self, other: Wrapping<i8>)[src]
impl<'_> BitAndAssign<&'_ Wrapping<i8>> for Wrapping<i8>1.22.0[src]
fn bitand_assign(&mut self, other: &Wrapping<i8>)[src]
impl BitAndAssign<Wrapping<i16>> for Wrapping<i16>1.8.0[src]
fn bitand_assign(&mut self, other: Wrapping<i16>)[src]
impl<'_> BitAndAssign<&'_ Wrapping<i16>> for Wrapping<i16>1.22.0[src]
fn bitand_assign(&mut self, other: &Wrapping<i16>)[src]
impl BitAndAssign<Wrapping<i32>> for Wrapping<i32>1.8.0[src]
fn bitand_assign(&mut self, other: Wrapping<i32>)[src]
impl<'_> BitAndAssign<&'_ Wrapping<i32>> for Wrapping<i32>1.22.0[src]
fn bitand_assign(&mut self, other: &Wrapping<i32>)[src]
impl BitAndAssign<Wrapping<i64>> for Wrapping<i64>1.8.0[src]
fn bitand_assign(&mut self, other: Wrapping<i64>)[src]
impl<'_> BitAndAssign<&'_ Wrapping<i64>> for Wrapping<i64>1.22.0[src]
fn bitand_assign(&mut self, other: &Wrapping<i64>)[src]
impl BitAndAssign<Wrapping<i128>> for Wrapping<i128>1.8.0[src]
fn bitand_assign(&mut self, other: Wrapping<i128>)[src]
impl<'_> BitAndAssign<&'_ Wrapping<i128>> for Wrapping<i128>1.22.0[src]
fn bitand_assign(&mut self, other: &Wrapping<i128>)[src]
impl BitOrAssign<Wrapping<usize>> for Wrapping<usize>1.8.0[src]
fn bitor_assign(&mut self, other: Wrapping<usize>)[src]
impl<'_> BitOrAssign<&'_ Wrapping<usize>> for Wrapping<usize>1.22.0[src]
fn bitor_assign(&mut self, other: &Wrapping<usize>)[src]
impl BitOrAssign<Wrapping<u8>> for Wrapping<u8>1.8.0[src]
fn bitor_assign(&mut self, other: Wrapping<u8>)[src]
impl<'_> BitOrAssign<&'_ Wrapping<u8>> for Wrapping<u8>1.22.0[src]
fn bitor_assign(&mut self, other: &Wrapping<u8>)[src]
impl BitOrAssign<Wrapping<u16>> for Wrapping<u16>1.8.0[src]
fn bitor_assign(&mut self, other: Wrapping<u16>)[src]
impl<'_> BitOrAssign<&'_ Wrapping<u16>> for Wrapping<u16>1.22.0[src]
fn bitor_assign(&mut self, other: &Wrapping<u16>)[src]
impl BitOrAssign<Wrapping<u32>> for Wrapping<u32>1.8.0[src]
fn bitor_assign(&mut self, other: Wrapping<u32>)[src]
impl<'_> BitOrAssign<&'_ Wrapping<u32>> for Wrapping<u32>1.22.0[src]
fn bitor_assign(&mut self, other: &Wrapping<u32>)[src]
impl BitOrAssign<Wrapping<u64>> for Wrapping<u64>1.8.0[src]
fn bitor_assign(&mut self, other: Wrapping<u64>)[src]
impl<'_> BitOrAssign<&'_ Wrapping<u64>> for Wrapping<u64>1.22.0[src]
fn bitor_assign(&mut self, other: &Wrapping<u64>)[src]
impl BitOrAssign<Wrapping<u128>> for Wrapping<u128>1.8.0[src]
fn bitor_assign(&mut self, other: Wrapping<u128>)[src]
impl<'_> BitOrAssign<&'_ Wrapping<u128>> for Wrapping<u128>1.22.0[src]
fn bitor_assign(&mut self, other: &Wrapping<u128>)[src]
impl BitOrAssign<Wrapping<isize>> for Wrapping<isize>1.8.0[src]
fn bitor_assign(&mut self, other: Wrapping<isize>)[src]
impl<'_> BitOrAssign<&'_ Wrapping<isize>> for Wrapping<isize>1.22.0[src]
fn bitor_assign(&mut self, other: &Wrapping<isize>)[src]
impl BitOrAssign<Wrapping<i8>> for Wrapping<i8>1.8.0[src]
fn bitor_assign(&mut self, other: Wrapping<i8>)[src]
impl<'_> BitOrAssign<&'_ Wrapping<i8>> for Wrapping<i8>1.22.0[src]
fn bitor_assign(&mut self, other: &Wrapping<i8>)[src]
impl BitOrAssign<Wrapping<i16>> for Wrapping<i16>1.8.0[src]
fn bitor_assign(&mut self, other: Wrapping<i16>)[src]
impl<'_> BitOrAssign<&'_ Wrapping<i16>> for Wrapping<i16>1.22.0[src]
fn bitor_assign(&mut self, other: &Wrapping<i16>)[src]
impl BitOrAssign<Wrapping<i32>> for Wrapping<i32>1.8.0[src]
fn bitor_assign(&mut self, other: Wrapping<i32>)[src]
impl<'_> BitOrAssign<&'_ Wrapping<i32>> for Wrapping<i32>1.22.0[src]
fn bitor_assign(&mut self, other: &Wrapping<i32>)[src]
impl BitOrAssign<Wrapping<i64>> for Wrapping<i64>1.8.0[src]
fn bitor_assign(&mut self, other: Wrapping<i64>)[src]
impl<'_> BitOrAssign<&'_ Wrapping<i64>> for Wrapping<i64>1.22.0[src]
fn bitor_assign(&mut self, other: &Wrapping<i64>)[src]
impl BitOrAssign<Wrapping<i128>> for Wrapping<i128>1.8.0[src]
fn bitor_assign(&mut self, other: Wrapping<i128>)[src]
impl<'_> BitOrAssign<&'_ Wrapping<i128>> for Wrapping<i128>1.22.0[src]
fn bitor_assign(&mut self, other: &Wrapping<i128>)[src]
impl BitXorAssign<Wrapping<usize>> for Wrapping<usize>1.8.0[src]
fn bitxor_assign(&mut self, other: Wrapping<usize>)[src]
impl<'_> BitXorAssign<&'_ Wrapping<usize>> for Wrapping<usize>1.22.0[src]
fn bitxor_assign(&mut self, other: &Wrapping<usize>)[src]
impl BitXorAssign<Wrapping<u8>> for Wrapping<u8>1.8.0[src]
fn bitxor_assign(&mut self, other: Wrapping<u8>)[src]
impl<'_> BitXorAssign<&'_ Wrapping<u8>> for Wrapping<u8>1.22.0[src]
fn bitxor_assign(&mut self, other: &Wrapping<u8>)[src]
impl BitXorAssign<Wrapping<u16>> for Wrapping<u16>1.8.0[src]
fn bitxor_assign(&mut self, other: Wrapping<u16>)[src]
impl<'_> BitXorAssign<&'_ Wrapping<u16>> for Wrapping<u16>1.22.0[src]
fn bitxor_assign(&mut self, other: &Wrapping<u16>)[src]
impl BitXorAssign<Wrapping<u32>> for Wrapping<u32>1.8.0[src]
fn bitxor_assign(&mut self, other: Wrapping<u32>)[src]
impl<'_> BitXorAssign<&'_ Wrapping<u32>> for Wrapping<u32>1.22.0[src]
fn bitxor_assign(&mut self, other: &Wrapping<u32>)[src]
impl BitXorAssign<Wrapping<u64>> for Wrapping<u64>1.8.0[src]
fn bitxor_assign(&mut self, other: Wrapping<u64>)[src]
impl<'_> BitXorAssign<&'_ Wrapping<u64>> for Wrapping<u64>1.22.0[src]
fn bitxor_assign(&mut self, other: &Wrapping<u64>)[src]
impl BitXorAssign<Wrapping<u128>> for Wrapping<u128>1.8.0[src]
fn bitxor_assign(&mut self, other: Wrapping<u128>)[src]
impl<'_> BitXorAssign<&'_ Wrapping<u128>> for Wrapping<u128>1.22.0[src]
fn bitxor_assign(&mut self, other: &Wrapping<u128>)[src]
impl BitXorAssign<Wrapping<isize>> for Wrapping<isize>1.8.0[src]
fn bitxor_assign(&mut self, other: Wrapping<isize>)[src]
impl<'_> BitXorAssign<&'_ Wrapping<isize>> for Wrapping<isize>1.22.0[src]
fn bitxor_assign(&mut self, other: &Wrapping<isize>)[src]
impl BitXorAssign<Wrapping<i8>> for Wrapping<i8>1.8.0[src]
fn bitxor_assign(&mut self, other: Wrapping<i8>)[src]
impl<'_> BitXorAssign<&'_ Wrapping<i8>> for Wrapping<i8>1.22.0[src]
fn bitxor_assign(&mut self, other: &Wrapping<i8>)[src]
impl BitXorAssign<Wrapping<i16>> for Wrapping<i16>1.8.0[src]
fn bitxor_assign(&mut self, other: Wrapping<i16>)[src]
impl<'_> BitXorAssign<&'_ Wrapping<i16>> for Wrapping<i16>1.22.0[src]
fn bitxor_assign(&mut self, other: &Wrapping<i16>)[src]
impl BitXorAssign<Wrapping<i32>> for Wrapping<i32>1.8.0[src]
fn bitxor_assign(&mut self, other: Wrapping<i32>)[src]
impl<'_> BitXorAssign<&'_ Wrapping<i32>> for Wrapping<i32>1.22.0[src]
fn bitxor_assign(&mut self, other: &Wrapping<i32>)[src]
impl BitXorAssign<Wrapping<i64>> for Wrapping<i64>1.8.0[src]
fn bitxor_assign(&mut self, other: Wrapping<i64>)[src]
impl<'_> BitXorAssign<&'_ Wrapping<i64>> for Wrapping<i64>1.22.0[src]
fn bitxor_assign(&mut self, other: &Wrapping<i64>)[src]
impl BitXorAssign<Wrapping<i128>> for Wrapping<i128>1.8.0[src]
fn bitxor_assign(&mut self, other: Wrapping<i128>)[src]
impl<'_> BitXorAssign<&'_ Wrapping<i128>> for Wrapping<i128>1.22.0[src]
fn bitxor_assign(&mut self, other: &Wrapping<i128>)[src]
impl ShlAssign<usize> for Wrapping<u8>1.8.0[src]
fn shl_assign(&mut self, other: usize)[src]
impl<'_> ShlAssign<&'_ usize> for Wrapping<u8>1.22.0[src]
fn shl_assign(&mut self, other: &usize)[src]
impl ShlAssign<usize> for Wrapping<u16>1.8.0[src]
fn shl_assign(&mut self, other: usize)[src]
impl<'_> ShlAssign<&'_ usize> for Wrapping<u16>1.22.0[src]
fn shl_assign(&mut self, other: &usize)[src]
impl ShlAssign<usize> for Wrapping<u32>1.8.0[src]
fn shl_assign(&mut self, other: usize)[src]
impl<'_> ShlAssign<&'_ usize> for Wrapping<u32>1.22.0[src]
fn shl_assign(&mut self, other: &usize)[src]
impl ShlAssign<usize> for Wrapping<u64>1.8.0[src]
fn shl_assign(&mut self, other: usize)[src]
impl<'_> ShlAssign<&'_ usize> for Wrapping<u64>1.22.0[src]
fn shl_assign(&mut self, other: &usize)[src]
impl ShlAssign<usize> for Wrapping<u128>1.8.0[src]
fn shl_assign(&mut self, other: usize)[src]
impl<'_> ShlAssign<&'_ usize> for Wrapping<u128>1.22.0[src]
fn shl_assign(&mut self, other: &usize)[src]
impl ShlAssign<usize> for Wrapping<usize>1.8.0[src]
fn shl_assign(&mut self, other: usize)[src]
impl<'_> ShlAssign<&'_ usize> for Wrapping<usize>1.22.0[src]
fn shl_assign(&mut self, other: &usize)[src]
impl ShlAssign<usize> for Wrapping<i8>1.8.0[src]
fn shl_assign(&mut self, other: usize)[src]
impl<'_> ShlAssign<&'_ usize> for Wrapping<i8>1.22.0[src]
fn shl_assign(&mut self, other: &usize)[src]
impl ShlAssign<usize> for Wrapping<i16>1.8.0[src]
fn shl_assign(&mut self, other: usize)[src]
impl<'_> ShlAssign<&'_ usize> for Wrapping<i16>1.22.0[src]
fn shl_assign(&mut self, other: &usize)[src]
impl ShlAssign<usize> for Wrapping<i32>1.8.0[src]
fn shl_assign(&mut self, other: usize)[src]
impl<'_> ShlAssign<&'_ usize> for Wrapping<i32>1.22.0[src]
fn shl_assign(&mut self, other: &usize)[src]
impl ShlAssign<usize> for Wrapping<i64>1.8.0[src]
fn shl_assign(&mut self, other: usize)[src]
impl<'_> ShlAssign<&'_ usize> for Wrapping<i64>1.22.0[src]
fn shl_assign(&mut self, other: &usize)[src]
impl ShlAssign<usize> for Wrapping<i128>1.8.0[src]
fn shl_assign(&mut self, other: usize)[src]
impl<'_> ShlAssign<&'_ usize> for Wrapping<i128>1.22.0[src]
fn shl_assign(&mut self, other: &usize)[src]
impl ShlAssign<usize> for Wrapping<isize>1.8.0[src]
fn shl_assign(&mut self, other: usize)[src]
impl<'_> ShlAssign<&'_ usize> for Wrapping<isize>1.22.0[src]
fn shl_assign(&mut self, other: &usize)[src]
impl ShrAssign<usize> for Wrapping<u8>1.8.0[src]
fn shr_assign(&mut self, other: usize)[src]
impl<'_> ShrAssign<&'_ usize> for Wrapping<u8>1.22.0[src]
fn shr_assign(&mut self, other: &usize)[src]
impl ShrAssign<usize> for Wrapping<u16>1.8.0[src]
fn shr_assign(&mut self, other: usize)[src]
impl<'_> ShrAssign<&'_ usize> for Wrapping<u16>1.22.0[src]
fn shr_assign(&mut self, other: &usize)[src]
impl ShrAssign<usize> for Wrapping<u32>1.8.0[src]
fn shr_assign(&mut self, other: usize)[src]
impl<'_> ShrAssign<&'_ usize> for Wrapping<u32>1.22.0[src]
fn shr_assign(&mut self, other: &usize)[src]
impl ShrAssign<usize> for Wrapping<u64>1.8.0[src]
fn shr_assign(&mut self, other: usize)[src]
impl<'_> ShrAssign<&'_ usize> for Wrapping<u64>1.22.0[src]
fn shr_assign(&mut self, other: &usize)[src]
impl ShrAssign<usize> for Wrapping<u128>1.8.0[src]
fn shr_assign(&mut self, other: usize)[src]
impl<'_> ShrAssign<&'_ usize> for Wrapping<u128>1.22.0[src]
fn shr_assign(&mut self, other: &usize)[src]
impl ShrAssign<usize> for Wrapping<usize>1.8.0[src]
fn shr_assign(&mut self, other: usize)[src]
impl<'_> ShrAssign<&'_ usize> for Wrapping<usize>1.22.0[src]
fn shr_assign(&mut self, other: &usize)[src]
impl ShrAssign<usize> for Wrapping<i8>1.8.0[src]
fn shr_assign(&mut self, other: usize)[src]
impl<'_> ShrAssign<&'_ usize> for Wrapping<i8>1.22.0[src]
fn shr_assign(&mut self, other: &usize)[src]
impl ShrAssign<usize> for Wrapping<i16>1.8.0[src]
fn shr_assign(&mut self, other: usize)[src]
impl<'_> ShrAssign<&'_ usize> for Wrapping<i16>1.22.0[src]
fn shr_assign(&mut self, other: &usize)[src]
impl ShrAssign<usize> for Wrapping<i32>1.8.0[src]
fn shr_assign(&mut self, other: usize)[src]
impl<'_> ShrAssign<&'_ usize> for Wrapping<i32>1.22.0[src]
fn shr_assign(&mut self, other: &usize)[src]
impl ShrAssign<usize> for Wrapping<i64>1.8.0[src]
fn shr_assign(&mut self, other: usize)[src]
impl<'_> ShrAssign<&'_ usize> for Wrapping<i64>1.22.0[src]
fn shr_assign(&mut self, other: &usize)[src]
impl ShrAssign<usize> for Wrapping<i128>1.8.0[src]
fn shr_assign(&mut self, other: usize)[src]
impl<'_> ShrAssign<&'_ usize> for Wrapping<i128>1.22.0[src]
fn shr_assign(&mut self, other: &usize)[src]
impl ShrAssign<usize> for Wrapping<isize>1.8.0[src]
fn shr_assign(&mut self, other: usize)[src]
impl<'_> ShrAssign<&'_ usize> for Wrapping<isize>1.22.0[src]
fn shr_assign(&mut self, other: &usize)[src]
impl<T: PartialEq> PartialEq<Wrapping<T>> for Wrapping<T>[src]
impl<T: Eq> Eq for Wrapping<T>[src]
impl<T: Ord> Ord for Wrapping<T>[src]
fn cmp(&self, other: &Wrapping<T>) -> Ordering[src]
fn max(self, other: Self) -> Self where
Self: Sized, 1.21.0[src]
Self: Sized,
Compares and returns the maximum of two values. Read more
fn min(self, other: Self) -> Self where
Self: Sized, 1.21.0[src]
Self: Sized,
Compares and returns the minimum of two values. Read more
fn clamp(self, min: Self, max: Self) -> Self where
Self: Sized, [src]
Self: Sized,
Restrict a value to a certain interval. Read more
impl<T: PartialOrd> PartialOrd<Wrapping<T>> for Wrapping<T>[src]
fn partial_cmp(&self, other: &Wrapping<T>) -> Option<Ordering>[src]
fn lt(&self, other: &Wrapping<T>) -> bool[src]
fn le(&self, other: &Wrapping<T>) -> bool[src]
fn gt(&self, other: &Wrapping<T>) -> bool[src]
fn ge(&self, other: &Wrapping<T>) -> bool[src]
impl<T: Clone> Clone for Wrapping<T>[src]
fn clone(&self) -> Wrapping<T>[src]
fn clone_from(&mut self, source: &Self)[src]
Performs copy-assignment from source. Read more
impl<T: Default> Default for Wrapping<T>[src]
impl Sum<Wrapping<i8>> for Wrapping<i8>1.14.0[src]
impl<'a> Sum<&'a Wrapping<i8>> for Wrapping<i8>1.14.0[src]
impl Sum<Wrapping<i16>> for Wrapping<i16>1.14.0[src]
impl<'a> Sum<&'a Wrapping<i16>> for Wrapping<i16>1.14.0[src]
impl Sum<Wrapping<i32>> for Wrapping<i32>1.14.0[src]
impl<'a> Sum<&'a Wrapping<i32>> for Wrapping<i32>1.14.0[src]
impl Sum<Wrapping<i64>> for Wrapping<i64>1.14.0[src]
impl<'a> Sum<&'a Wrapping<i64>> for Wrapping<i64>1.14.0[src]
impl Sum<Wrapping<i128>> for Wrapping<i128>1.14.0[src]
impl<'a> Sum<&'a Wrapping<i128>> for Wrapping<i128>1.14.0[src]
impl Sum<Wrapping<isize>> for Wrapping<isize>1.14.0[src]
impl<'a> Sum<&'a Wrapping<isize>> for Wrapping<isize>1.14.0[src]
impl Sum<Wrapping<u8>> for Wrapping<u8>1.14.0[src]
impl<'a> Sum<&'a Wrapping<u8>> for Wrapping<u8>1.14.0[src]
impl Sum<Wrapping<u16>> for Wrapping<u16>1.14.0[src]
impl<'a> Sum<&'a Wrapping<u16>> for Wrapping<u16>1.14.0[src]
impl Sum<Wrapping<u32>> for Wrapping<u32>1.14.0[src]
impl<'a> Sum<&'a Wrapping<u32>> for Wrapping<u32>1.14.0[src]
impl Sum<Wrapping<u64>> for Wrapping<u64>1.14.0[src]
impl<'a> Sum<&'a Wrapping<u64>> for Wrapping<u64>1.14.0[src]
impl Sum<Wrapping<u128>> for Wrapping<u128>1.14.0[src]
impl<'a> Sum<&'a Wrapping<u128>> for Wrapping<u128>1.14.0[src]
impl Sum<Wrapping<usize>> for Wrapping<usize>1.14.0[src]
impl<'a> Sum<&'a Wrapping<usize>> for Wrapping<usize>1.14.0[src]
impl Product<Wrapping<i8>> for Wrapping<i8>1.14.0[src]
impl<'a> Product<&'a Wrapping<i8>> for Wrapping<i8>1.14.0[src]
impl Product<Wrapping<i16>> for Wrapping<i16>1.14.0[src]
impl<'a> Product<&'a Wrapping<i16>> for Wrapping<i16>1.14.0[src]
impl Product<Wrapping<i32>> for Wrapping<i32>1.14.0[src]
impl<'a> Product<&'a Wrapping<i32>> for Wrapping<i32>1.14.0[src]
impl Product<Wrapping<i64>> for Wrapping<i64>1.14.0[src]
impl<'a> Product<&'a Wrapping<i64>> for Wrapping<i64>1.14.0[src]
impl Product<Wrapping<i128>> for Wrapping<i128>1.14.0[src]
impl<'a> Product<&'a Wrapping<i128>> for Wrapping<i128>1.14.0[src]
impl Product<Wrapping<isize>> for Wrapping<isize>1.14.0[src]
impl<'a> Product<&'a Wrapping<isize>> for Wrapping<isize>1.14.0[src]
impl Product<Wrapping<u8>> for Wrapping<u8>1.14.0[src]
impl<'a> Product<&'a Wrapping<u8>> for Wrapping<u8>1.14.0[src]
impl Product<Wrapping<u16>> for Wrapping<u16>1.14.0[src]
impl<'a> Product<&'a Wrapping<u16>> for Wrapping<u16>1.14.0[src]
impl Product<Wrapping<u32>> for Wrapping<u32>1.14.0[src]
impl<'a> Product<&'a Wrapping<u32>> for Wrapping<u32>1.14.0[src]
impl Product<Wrapping<u64>> for Wrapping<u64>1.14.0[src]
impl<'a> Product<&'a Wrapping<u64>> for Wrapping<u64>1.14.0[src]
impl Product<Wrapping<u128>> for Wrapping<u128>1.14.0[src]
impl<'a> Product<&'a Wrapping<u128>> for Wrapping<u128>1.14.0[src]
impl Product<Wrapping<usize>> for Wrapping<usize>1.14.0[src]
impl<'a> Product<&'a Wrapping<usize>> for Wrapping<usize>1.14.0[src]
impl<T: Hash> Hash for Wrapping<T>[src]
fn hash<__HT: Hasher>(&self, state: &mut __HT)[src]
fn hash_slice<H: Hasher>(data: &[Self], state: &mut H) where
Self: Sized, 1.3.0[src]
Self: Sized,
Feeds a slice of this type into the given [Hasher]. Read more
impl<T: Debug> Debug for Wrapping<T>[src]
impl<T: Display> Display for Wrapping<T>1.10.0[src]
impl<T: Octal> Octal for Wrapping<T>1.11.0[src]
impl<T: Binary> Binary for Wrapping<T>1.11.0[src]
impl<T: LowerHex> LowerHex for Wrapping<T>1.11.0[src]
impl<T: UpperHex> UpperHex for Wrapping<T>1.11.0[src]
Auto Trait Implementations
Blanket Implementations
impl<T, U> Into<U> for T where
U: From<T>, [src]
U: From<T>,
impl<T> From<T> for T[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>, [src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(Self) -> Result<U, <U as TryFrom<T>>::Error>[src]
impl<T, U> TryFrom<U> for T where
U: Into<T>, [src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(U) -> Result<T, <T as TryFrom<U>>::Error>[src]
impl<T> Borrow<T> for T where
T: ?Sized, [src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized, [src]
T: ?Sized,
fn borrow_mut(&mut Self) -> &mut T[src]
impl<T> Any for T where
T: 'static + ?Sized, [src]
T: 'static + ?Sized,